Huawei OptiX OSN 550 Configuration Manual page 94

3 Configuring SDH Services
Parameter
Direction
Source Slot
Source VC4
Source
Timeslot
Range(e.g.
1,3-6)
Sink Slot
Sink VC4
Sink Timeslot
Range(e.g.
1,3-6)
Activate
Immediately
Step 3 Configure pass-through services on NE2.
1.
2.
3-12
Value in
This
Example
Bidirectional
3-SP3D
-
1-5
1-SL1D-2
(SDH-2)
VC4-1
1-5
Yes
Select NE2 in the NE Explorer, and then choose Configuration > SDH Service
Configuration from the Function Tree.
Click Create on the lower-right pane to display the Create SDH Service dialog box. Set
the parameters that are required, and then click OK.
Parameter Value in
This
Example
Level VC12
Direction Bidirectiona
l
Source Slot 1-SL1D-2
(SDH-2)
Source VC4 VC4-1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Description
In this example, the services are transmitted and received
over the same path. That is, the services are Bidirectional
services.
In this example, the SP3D board in slot 3 of NE3 is
configured as the source tributary board. See
-
In this example, five E1 services are configured between
NE1 and NE3. Hence, the service source occupies VC-12s
1-5.
In this example, the SL1D board in slot 1 of NE2 is
configured as the sink line board. See
The service sink uses the timeslots of VC4-1.
In this example, five E1 services are configured between
NE1 and NE3. Hence, the service sink occupies VC-12s
1-5.
-
Description
In this example, E1 services are configured. Hence,
Level of the E1 services is set to VC12.
In this example, the services are transmitted and received
over the same path. That is, the services are
Bidirectional services.
In this example, the SL1D board in slot 1 of NE2 is
configured as the source line board. See
The timeslots where the service source is located belong
to the first VC-4 (VC4-1).
System
Configuration Guide
Figure 3-4.
Figure 3-4.
Figure 3-4.
Issue 02 (2011-06-30)