Using On-Site Operation Panel
5.2 Overview of Operator Elements and Display Elements
Operator Element/Display
Element
54
Function
Display of operability
Green LED (Run)
The device is switched on. The presence of the external auxiliary voltage is
indicated to you.
Red LED (Error)
The device is not ready to run or a fault is present. The life contact is open.
After successful start of the device, the LED goes out, indicating to you that
the device is ready for operation.
Navigation keys
By pressing or holding down the navigation keys, you can navigate in the
menus, lists and the graphical images (default display, control display).
Menus and lists (press key):
•
Top
–
Display entry above
•
Bottom
–
Display entry below
•
Right
–
Display level below
•
Left
–
Display level above
Menus and lists (hold key):
•
Top
–
Move forward by one display length
•
Bottom
–
Backward by a display length
•
Right
–
Display level below
•
Left
–
Back to the default display
Control displays (press/hold key):
Control displays are available only on the large display. Navigation between
pages and switching objects is done according to the sequences defined in
the DIGSI 5 Display editor.
•
Top
–
To the previous switching object
•
Bottom
–
To the next switching object
•
Right
–
To the next page
•
Left
–
To the previous page
Default displays (press/hold key):
Navigation between the default displays (pages) is done according to the
sequences defined in the DIGSI 5 Display editor.
•
Right
–
To the next page
•
Left
–
To the previous page (sequence as laid down in DIGSI 5)
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016