3.3 Startup and Operation of Recorder without Display
3.3.1 Overview
Introduction
This subsection provides procedures and reference information for operating the recorder models that do
not have a display. It assumes that the recorder has been properly mounted and wired in accordance with the
instructions in Section 2, and prepared as described earlier in this section.
SET THE SWITCHES DESCRIBED IN THIS SECTION WITH THE UNIT
POWER DISCONNECTED. DO NOT TOUCH POWER CONNECTIONS
AT TB1. FAILURE TO OBSERVE THIS PRECAUTION CAN RESULT IN
EXPOSURE TO A POTENTIALLY LETHAL SHOCK HAZARD. MORE THAN
ONE SWITCH MAY BE REQUIRED TO DE-ENERGIZE UNIT.
4/00
WARNING—SHOCK HAZARD
DR4300 Circular Chart Recorder Product Manual
Configuration, Startup, and Operation
of Recorder without Display
!
65