RRU3931E
Installation Guide
3.
4.
Check the steel belt installation status from the visible window. If the rotation axis is close to
the end of the bolt, remove the steel belt and fasten it again. See
Figure 1-14 Check the rotation axis status
(1) Rotation axis
Step 3 Fit the RRU3931E onto the Mounting bracket, and use an M6 hex key screwdriver to torque
the screw to 5 N·m. See
Issue Draft A (2016-03-30)
Restore the bolt in position on the mounting base of the steel belt. See
Figure 1-13 Restoring the bolt in position on the mounting base
Use an M6 hex key screwdriver to torque the bolts to 7 N·m.
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-15.
1 RRU3931E Installation Guide
Figure
1-13.
Figure
1-13.
16