Tagging; Hot Line Tag - ABB COM600 Series Operator's Manual

Versatile substation automation and data management unit

Hide thumbs Also See for COM600 Series:

Table of Contents

3.6.5.

3.6.5.1.

COM600 series 5.1

Operator's Manual

Figure 3.6.4-1 Operator place

Tagging

Hot Line Tag is used to inform that the device is currently being worked on by a techni-

cian. By applying a Hot Line Tag to a switching device (for example, Circuit breaker),

the device is blocked from open and close control from remote or local WebHMI. If Hot

Line Tag is applied to Tap changer, raising and lowering, and operation modes are dis-

abled.

To apply Hot Line Tag:

1. Open Switch Device Control Dialog by clicking the object on the single line dia-

gram.

2. Select the Hot Line Tag tab.

3. Enter a short caption into the Caption text box.

4. Enter a description of the Hot Line Tag.

1MRS756705

operator_place.png

Table of Contents