Date/Time/Day Adjustment; Date Setting - Toshiba Strata DK16 User Manual

STRATA DK ADD-ON MODULE / DSS CONSOLE
To set the Date:
1. Make sure the handset is on-
hook.
2. Press the Intercom
button and dial 6 5 1.
3. Enter the date in the
"YYMMDD" format.
4. Press the Redial button.
Different ringing patterns are chosen by pressing the Night button (or the
Night 1 or Night 2 button; see notes that follow). Each ringing pattern has
distinct CO line-to-station ringing assignments.
Depending upon system programming, either two or three ringing
patterns are available. The active pattern is shown by the state of the
Night button LED:
DAY
DAY 2
NIGHT
NOTES:
1. For Non-tenant Service: The ringing state can be changed by any
DSS console(s).
2. For Tenant Service: CO lines are assigned and controlled
independently:
Night 1 , TENANT 1 CO Lines
Night 2 , TENANT 2 CO Lines
3. In Tenant Service, one system is split so two businesses can use
their telephones independently of each other.

DATE/TIME/DAY ADJUSTMENT

This operation is possible from Station 10 (usually), which must always
be a Digital telephone for Strata DK8 or DK16. Station 10 is typically an
attendant station with an Add-on Module (ADM) or DSS console (DK 16
only).

DATE SETTING

Listen for confirmation tone.
YYMMDD = Year/Month/Day. Enter a leading 0 for any single digit
entered. Example: To enter January 2, 1993, enter "930102".
Two-pattern Three-pattern
OFF OFF
N/A FLASH
ON ON
DSS CONSOLE
2-5