Accu-Chek Aviva Manual

Testing your blood glucose
When your meter is new
Everyday testing
1
Insert a test strip into the meter
in the direction of the arrow.
The meter will turn on
automatically. A test strip and
flashing blood drop symbol will
then appear on the display.
The meter is now ready.
The result appears on the display.
When you open a new pot of strips
1
Make sure the meter is
turned off. Insert the
code chip into the side
of the meter until it
clicks into place.
2
Use the Multiclix finger pricker
to get a blood sample (see over).
2
Make sure the code
number on the display
matches the code
number on the test
strip container.
3
Touch the blood drop to the
front edge of the yellow window
of the test strip. When there is
sufficient blood on the test strip
to get a reading an hourglass
will flash in the display.