10 INSTALLATION INSTALLATION Installation Overview Please read the following installation instructions first after purchasing this product or transporting it to another location. Check and choose the Install anti-tip device Level the range proper location 240 V Plug in the power cord Engage the anti-tip device Test run Product Specifications...
Page 3
INSTALLATION Before Installing the Range If you did not receive an anti-tip bracket with your purchase, call 1-800-243-0000 (1-888-542-2623 in CANADA) to receive one at no cost. WARNING WARNING Tip - Over Hazard • The information in this manual should be A child or adult can tip the range and followed exactly.
12 INSTALLATION Installing the Range Choosing the Proper Location CAUTION Unpacking and Moving the Range • Avoid placing cabinets above the range. To CAUTION minimize the hazard caused by reaching over the open flames of operating burners, install a • You should use two or more people to move ventilation hood over the range that projects and install the range.
INSTALLATION Dimensions and Clearances NOTE Save for the use of the local electrical inspector. 24" 3" (7.6 cm) (60.9 cm) 3" (7.6 cm) 25" Normal counter (63.5 cm) Acceptable top depth electrical outlet area Counter 36" top height (91.4 cm) Cabinet opening 24"...
14 INSTALLATION Installing the Anti-tip Device Use a level to check your adjustments. Place the level diagonally on the oven rack, and check each direction WARNING for level. First check direction . Tip - Over Hazard Then check direction . If the level doesn’t show level A child or adult can tip the range and on the rack, adjust the leveling legs with a wrench.
INSTALLATION Engaging the Anti-tip Device Test Run • Move the range close enough to the opening to Check if the range is properly installed and run a test plug into the receptacle. cycle. • Slide the range into position ensuring that the back Press Clear/Off to start test.