Siemens SINUMERIK 840C Installation Instructions Manual page 566

04.96
1652
Default value
0000
Input of address of memory location to be monitored via the min/max memory function.
Note:
This machine data is operative only if the signal number is set to 0 (see MD 1651).
Caution:
This machine data is relevant only for Siemens-internal purposes and must not be altered.
1653
Default value
0000 0000
Output of display value of min/max memory minimum value.
1654
Default value
0000 0000
Output of display value of min/max memory maximum value.
©
Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
Memory location min/max memory
Lower input limit Upper input limit
0000
Minimum value min/max memory
Lower output limit Upper output limit
0000 0000 FFFF FFFF
Maximum value min/max memory
Lower output limit Upper output limit
0000 0000 FFFF FFFF
6FC5197- AA50
7 Drive Machine Data (SIMODRIVE Drive MD)
7.3.2 Drive MD (data description)
Units
FFFF Hex
Units
Hex
Units
Hex
Active
at once
Active
at once
Active
at once
7–151