Advertisement
Installation
method
8
Before installing the product....
- This product (PSH0731B) is developed for indoor use and can
only be used indoors.
- To prevent the product from falling by wind or external force,
use bolt and nut of M12 or higher.
- This product has been developed to face downward. Install
and use the product facing down.
- Make sure that objects do not interfere with the cooling of the
product and make sure that the inlet/outlet is not sealed.
- When installing in a location where the environment exceeds
the applicable temperature and humidity, consult with the
service center since it can cause unexpected problems.
- Consult the service center when installing in a location where
chemical material, such as TCE system or chloride gas or
where vibration is very strong since it can cause unexpected
problems affecting the life span of the product.
- When using in a location where dust is very heavy, it can
cause the illumination reduction from the dust. It requires
periodical cleaning and cannot be installed in a location where
metallic dust is heavy.
Product size
Advertisement
