Inserting/removing the battery
♦
Push battery compartment cover lock (OPEN)
♦
Remove the battery compartment cover
or similar.
♦
With the help of the tab, insert one of the supplied batteries
This is only possible in one position (see figure 02). If you are exchanging the battery, remove
the inserted battery using the tab before inserting the new battery.
♦
Push the battery
CAUTION
►
Check the rubber seals on the battery compartment
every time before using the camera underwater. Do not immerse the camera in water if the
rubber seals are damaged.
♦
Replace the battery compartment cover
until it audibly clicks into place (see figure 03). If the battery compartment cover lock (OPEN)
then automatically moves up, the battery compartment is properly closed (see figure 03).
This is essential for when the camera comes into contact with water.
Fig. 01
SWK 360 A1
downwards so that it clicks correctly into place.
Fig. 02
downwards (see figure 01).
from the battery compartment. Use your fingernail
into the battery compartment.
for visible damage. Check these
in the battery compartment and push it downwards
Fig. 03
GB│IE│NI
13
│
■