Directory Of Configuration Dbs - Siemens SIMATIC S5 Manual

Configuring with COM 115F
F1 Display block directory
Press the F1 key to call the "DIRECTORY OF CONFIGURATION DBs" menu ( Figure 1-15).

Directory of Configuration DBs

F1 PLC
F2 FD
F3 EPROM
F4 PR PLC
F5 PR FD
F6 PR EPR
F7
F8 RETURN
F1
PLC
The directory of the available configuration DBs can be output from the PLC, FD or EPROM.
The output can be terminated with the <Break> key. The question "CONTINUE?" will then
appear. If you acknowledge with the <Exec> key, output will continue.
The question "CONTINUE?" will also appear at the end of the output. If you acknowledge
with the <Exec> key, the directory menu will appear again.
The directories of the PLC, FD and EPROM can be printed out for documentation purposes
using softkeys F4, F5 and F6.
1-24
PROGRAM FILE: A:@@@@@@ST.S5D
: Display PLC directory on screen
: Display FD directory on screen
: Display EPROM directory on screen
: Print PLC directory
: Print FD directory
: Print EPROM directory
:
: Return to previous menu
F2 F3 F4
FD EPROM PR PLC
Figure 1-15. Directory of Configuration DBs
COM 115F / PDC15
F5 F6 F7
PR FD PR EPR
S5-115F Manual
F8
RETURN
EWA 4NEB 811 6149-02