Advertisement
Night Override
1.
Remove passkey (if present) from MMI port.
2.
To select day operation: Press
Viewing Point Descriptions
1.
Insert passkey in MMI port.
2.
To select points: Press
3.
To exit: Remove the passkey.
Viewing/Commanding Point Values
1.
Insert passkey in MMI port.
2.
To select a point: Press
3.
To view a point's value: Press
4.
To view point command cursor: Press
5.
To select a character: Press
6.
To change a character: Press
7.
To cancel changes: Remove the passkey.
8.
To save changes: Press
9.
To return to View Pt. Descript: Press
10. To exit: Remove passkey.
Releasing Points from Override and/or
Resetting to Factory Default Values
1.
Insert passkey in MMI port.
2.
To select a point: Press
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models
as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2015 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
USA
+ 1 847-215-1000
.
or
.
or
.
.
or
.
.
or
.
.
.
or
.
Your feedback is important to us. If you have
comments about this document, please send them
to
SBT_technical.editor.us.sbt@siemens.com
3. To view a point's value: Press
4. To view the point command cursor: Press
5. Press
until * or override symbol (#) is selected.
6. To release the point: Press
7. To cancel changes: Remove the passkey.
8. To confirm release: Press
9. To exit: Remove the passkey.
Setting Display Options
NOTE: Point 00 (SETUP) exist only in the sensor.
1. Insert passkey in MMI port.
2. Press
or
, scroll to Point 00, and press
a. TEMP (temperature)
To display TEMP (YES/NO): Press
b. CRPT (critical point)
• To go to CRPT command line: Press
• To select a point number: Press
• To turnoff CRPT display: Select Point 00.
c. UNITS
•
Press
•
To select English/Metric: Press
3. To exit and save changes: Press
4. Remove the passkey.
Document No. 129-363
Quick Reference Guide
May 13, 2015
.
or
.
.
or
or
and view the UNITS screen.
or
.
Document No. 129-363
Printed in the USA
Page 3 of 3
or
.
.
.
.
.
.
Advertisement
