Siemens ISI EN 50295 Brochure page 141

■
Technical specifications
Output current in A
Rated input voltage in V
Input
• Rated input voltage U in V
e rated
• Range selection
• Input voltage range in V
• Overvoltage resistance
• Mains buffering at I in ms
e rated
• Mains frequency rated value I range
in Hz
• Input current rating I in A
e rated
• Built-in input fuse in A
Output
• Stabilized floating DC voltage
acc. to AS-Interface specification
• Rated output voltage U
a rated
• Total tolerance
• Residual ripple in mVpp
• Spikes in mVpp
• Operational display
• Output current rating I in A
a rated
Efficiency/power loss
• Efficiency at U , I in %
a rated a rated
• Power loss at U , I
a rated a rated
Protection and monitoring functions
• Output overvoltage protection
• Current limitation in A
• Short-circuit protection
Safety
• Primary/secondary isolation
• Safety class
• Degree of protection
• Approvals
EMC
• Emitted interference
• Noise immunity
Operational data
• Ambient temperature range in °C
• Transport and storage
temperature range in °C
• Humidity class
Mechanical data
• Input connection
• Output connection AS-i +
• Output connection AS-i -
• Output connection Ground
• Dimensions (W x H x D) in mm
• Mounting
Special function
Accessories
1) The counterpart is not included in the scope of supply (see accessories).
AS-Interface IP65 power supply unit
Rated input voltage 230 V AC
3RX9 311-0AA00
2.4
230 AC
230 AC
Changeover contact (internal)
195 to 253
EN 61 000-4-1
> 20
50/60/47 to 63
< 0.5
T 2 (not accessible)
Yes
in V 30 DC (AS-Interface)
29.5 to 31.6 V DC
< 300
< 50
Green LED
2.4 (power boost 2.8)
Approx. 85
in W Approx. 10
No
> 2.8
Yes
Yes (SELV to EN 60 950)
Class I to IEC 536
IP65
CE, UL, CSA (in preparation)
EN 50 081-1
EN 50 082-2
-45 to +55
-45 to +60
Max. 80% rel. humidity
Amphenol device socket
AS-i+/AS-i: via yellow AS-Interface cable
FK line adapter
--
´ ´
105 155 117
Mounting onto standard rails
DIN EN 50 022-35 x 7.5
--
--
AS-Interface Power Supply Units
Rated input voltage 24 V DC
6EP1 632-1AL01
2.4
24 DC
24 DC
--
20.4 to 28.8 DC
35 V DC for max. 500 ms
> 10
--
3.6
T 6.3 (not accessible)
Yes
30 DC (AS-Interface)
29.5 to 31.6 V DC
< 300
< 50
Green LED
2.4
> 81
< 17
--
From approx. 2.9
Stabilized current approx. 2.9 A
Yes (SELV to EN 60 950)
Class I to IEC 536
IP65
CE, UL, ship building
EN 50 081-1, EN 55 022 Cl. B
EN 50 082-2
-25 to +55
-25 to +85
F to DIN 40 040
Circular connector 0.5 to 2.5 mm
500 mm 3-wire conductor AWG 14
500 mm 3-wire conductor AWG 14
500 mm 3-wire conductor AWG 14
´ ´
224 80
Wall mounting
--
6-pole connector for input voltage (6ES5 760-2CA11)
and AS-Interface coupling module PG
(3RG9 220-0AA00) must be ordered separately
Power supply units IP65
21
)
57
Siemens IK PI · 2004
6
6/141