Panasonic 1M Operation Manuals page 83

For apartment building ha d series windea
Table of Contents

Advertisement

If a Door Is Opened While the Security Alarm Is Active
If a door is opened while the security alarm is
active, the magnet switch is turned on and the
security indication (security preliminary alarm)
is displayed on the base unit.
The Security Indicator
flashes in green while the
security alarm is active.
Approximately 100 seconds (factory default
Note
setting) after the magnet switch is activated,
the event is reported to the manager room
and the handset of the door phone. If it was
an erroneous report, disarm the security
alarm within 100 seconds. When the security
alarm is disarmed, all the indicator lamps and
display are turned off. For information on how
to disarm it, refer to pages 102 to 103.
How to stop the call message
Press the Alarm Stop button.
Installer
Setting
●It is also possible to disable the call
message voice played while the security
preliminary alarm is active.
(only a beep sound is played.)
●You can choose the security alarm delay
time and the security preliminary alarm time
from 60, 120, 300 or 0 (immediately)
seconds
The factory default settings of Security 2 are
as follows:
Security alarm delay time: 60 seconds
Security preliminary alarm time: 60 seconds
●It is also possible to report to the manager
room and handset of the door phone
immediately.
●It is also possible not to report to the
manager room.
●You can also change the screen displayed
while the security alarm is active.
Consult with the company that installed the
system or the administrating company.
(beep) Security is operating.
(security preliminary alarm)
電源
Fire
Gas
Not Home
警戒
Lock
FIRE
GAS
NOTHOME
SET
POWER
After about 60 seconds
(alarm sound) Security alarm has
activated. (security alarm)
After the security preliminary alarm
has sounded for 60 seconds, it
switches to the security alarm. The
behavior after switching to the
security alarm is the same as
Security 1 (
page 82).
Alarm Stop
非常
EMERG.
button
復旧/警報音停止
RESET/STOP ALARM
火災
確認
Security 2
FIRE CONFIRM
indication
メニュー
flashing in
MENU
yellow
終了
OFF
OPEN
解錠
UNLOCK
The security
alarm indicator
通話
TALK
lamp flashing
in green
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vgdb18112wVgdt18112wVgdt18512wVgdb18512w

Table of Contents