Display Settings - Pioneer SGX-CA600 User Manual

Setting item
Enable
GPS Speed
GPS Status
*: Factory default setting

Display Settings

Configure the settings related to the display.
The settings are saved linked to the selected bike.
1
Press the [Menu] button.
Description
Enable* or disable the GPS function.
You can enable GPS also in the status display by press-
ing and holding the [Confirm] button for 2 seconds or
more from the meter screen.
Turn on* or off the GPS speed function.
Select this check box to display the speed at which the
GPS information was obtained.
This can be selected only when GPS is enabled.
Errors may be generated between the displayed values
and actual positions depending on the signal conditions.
Display the GPS positioning status (OFF/2D/3D).
Furthermore, the satellites for which signals were cap-
tured are indicated by a number (#), and the satellite
numbers with an + mark were those used for GPS
positioning.
275