Installing The Elite Panaboard Software; Installing The Software - Panasonic UB-T880 Manual

Installing the elite Panaboard software

The elite Panaboard software must be installed on every computer being connected to the elite Panaboard.
Note
• Don't connect the elite Panaboard to the computer until the driver installation is completed.

Installing the software

1. Double-click the elite Panaboard installer [elite Panaboard UB-T8.mpkg].
2. Follow the on-screen instructions.
If you select [Customize] in the "Install elite Panaboard UB-T8" screen, you will be able to select custom
settings.
Note
• If "elite Panaboard software" is not installed, the Select Function Menu cannot be used.
3. Restart the computer.
Restart the computer if you are prompted to do so.
After the elite Panaboard software has been installed, the following application will be found in the
[Panasonic] folder of the Applications folder:
[elite Panaboard software] folder (only when elite Panaboard software is installed)
• elite Panaboard software – start elite Panaboard software
• Uninstall elite Panaboard software – uninstall elite Panaboard software
[elite Panaboard UB-T8] folder
• elite Panaboard Calibration – used to calibrate the elite Panaboard
• Uninstall elite Panaboard UB-T8 – uninstall elite Panaboard driver and Calibration utility
Before using the elite Panaboard, it must be calibrated. Calibration is described in the
Calibration" section.
Note
• Change settings as follows to use the On-Screen Keyboard.
For Mac OS X 10.5.8:
Select [Keyboard Viewer] check box in [System Preferences] – [International] – [Input Menu].
For Mac OS X 10.6.8 or 10.7.1:
Select [Show Keyboard & Character Viewer in menu bar] check box in [System Preferences] –
[Keyboard] – [Keyboard].
― 4 ―
"Performing