Storing Channels In Memory (Automatic Method) - Samsung TX-R2728 Owner's Instructions Manual

O
P E R AT I O N

Storing Channels in Memory (Automatic Method)

1
First, select the correct
signal source (Air, STD,
HRC, IRC). See steps 1~3
on previous page.
2
Press the or button
to select "Auto Program"
and then press the ENTER
button.
The "Auto Program" is
automatically displayed.
3
Press the ENTER button
to start "Auto Program".
The TV will begin memo-
rizing all of the available
channels.
After all the available
channels are stored, the
Channel menu reappears.
Press the MENU button to
skip and press the ENTER
button to stop.
Press the EXIT button to
exit.
Channel
Auto Program ˆ ˆ
Add/Delete : Deleted ˆ ˆ
Air/CATV : Air
Name : ----
Move Adjust Return
Channel
Auto Program ˆ ˆ
Add/Delete : Deleted ˆ ˆ
Air/CATV : Air
Name : ----
Move Enter Return
Auto Program
Air 3
Start
Enter Return
Auto Program
Air 5
Stop
Enter Return
The TV automatically cycles
through all of the available channels
and stores them in memory.
This takes about one to two minutes.
25