Canon Inner Booklet Trimmer-A1 Service Manual page 60

5
Installation > Installation Procedure > Installing the Trimmer Unit
5
5) Using the two supplied screws (bind-head, M4 x 6), secure the trimmer unit frame to the accride rail.
MEMO:
Hold the cutter unit as shown below.
F-5-19 F-5-19
5 Installation > Installation Procedure > Installing the Trimmer Unit
x2
F-5-18 F-5-18
6
6) Place the cutter unit on the trimmer unit frame.
MEMO:
Align the hole at the back of the cutter unit with the pin at the back of the trimmer unit frame.
F-5-20 F-5-20
5-7
5-7