ETP4830-A1 Embedded Power
User Manual
Figure 4-5 Installing a dry contact signal cable
(1) Contact plate
----End
4.3.3 Connecting the Communications Cable
Connecting a Communications Cable to the SMU01A
Connect a communications cable to the COM port on the SMU01A when you use the Web UI,
NetEco, or SNMP to remotely manage the power supply system, as shown in
Figure 4-6 Connecting a communications cable to the SMU01A COM port
(1) COM port
Connecting a Communications Cable to the SMU01B
Connect the COM port on the SMU01B to the corresponding serial port on the Huawei access
network communications equipment using a communications cable when you use the U2000
network management system to remotely manage the power supply system, as shown in
Figure
Issue 10 (2017-08-08)
4-7.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Dry contact port
(2) Remote management
4 Installation
Figure
4-6.
25