Labelling, Documentation And Accessories; Key Labels; Attaching The Telephone Number Label; Using The Key Labelling Programme - Siemens 300 H Operating Instructions Manual

Labelling, documentation and accessories

Labelling, documentation and accessories

Key labels

For each telephone/add-on unit you are supplied with sheets of pre-
punched key labels, which you can use to label your programmable keys
and the fixed function keys.
with the foil supplied (matt surface uppermost), as indicated in the illustra-
tion.

Attaching the telephone number label

For each telephone a sheet of adhesive telephone number labels is sup-
plied.
Fill in the number label (fire service, police, own number), peel it off and
attach it to the recess on the telephone (after lifting the handset).

Using the key labelling programme

The insert sheets for all optiset E units can be lettered by System Support
using labelling programme WINTASBE (order no. P31003-E80-T101- -19).
In the case of many optiset E units, we recommend the use of DIN A4
sheets (A31003-E80-T100- -19) on which all the insert strips are pre-
punched.
88 88 88 88
To insert the label for your fixed
function keys, simply lift one of the
small pre-punched labels off the
sheet and attach it, covering it with
the foil supplied (matt surface up-
permost), as indicated in the illus-
tration.
To label your programmable keys
(soft keys), write the stored num-
bers or the Hicom functions in the
appropriate white boxes on one of
the large labels, detach it from the
label sheet and insert it, covering it