Address Space - Siemens SIMATIC S7-1500 Manual

Parameters/address space

4.4 Address space

4.4 Address space
The module can be configured in various ways in STEP 7. Depending on the configuration,
additional/different addresses are assigned in the process image of the inputs.
Configuration options of AI 4xU/I/RTD/TC ST
You can configure the module with STEP 7 (TIA Portal) or with a GSD file.
When you configure the module by means of the GSD file, the configurations are available
under different abbreviations/module names.
The following configurations are possible:
Table 4- 4 Configuration options
Configuration
1 x 4-channel without value status
1 x 4-channel with value status
4 x 1-channel without value status
4 x 1-channel with value status
1 x 4-channel with value status for module-
internal shared input with up to 4 submod-
ules
Value status (Quality Information, QI)
The value status is always activated for the following module names:
● AI 4xU/I/RTD/TC ST QI
● AI 4xU/I/RTD/TC ST S QI
● AI 4xU/I/RTD/TC ST MSI
An additional bit is assigned to each channel for the value status. The value status bit
indicates if the read in digital value is valid. (0 = value is incorrect).
32
Short designation/module
name in the GSD file
AI 4xU/I/RTD/TC ST
AI 4xU/I/RTD/TC ST QI
AI 4xU/I/RTD/TC ST S
AI 4xU/I/RTD/TC ST S QI
AI 4xU/I/RTD/TC ST MSI
Analog Input Module AI 4xU/I/RTD/TC ST (6ES7531-7QD00-0AB0)
Configuration software, e.g., with STEP 7
(TIA Portal)
Integrated in hardware GSD file in STEP 7
catalog (TIA Portal) V12 or
STEP 7 (TIA Portal)
V5.5 SP3 or higher
V13 or higher with
HSP 0102
V13 or higher with
HSP 0102
V13 Update 3 or
higher
(PROFINET IO only)
V13 Update 3 or
higher
(PROFINET IO only)
V13 Update 3 or
higher
(PROFINET IO only)
Manual, 09/2016, A5E32366209-AC
higher or STEP 7
X
X
X
(PROFINET IO
only)
X
(PROFINET IO
only)
X
(PROFINET IO
only)