Table of Contents
Advertisement
1-2 Pick-up disassembly and ressembly
1-2-1
Disassembly
1) Remove the power cable.
2) Switch LD SW3 on deck PCB to ÔSÕ before remov-
ing the FPC ( inserted into Main PCB CN1.
See Fig 1-2.)
3) Disassemble the deck.
4) Disassemble the deck PCB.
5) Replace the Pick-up.
Note : If the assembly and disassembly are not done in correct sequence, the Pick-up may be damaged.
Samsung Electronics
O
S
LD
SW3
FPC
Fig. 1-2
1-2-2 Assembly
1) Replace the Pick-up.
2) Assemble the deck PCB.
3) Reassemble the deck.
4)
Switch LD SW3 on deck PCB to ÔOÕ and insert
FPC into Main PCB CN1 (See Fig 1-2).
Precautions
1-3
Advertisement
Table of Contents
