Advertisement
INTELLIGENT SERVER
• Do not install in the following locations.
• Do not operate the touch panel with mechanical pencils or other pointed objects.
• In installation work, use wiring with the correct ampacity.
• Use specified cables and connect them securely, and do not subject connecting terminals
• Always install a circuit breaker on the primary side of the power supply.
• Always turn off the power before inserting or removing a compact flash card.
• Clean the touch panel by wiping with an eyeglasses cleaner or other soft cloth.
Trademarks
• BACnet is a registered trademark of ASHRAE (American Society of Heating, Refrigerating and
• Compact Flash and CF are trademarks of SanDisk Corporation.
• Ethernet is a registered trademark of Xerox Corporation.
3-EN
Locations where combustible gas may leak
Locations with high humidity or water
Dusty locations
Locations in direct sunlight and locations subject to high temperatures
Locations within 1 m from televisions or radios
Outdoors, under awnings, or other locations exposed to rain and dew
Locations exposed to outside air containing corrosive gases or salinity
Locations with frequent vibrations
Failure to do so may result in excessive heat or fire.
to external force.
Doing so may result in broken cables, excessive heat or fire.
Failure to do so may result in damage to data and files.
To remove oil-based ink, wipe with a cloth that has been moistened with a neutral
detergent and then wrung out, and finish by wiping with a soft, dry cloth.
Do not use commercial OA cleaners, cleansers, or other liquid cleaners containing
abrasives.
Air-Conditioning Engineers, Inc.).
Caution
– 3 –
Installation Manual
Advertisement
