Taking Calls For Colleagues In A Team; Picking Up A Specific Team Call - Siemens Hicom 300 E User Manual

Step by Step
C
and
Waiting call
or
Waiting call
Waiting call
Disconnect
Direct call pickup?

Taking calls for colleagues in a team

If a memb er of a team does not answer a call within 15
seconds (depending on the system), the other mem-
bers of the team hear an aler ting tone.
Telephone in the idle state:
The telephone rings. The display shows: "Call for...".
Lift the handset and press the flashing key. You have
now taken over the call.
Press the flashing key only.
You are in the speakerphone mode.
In the course of a call:
Press the flashing key.
The first party waits while you are connected to the
waiting p arty (Æ page 74).
Ending the waiting call – back to the first:
Press the key.

Picking up a specific team call

You hear another telephone ring and you know its sta-
tion number or a colleague asks you (verbally) to pick up
a call for a specific telephone.
If you do not know the numb er, you can have it dis-
played (Æ page 82).
C
Lift the handset.
Select and confirm.
E
Enter the station number of the telephone for which
you wish to (or have been requested to) pick up the call.
In this way you pick up the call.
Making multiline and team calls
81 81 81 81