bgp log-neighbor-changes
Enable logging of BGP neighbor resets.
C9000 Series
Syntax
bgp log-neighbor-changes
To disable logging, use the no bgp log-neighbor-changes command.
Defaults
Enabled
Command Modes
ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.11.1
7.8.1.0
7.7.1.0
Usage Information To view BGP neighbor resets, use the show logging command in EXEC mode.
The bgp log-neighbor-changes command appears in the show config command
output.
Related
show logging
Commands
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems.
C9000 Series
Syntax
bgp non-deterministic-med
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
— views logging settings and system messages logged to the system.
Border Gateway Protocol
434