Chapter 2
2-14
AceLink ADSL Modem Setup
5. POTS Micro-filter Connection
Connect your AceLink ADSL modem to a telephone using a micro-filter by
following the procedures below.
Pull out the telephone line currently in use from your wall jack and
connect it to the AceLink ADSL modem's Line port.
With the provided RJ-11 telephone cable, connect one side to the POTS
micro-filter LINE port, the other side to the AceLink ADSL modem's
Phone port.
Connect RJ-11 telephone cable attached to POTS micro-filter to Y-jack
port.
Connect RJ-11 telephone cable from Y-jack port to telephone.
Reverse-wire remaining Y-jack port.
Line port
Phone port
LINE port
Figure 2-9 POTS micro-filter connection
Reverse Wiring
PHONE port