Releasing Snapshot Pairs Using Cli; Changing Pair Information Using Cli - Hitachi AMS2100 User Manual

•
% aureplicationlocal –unit array-name –ss –refer
Pair name
Copy Type
SS_LU0200_LU1001
SnapShot
%
% aureplicationlocal –unit array-name –ss –restore –pvol 200
–svol 1001
Are you sure you want to restore pair?
(y/n[n]): y
The pair has been restored successfully.
%
3. Execute aureplicationlocal to restore the pair. Refer to the following
example.
•
% aureplicationlocal –unit array-name –ss –refer
Pair name
Copy Type
SS_LU0200_LU1001
SnapShot
%
V-VOL to P-VOL is restored.

Releasing SnapShot pairs using CLI

To release the SnapShot pair and change the status to Simplex using CLI:
1. From the command prompt, register the array to which you want to
release the SnapShot pair, then connect to the array.
2. Execute the aureplicationlocal command release the pair. Refer to
the following example.
•
% aureplicationlocal –unit array-name –ss –simplex –pvol 200
–svol 1001
Are you sure you want to release pair?
(y/n[n]): y
The pair has been released successfully.
%
3. Execute aureplicationlocal to release the pair. Refer to the following
example.
•
% aureplicationlocal –unit array-name –ss –refer
DMEC002015: No information is displayed.
%
The SnapShot pair is released.

Changing pair information using CLI

You can change the pair name, group name, and/or copy pace using CLI.
Hitachi AMS 2000 Family Copy-on-Write SnapShot User Guide
LUN Pair LUN Status
Group
200 1001
---:Ungrouped
LUN Pair LUN Status
Group
200 1001
---:Ungrouped
Operations using CLI
Split(100%)
Paired( 40%)
B–17