Siemens Electrical Lean Switch Installation Instructions Manual page 55

Industrial ethernet electrical lean switch
Table of Contents

Advertisement

● IP address
IP address of the ELS (maximum range per field: 0 to 255). If you enter an
invalid IP address, a warning is displayed and the input is rejected.
● Subnet mask
Subnet mask of the ELS (maximum range of numbers per field: 0 to 255).
● Router (default gateway)
Enter the IP address of the default gateway if the PC/Internet Browser is not in
the same subnet as the ELS.
Note
Changing the parameters resets and restarts the ELS. This can take up to 15
seconds.
3. Close the folder by clicking on the icon in the menu tree again and download
your configuration to the ELS
by selecting Module -> Download.
A progress bar indicates the status of the download.
You can also start this action directly using the appropriate icons in the toolbar
(see Figure 6-8).
Figure 6-8 Direct Start: "Download Module"
Industrial Ethernet
A5E00152007-03
Diagnostics over Industrial Ethernet
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic net

Table of Contents