LG Qua Tab 01 Notes On Usage

When Using the Product
Before using the product, be sure to read the "Safety Precautions" in this
manual for proper usage.
Before you assume that the product is malfunctioning, check for possible
remedies in the following au Customer Support site of au homepage:
Notes on Usage
http://www.au.kddi.com/english/support/
• During communication, maintain a 1.5-cm separation from yourself with no
metal (parts) located in between.
• Communication is not possible even inside the service area in places where
the signal does not reach (e.g. tunnels and basements). Also,
communication is sometimes not possible in poor reception areas.
Communication is sometimes interrupted if you move into a poor reception
areas during communications.
• Since this product uses radio waves, the possibility of communication
interception by third parties cannot be eliminated. (Although, the 4G (LTE/
WiMAX 2+) system has highly secure confidential communication features.)
• This Product is designed for use in Japan only and cannot be used in any
other country.
• Since this product is a radio station under the Radio Law, you may be asked
to temporarily submit the product for inspection in accordance with the
Radio Law.
• IMEI information of the product is automatically sent to KDDI CORPORATION
for maintenance and monitoring operational status of the product.
• The Company is not liable for any damages arising from earthquakes,
lightning, storms, floods or other natural disasters, as well as fires, actions
by third parties, other accidents, intentional or mistaken misoperation by the
customer, or use under other unusual conditions outside the responsibility of
the Company.
• The Company is not liable for any incidental damages (change/
disappearance of described content, loss of business income, disruption of
business, etc.) arising from use or inability to use the product.
Be sure to read these notes on usage before use
• The Company is not liable for any damages arising from failure to observe
the described content of this manual.
• The Company is not liable for any damages arising, for example, from
malfunction caused by combination with connected devices or software not
related to the Company.
June 2015, 1st Edition
Do not place near corrosive chemicals or in places where corrosive
Do not cover or wrap the product with bedding, etc. while using or
gas is generated. Doing so might cause a fault or loss of internal
charging the product. Doing so might cause fire, fault or injury.
data.
When using an AC adapter or external device, insert/remove the
Do not use if there is smoke, abnormal odor or noise, excessive
connector straight to/from the terminal. Make sure the orientation of
overheating, or other abnormalities. If an abnormality occurs,
the connector. Unless it's correct, it may cause overheating,
disconnect the specified charging equipment (sold separately)
ignition, damage, or a fault.
from the power outlet if you are charging the battery, make sure that
the product is not overheating before turning the power off, and
CAUTION Be sure to read the following cautions contact an au shop or Keitai Guarantee Service Center. Also, if you
before use. have dropped or damaged the product, do not continue to use it in
that state, and contact an au shop or Keitai Guarantee Service
Center.
Do not expose the camera lens to direct sunlight for an extended
period. Doing so might cause ignition, rupture, fire, or a fault by the
When inserting an earphone, etc. into the product, raise the volume
light-collecting mechanism of the lens.
slowly to adjust the volume to the proper level. Sound suddenly at a
loud volume when first turned on, setting too loud a volume, or
Do not store or leave the product in places subject to direct sunlight
using the earphone continuously for a long period of time might
(e.g. in automobiles), places that get hot, places that get extremely
adversely affect your ears. Also, raising the volume too high might
cold, and in humid or dusty places. Doing so might cause
prevent you from hearing sounds around you, which might in turn
overheating, ignition, deformation or a fault.
lead to a traffic accident at a railroad crossing or pedestrian
Do not leave or charge on unstable places such as rocky stands or
crossing.
tilting surfaces. Dropping the product may cause injury or damage.
Also, pay sufficient attention to impact, etc. Doing so may cause a
■ Main unit
fault or injury.
The product may become warm after use for long periods or after DANGER
Be sure to read the following hazards
being connected to an external power source. Do not touch the
before use.
product or specified charging equipment (sold separately) for long
periods. Doing so may cause low-temperature burns. Also do not
Do not puncture the product with a nail, hit with a hammer or step
cover with paper, clothing, bedding, etc. Doing so may cause fire,
on the product. Doing so might cause fire or damage.
injury, or a fault.
When charging the product, do not exceed the ratings for outlets or Be careful not to have the product bitten by your pet. It might cause
wiring equipment. Exceeding the ratings for power bars, etc. may leakage, overheating, rupture, ignition of the internal battery, fire or
cause overheating resulting in fire. injury.
- 7 -
■ au Nano IC Card 04 LE ■ Use near medical equipment and in medical institutions
CAUTION Be sure to read the following cautions WARNING Be sure to read the following warnings
before use. before use.
When using the product near an implanted pacemaker, implanted
Be careful when attaching/removing the au Nano IC Card 04 LE.
cardioverter-defibrillator or other electronic medical device, radio
Doing so might injure your hands or fingers.
waves might affect these units and devices. So, please observe the
following.
Do not damage the au Nano IC Card 04 LE (use in high
1. Those with an implanted pacemaker or implanted cardioverter-
temperatures, dispose of in fire, allow foreign objects to contact the
defibrillator should carry or use the product at least 15 cm away
metal portion, subject to shock, bend or place heavy objects on it,
expose to wetting, etc.). Doing so may cause erasure of data or a from the pacemaker or cardioverter-defibrillator.
2. Turn the product off or set "Airplane mode" when it may be
fault.
difficult to keep at least 15 cm away such as in a situation you
Do not store or leave the au Nano IC Card 04 LE where exposed to
cannot move freely, since there may be people with a cardiac
direct sunlight or high temperatures or in a dusty place. Doing so
pacemaker or implanted cardioverter-defibrillator nearby.
may cause a fault.
3. When a medical institution has laid down designated areas
where use of the product is prohibited or is not allowed to be
Store the au Nano IC Card 04 LE out of reach of small children.
brought in, abide by the instructions of that medical institution.
Failure to do so might cause injury, etc. if they accidentally swallow
4. When using electronic medical devices other than an implanted
and choke on it.
pacemaker and implanted cardioverter-defibrillator outside a
medical institution (e.g. home medical treatment), check
individually with the manufacturer of the electronic medical
device regarding the influence of radio waves.
- 14 -
• Captured image data or downloaded data may sometimes be altered or lost
due to faults, repair or other handling of the product. The Company is not
liable for any damage or lost income resulting from recovery of these data.
• It is recommended you keep a copy of important data in your PC's hard disk,
etc. Whatever the cause of fault or malfunction may be, the Company
assumes no responsibility for alteration or loss of saved information.
• Contents saved in the product, such as contacts, mails and favorites, might
be altered or lost in an accident, fault, repair or mishandling. Be sure to keep
a copy of important contents. Note that Company assumes no responsibility
for any damages or lost profits resulting from altered or lost contents.
• Note that content data (both charged or free content) saved with the product
cannot be returned to the customer when the product is replaced for repair
of a fault, for example.
• The product uses liquid crystal for its display. The display response speed
may become slow when the ambient temperature is low, which is due to the
property of liquid crystal and not a malfunction. Display response speed will
return to normal at room temperature.
• Although the display used on the product is made using high-precision
technology, some pixels (dots) might be lit or out at all times. This is not a
malfunction.
• You are recommended to store copies of individual data such as photos you
took, videos and music on your PC by sending each file as mail attachment,
etc. Note, however, that you may not be able to make copies of any
copyrighted data even by the above-mentioned means.
• Do not discard the product together with regular trash. Please cooperate in
the collection of the product when it is no longer needed to protect the
environment and effectively use resources. Old product is collected at au
shops and other places.
* "The Company" as appears in this manual refers to the following companies:
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: KYOCERA Corporation
■ Note
• Reproduction of the content of this manual in part or in whole is prohibited.
• The content of this manual is subject to change without notice.
• Every effort has been made in the preparation of this manual. Should
you notice any unclear points, omissions, etc., feel free to contact us.
- 1 - - 2 -
WARNING Be sure to read the following warnings
before use.
Turn off the product or put it in Airplane mode before boarding an
airplane. Use of terminals on board is restricted. Follow the
instructions of each airline.
Failure to do so may adversely affect on-board electronic
equipment. Prohibited acts related to terminal usage on an airplane
may be punished by law.
When using in hospitals, follow the guidelines of each institution.
Turn power off where use is prohibited.
Use may affect electronic equipment and electric medical
equipment.
Sometimes, very rarely some people demonstrate symptoms such
as temporary muscle spasms, loss of consciousness, etc. by
watching repeatedly flickering screens. Those with a past history of
this should consult with a physician beforehand.
Chemical hardened glass is used for the display of the product. In
case it is broken, do not touch the broken part. Doing so might
cause injury by the broken part. Contact an au shop or Keitai
Guarantee Service Center.
CAUTION Be sure to read the following cautions
before use.
Use of the main unit in an automobile sometimes affects on-vehicle
electronic devices, though this rarely happens. If this happens,
stop use since this may impair safe travel.
If you feel any abnormality with your skin, immediately consult a
dermatologist. Itching, rashes, eczema, etc. sometimes occurs
depending on your physical constitution and condition.
The materials of parts used on the product are as follows.
- 8 - - 9 -
Handling Precautions
Observing the following will prevent product faults and ensure adequate
product performance.
Be sure to read for proper use.
■ Precautions common to the main unit, internal battery, charging
equipment, au Nano IC Card 04 LE, peripheral devices
● Do not apply excessive force to the product during use. Be sure not to put
the product into a tightly packed bag or place a heavy object on the
product in a bag. Doing so might damage the display or internal circuit
board resulting in a malfunction.
Keeping an external device connected to the external connection terminal
or earphone microphone terminal might damage the connector resulting in
a malfunction. Such damage and malfunction are not covered by the
warranty, even if there is no external damage.
● To ensure waterproof property (equivalent to IPX5 and IPX7) of this product,
use the product with the card slot cover attached securely for use.
Note that the waterproof property is not guaranteed in every usage
condition. Do not allow water to get inside the product or splash water on
the charging equipment or optional accessories. Do not open/close the
card slot cover in the rain or with waterdrops on the surface of the product.
Doing so might cause water intrusion resulting in internal corrosion.
Malfunctions determined to be caused by water intrusion are not covered
by the warranty.
● Do not use the product in extremely hot, cold or humid places. (Use within
an ambient temperature range of 5ºC to 35ºC and humidity range of 35% to
85%.)
- Charging equipment
- Peripheral devices
● Do not use the product in extremely hot, cold or humid places. (Use within
an ambient temperature range of 5ºC to 35ºC and humidity range of 35% to
90%. Temporary use at 36ºC to 40ºC is allowed.)
- Main unit
- au Nano IC Card 04 LE (attached to the main unit)
● Do not use in places subject to lots of dust or vibration.
- 15 - - 16 -
■ Explanation of graphic symbols used in this manual
Safety Precautions (Observe Strictly)
■ Before using this product, thoroughly read these safety
Indicates an action that
precautions for proper use. After reading, store the precautions
is not allowed.
in a safe place.
● These "Safety Precautions" describe instructions that should be observed to
prevent damage to property or injury to the customer or others using the
Indicates that handling
product.
with wet hands is not
● When the product is used by a child, parents or guardians should
allowed.
thoroughly read the "Basic Manual" and teach the child how to use it.
● These instructions are divided into the following categories.
Indicates that
disassembly is not
■ Explanation of indications used in this manual
allowed.
This symbol indicates the potential and imminent
DANGER
danger of death or serious injury (*1) to a person due
■ Precautions common to the main unit, internal battery,
to mistaken handling.
charging equipment, au Nano IC Card 04 LE, peripheral
This symbol indicates the possibility of death or
WARNING
devices
(*1)
serious injury to a person due to mistaken
handling.
DANGER Be sure to read the following hazards
This symbol indicates the possibility of personal
CAUTION
before use.
minor injury (*2) to a person or physical damage (*3)
due to mistaken handling.
Be sure to use only the specified peripheral devices. Use of other
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-temperature), devices might cause overheating, ignition, rupture, fault, or leakage
electric shock, broken bones, injuries with residual aftereffects from of liquid.
poisoning, etc., and injuries requiring hospital admission for
Do not use, store or leave the product in hot places (e.g. by the fire,
treatment or long term hospital attendance as an outpatient.
near a heater, under a kotatsu, in direct sunlight, in a car in the hot
*2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric
shock, etc. that do not require hospital admission for treatment or sun). Doing so might cause ignition, rupture, fault, fire or injury.
long-term hospital attendance as an outpatient.
Do not put the product in a cooking apparatus such as microwave
*3 Physical damage: This refers to extended damage to buildings, furniture, livestock,
oven or a pressure vessel. Doing so might cause ignition, rupture,
or pets.
fault, fire or injury.
- 3 -
■ Qua tab 01 main unit
Do not place the product directly on sand at a beach, etc. Sand or
Part Material Surface treatment other small particles might get inside the microphone, speaker, etc.
causing the volume to drop. If sand gets inside the product, it might
Exterior case PC resin + GF Acrylic UV hard coating
cause overheating or a fault.
resin (white, pink), cured urethane
coating (navy)
■ Internal battery
Display Hardened glass Chemical hardening
Power button, PC resin Acrylic cured coating + acrylic
(The internal battery of this product is a lithium-ion
Exterior panel UV hard coating (white, pink),
battery)
(edge around entire metal vapor deposition + acrylic
The internal battery is not fully charged at the time of
unit) UV hard coating (navy)
purchase. Also charge after not using the product for a
Volume UP/DOWN PC resin Acrylic UV hard coating
long period.
button
Camera lens PMMA resin Chemical hardening
DANGER Be sure to read the following hazards
Camera lens ring Aluminum alloy Anodizing
before use.
Card slot cover PC + GF resin/ Acrylic UV hard coating
TPE resin (white, pink), cured urethane
If the leaked liquid gets on your skin or clothes, immediately rinse it
coating (navy)
off with water to avoid injury. If the liquid gets into your eyes, do not
rub, but after wash your eyes with water, and immediately consult a
Do not bring the product close to magnetized objects such as cash
doctor to avoid the risk of losing your eyesight. If the liquid gets on
cards, floppy disks, credit cards, and prepaid cards. Doing so
a device, wipe it off without touching it.
might result in loss of recorded information.
The internal battery is a consumable item. If the performance of the
Do not allow liquids, metal objects, burnable items, and other
internal battery does not recover (e.g. the usable time after each
foreign matter to get inside the earphone microphone terminal, the
charge has become extremely short), the battery is at the end of
external connection terminal, the microSD memory card slot or the
service life, so stop use. Failure to do so might cause overheating,
au Nano IC Card 04 LE slot. Failure to do so might cause fire,
ignition, rupture or leakage. Since the battery is built into the
electric shock, a fault, or injury.
product, we keep your product and replace the battery for a fee.
You may not use the product for a certain period. The life time of
Use the product with the card slot cover, etc. closed. If the cover is
the internal battery depends on the usage etc.
open, dirt or water may get inside causing a fault.
Be cautious with magnetic portions of product. Speaker and other
components use magnets, and may attract tacks, pins, cutter
blades, staples, or anything else metal, and cause unexpected
injury. Before using, always check that there are no foreign objects
on the speaker or other components.
- 10 -
● Clean the external connection terminal and earphone microphone terminal ● Never use modified au terminals. Use of a modified device violates the
with dry cotton swabs, etc. every now and then. Soiled terminals might Radio Law.
cause poor connection. Do not exert a strong force to clean either terminal This product has acquired the certification of conformity with technical
to prevent deformation. regulations for the specified radio station based on the Radio Law, and the
● Clean with a dry, soft cloth (cloth for cleaning glasses, etc.). Rubbing
"Technical Conformity Mark
forcefully with a dry cloth may scratch the display. Water or other soiling on certificate.
Home screen → [Settings] → [About tablet] → [Compliance information]
display can stain the display if left uncleaned. Using organic solvents such
as alcohol, thinner, benzine, etc. may erase exterior print or fade color. If the product is disassembled and modifications are made to the internal
● Use as far away as possible from land-line phones, TVs and radios. Use
components, the certification of conformity with technical regulations will
nearby might affect them. become invalid. Do not use the product with the certification invalid, as it is
● The product may become warm while charging or during other operations,
a violation of the Radio Law.
● Take care not to place magnetized items such as magnetic cards, speakers
depending on the situation, but this is not abnormal.
● Do not put stickers on the product. Sound may not be emitted. and TV sets near the product, as it might cause malfunction. Putting a
strong magnetism close to the product might cause false operation.
■ Main unit
● When you put the product in your bag, etc., take care so that the display
● Do not forcefully press, tap or intentionally subject the display to strong
does not come in contact with metal objects or other hard objects. Doing
impact. Doing so might cause scratching or damage.
so might cause scratching or damage.
● Do not forcefully press your fingernails, sharp objects or hard objects
● When suddenly brought into a warm place from a cold place, or when in a
against buttons or display surface. Doing so might cause scratching or
humid location, or when used where temperature suddenly changes (e.g.
damage.
near the air discharge port of an air conditioner), water droplets (i.e.
The touch panel is designed to be lightly touched by fingers. Do not apply
condensation) sometimes are formed inside the product. Note that when
strong pressure with your fingers or sharp-pointed objects (such as
used under conditions such as this, the humidity might cause corrosion or
fingernails, ballpoint pens and pins) on the touch panel.
a fault.
Touching the panel may not work in the following cases. Note that it may ● When wiping the display, wipe with a soft, dry cloth. Use of a moistened
cause malfunction.
cloth, glass cleaner or other similar liquid might cause a fault.
• Operation with fingernails
● When connecting/disconnecting the external device to/from the external
• Operation with foreign object on the screen
connection terminal or the earphone microphone terminal, make sure that
• Operation with protective sheet or seal on the screen
the connector or plug of external device is straight with the external
• Operation with a water drops or dew condensation attached on the touch
connection terminal.
panel ● Note that applying unnecessary force with the external connection terminal
• Operation under water
or the earphone microphone terminal connected to the external device
● Do not remove the sticker appearing after opening the card slot cover and
might cause damage.
imprinted with the IMEI. ● Do not exert excessive force when attaching/removing a microSD memory
card. Doing so might injure your hands or fingers.
● While writing/reading data to/from a microSD memory card, do not subject
the product to vibration or impact, or turn off the power. Doing so might
cause loss of data or malfunction.
- 17 -
Do not throw the product into a fire or heat it. Doing so might cause
Indicates that use in a ignition, rupture or fire.
place where the product
The customer is not allowed to disassemble, modify or repair the
is likely to get wet or
product. Doing so might cause a fault, ignition, electric shock, or
allowing the product to
injury. The Company is not liable even in the event of any
get wet is not allowed.
nonconformities arising on the product or peripheral devices as a
result of modification, etc. Modification of the product is in violation
Indicates an action that
of the Wireless Telegraphy Act.
must be done.
The product's battery is built in, and cannot be replaced by the
Indicates that the power
customer. For battery replacement, contact an au shop or Customer
plug must be
Service Center.
disconnected from the
power outlet.
WARNING Be sure to read the following warnings
before use.
Before entering an area where flammable gas is generated such as
a gas station, always be sure to turn off the product, and
discontinue charging the product if charging. Failure to observe
these precautions might cause the gas to catch fire.
When using a metal accessory etc., make sure not to allow the
metal part come in contact with the connection terminal, earphone
microphone terminal or power outlet. Doing so might cause electric
shock, ignition, injury or a fault.
Do not drop or subject to strong impact, such as throwing. Doing
so might cause rupture, overheating, ignition, or a fault.
Do not use outside when you can hear thunder. Doing so might risk
lightning strikes and electric shock.
- 4 - - 5 -
■ Charging equipment
WARNING
Be sure to read the following warnings
before use.
Do not use at other voltages than the specified power supply
voltage. Doing so might cause ignition, fire, overheating, or electric
shock.
• AC adapter (sold separately): 100 VAC to 240 VAC
Insert the power plug on the specified charging equipment (sold
separately) all the way into the outlet. Not being plugged in all the
way may cause electric shock, overheating, ignition, fire, or injury.
Do not use if the specified charging equipment (sold separately) is
damaged or the outlet receptacle is loose.
Do not damage, rework, twist, pull, or place heavy objects on the
cable of the specified charging equipment (sold separately). Do
not use a damaged cable. Doing so may cause electric shock,
short-circuiting, fire, or injury.
Do not touch the specified charging equipment (sold separately) if
thunder is audible. Doing so may cause electric shock due to
lightning.
Before cleaning, unplug the specified charging equipment (sold
separately) from its outlet. Cleaning while plugged in may cause
electric shock or short-circuiting.
Wipe off dust on the power plug. Failure to do so might cause fire,
burns or electric shock.
When the specified charging equipment (sold separately) is not to
be used for a long time, disconnect the power plug from the power
outlet. Doing so might cause fire or a fault.
- 11 - - 12 -
● Do not cover the sensor with your finger or put a sticker on it. Doing so may
hinder the sensor for detecting the ambient light level and functioning
correctly.
■ Touch panel
" is checkable on au terminals as a
● Use your finger to operate the touch panel. Do not use ballpoint pens,
pencils or other sharp-pointed objects. Using such objects does not only
hinder correct operation of the touch panel, but also might cause
scratching or damage to the display.
● Adhering stickers and protectors (commercially-available protective films,
privacy protectors, etc.) on the display may prevent the touch panel from
operating correctly.
● If the display surface is dirty, it may not function correctly. In such case,
wipe the display surface with a dry, soft cloth.
● When carrying the product in your bag, etc., take care not to put the touch
panel close to metals or other conductive materials, as it might cause false
operation of the touch panel.
■ Internal battery
● Use in very hot or cold environments, for example, when left in an
automobile with the windows closed in summer, will cause the internal
battery capacity to drop and shorten the available battery usage time. This
will also shorten the internal battery's service life. Try to use the product as
far as possible at room temperature.
● After the internal battery is charged, battery power decreases bit by bit
even if the product is not used. The internal battery may be discharged if
the product is not used for a long time. We recommend to charge the
product before use.
■ au Nano IC Card 04 LE
● Do not forcibly remove or insert the au Nano IC Card 04 LE. Be careful not
to exert excessive force when inserting the card into your au terminal.
● You are responsible for any malfunction caused by inserting your au Nano
IC Card 04 LE into another IC card reader, etc.
● Keep the IC (metal) part of your au Nano IC Card 04 LE clean. Wipe the
card with a dry, soft cloth (such as for cleaning eyeglasses) for cleaning.
● Do not put stickers, etc. on the au Nano IC Card 04 LE.
- 18 - - 19 -
To avoid short-circuiting the connection terminal or earphone
microphone terminal, do not allow fingers or other part of your body
or conductive foreign objects (metal fragments, pencil leads, etc.)
to come into contact with or get inside the connection terminal or
earphone microphone terminal. Doing so might cause overheating,
fire, a fault, electric shock, or burns.
If the product is damaged because it is dropped or something, and
its display is cracked or internal parts are exposed, do not touch
the cracked display or exposed parts with your hands. Doing so
might cause electric shock or injury from damaged parts.
If the wet product is charged, electric shock, short circuit, or
corrosion may occur and overheating may cause fire, malfunction
or burns.
Although this product model has waterproof property, stop use if
liquid such as water gets inside the product from the card slot
cover, etc., and contact an au shop or Keitai Guarantee Service
Center. Continued use of the product in this state might cause
overheating, ignition, fire, electric shock, or a fault.
Do not use while driving a car or riding a motorbike or bicycle or
while walking. It might cause a traffic accident or cause someone
to fall. Use while driving a car or motorbike is prohibited by law.
Use while riding a bicycle may be punishable by some regulations.
If charging is not completed after the specified charging time, stop
charging. Failure to do so might cause leakage of liquid,
overheating, rupture or ignition.
Do not leave in places within the reach of small children. Small
children might swallow small parts, etc. by mistake and choke on
them, or might drop them by mistake and cause accidents or injury.
- 6 -
Do not use in places subject to direct splashing with water, pet
urine or other liquids. Doing so might result in faults resulting from
overheating, fire, electric shock, short-circuiting of electronic
circuits, or injury. In the event that the product is splashed with
liquid, immediately disconnect power plug of the specified
charging equipment (sold separately).
Do not leave specified charging equipment (sold separately)
plugged in if not in use. Do not wrap cord of specified charging
equipment (sold separately) around adapter body. Doing so may
cause electric shock, overheating, fire, a fault, or injury.
Do not forcibly bend the charging equipment's plug or the
connection between the connector and power cord. Doing so might
cause electric shock, overheating, fire, fault or injury.
CAUTION Be sure to read the following cautions
before use.
Do not use in humid places such as bath areas, or connect/
disconnect the specified charging equipment (sold separately) with
wet hands. Doing so might cause electric shock, a fault or injury.
When unplugging the specified charging equipment (sold
separately) from its outlet, hold by the plug. Pulling by the cable
may damage the cable.
- 13 -
■ Camera
● When using the camera, follow common rules of etiquette regarding camera
use.
● When photographing important occasions (such as a wedding), take a trial
shot and check the shot image to make sure it is correctly shot.
● Do not use the camera for recording commercially available books or
information of which photographing is not allowed.
● Performance may not be obtainable in low-temperature conditions,
including the camera not activating.
■ Copyrights and rights of portrait
● You are not allowed to copy, distribute, publish, modify or edit the data you
shot, recorded or downloaded using this product without the consent of the
copyright holder, except for personal use, under the copyright law.
In addition, do not use or modify portraits or names of other individuals
without their consent, as it might infringe on rights of portrait.
Note that shooting and recording may be restricted at some live
performances, shows and exhibitions even for personal use.
● Be careful about the copyright and portrait right when posting photos you
shot, etc. on Internet homepages.
■ Backup content on the product
● Please back up important content registered to the product or downloaded
for the product from an outside source. Content recorded to memory on the
product sometimes disappears or is altered by unexpected factors, such
as static electricity or a fault, repair, mishandling, etc.
- 20 -