Page 1 Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each adjustment before driving, etc.
Page 2: Table Of Contents
TABLE OF CONTENTS For your information....... 8 Operation of Reading this manual ....12 each component How to search......13 Pictorial index ......14 3-1. Key information Keys........104 For safety and security 3-2. Opening, closing and locking the doors Doors .........
Page 3 4-5. Using the driving support Driving systems Toyota Safety Sense P..228 4-1. Before driving (Pre-Collision System)..235 Driving the vehicle..... 160 Cargo and luggage.... 170 (Lane Departure Alert)..249 Vehicle load limits ..... 174 Dynamic radar Trailer towing..... 175 cruise control ....
Page 4 TABLE OF CONTENTS ® 5-7. Connecting Bluetooth Multimedia Preparations to use wireless communication ....371 5-1. Basic Operations ® Registering a Bluetooth Audio system types ... 336 audio player Audio system..... 338 for the first time....377 Steering wheel audio ®...
Page 5 Interior features Maintenance and care 6-1. Using the air conditioning 7-1. Maintenance and care system Cleaning and protecting Manual air conditioning the vehicle exterior ..490 system......426 Cleaning and protecting Automatic air conditioning the vehicle interior ... 494 system......432 7-2.
Page 6 TABLE OF CONTENTS 8-2. Steps to take in an Vehicle specifications emergency If your vehicle needs to be towed ......559 9-1. Specifications If you think something is Maintenance data wrong ......564 (fuel, oil level, etc.) ..622 Fuel pump shut off Fuel information....
Page 8: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 9 SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of a mobile two-way radio system. Vehicle data recordings Your Toyota is equipped with several sophisticated computers that will record certain data, such as: •...
Page 10: Event Data Recorder
EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •...
Page 11 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 12: Reading This Manual
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. Indicates operating or working procedures. Follow the steps 1 2 3 in numerical order.
Page 13: How To Search
How to search Searching by name ■ • Alphabetical index ..P. 682 Searching installation ■ position • Pictorial index....P. 14 Searching by symptom or ■ sound • What to do if... (Troubleshooting) ..P. 678 Searching by title ■ • Table of contents .....P. 2...
Page 14: Pictorial Index
Pictorial index Pictorial index ■ Exterior 15 17 18 STYPIBD001 The illustration represents the Double Cab models and may differ from the body shape of other models. Doors ......... . . P. 111 Locking/unlocking .
Page 15 Pictorial index Fuel filler door ........P. 224 Refueling method.
Page 16: Instrument Panel
Pictorial index ■ Instrument panel Engine switch....... . . P. 193, 196 Starting the engine/changing the positions .
Page 17 Pictorial index Parking brake ........P. 210 Applying/releasing .
Page 18 Pictorial index ■ Switches Cargo lamp main switch ......P. 443 Power outlet main switch .
Page 19 Pictorial index Type A Type B Type C Emergency flasher switch ......P. 556 Front-wheel drive control switch .
Page 20 Pictorial index Audio remote control switches ..... P. 340 Talk switch ........P. 420 Telephone switches .
Page 21 Pictorial index ■ Interior SRS airbags ........P. 34 Floor mats .
Page 22 Pictorial index Inside rear view mirror ......P. 142 Sun visors ........P. 462 Vanity mirrors .
Page 23 For safety and security 1-1. For safe use Before driving...... 24 For safe driving ....26 Seat belts ......28 SRS airbags......34 Front passenger occupant classification system ..45 Safety information for children ......50 Child restraint systems..51 Installing child restraints..
Page 24: 1-1. For Safe Use
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
Page 25 When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
Page 26: For Safe Driving
1-1. For safe use For safe driving For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer.
Page 27 1-1. For safe use WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not adjust the position of the driver’s seat while driving. Doing so could cause the driver to lose control of the vehicle. ●...
Page 28: Seat Belts
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
Page 29 1-1. For safe use Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
Page 30 ■ Seat belt extender If your seat belts cannot be fastened securely because they are not long enough, a personalized seat belt extender is available from your Toyota dealer free of charge.
Page 31 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 32 ● Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 33 1-1. For safe use WARNING ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. ● Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.
Page 34: Srs Airbags
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury.
Page 35 1-1. For safe use ◆ SRS front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and front passen- ger from impact with interior components SRS knee airbags Can help provide driver and front passenger protection ◆...
Page 36 1-1. For safe use SRS airbag system components Driver airbag Seat belt pretensioners Knee airbags Driver’s seat position sensor “AIR BAG ON” and “AIR BAG Side impact sensors (rear) OFF” indicator lights Side impact sensors (front) Front passenger airbag Driver’s seat belt buckle...
Page 37 1-1. For safe use WARNING ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly.
Page 38 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 39 1-1. For safe use WARNING ■ SRS airbag precautions ● Do not allow anyone to kneel on the passenger seats toward the door or put their head or hands outside the vehicle. ● Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad and lower portion of the instrument panel.
Page 40 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 41 1-1. For safe use ■ If the SRS airbags deploy (inflate) ● Slight abrasions, burns, bruising, etc., may be sustained from SRS airbags, due to the extremely high speed deployment (inflation) by hot gases. ● A loud noise and white powder will be emitted. ●...
Page 42 1-1. For safe use ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags and SRS side and curtain shield airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
Page 43 1-1. For safe use ■ Types of collisions that may not deploy the SRS airbags (SRS side and curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
Page 44 1-1. For safe use ■ When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●...
Page 45: Front Passenger Occupant Classification System
1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classi- fication system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger. Seat belt reminder light SRS warning light “AIR BAG OFF”...
Page 46 1-1. For safe use Condition and operation in the front passenger occupant classi- fication system Adult ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG ON” indicator lights Indicator/ SRS warning light warning light Front passenger’s seat belt reminder light flashing Front passenger airbag Front passenger knee airbag...
Page 47 1-1. For safe use Unoccupied ■ “AIR BAG ON” and “AIR BAG OFF” Not illuminated indicator lights Indicator/ SRS warning light warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Front passenger knee airbag Side airbag on the front passenger seat Devices Activated Curtain shield airbag...
Page 48 1-1. For safe use : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture. : In the event the front passenger is wearing a seat belt.
Page 49 SRS warning light may come on to indicate a malfunction of the front passenger occupant classification system. In this case, contact your Toyota dealer immediately. ● Vehicles with rear seats: Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 50: Safety Information For Children
1-1. For safe use Safety information for children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt.
Page 51: Child Restraint Systems
1-1. For safe use Child restraint systems A child restraint system for a small child or baby must itself be properly restrained on the seat with the lap portion of the lap/ shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 52 1-1. For safe use Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child: Rear facing ⎯ Infant seat/con- Forward facing ⎯ Convertible   vertible seat seat Booster seat ...
Page 53 In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior. ● Vehicles without rear seats: Toyota strongly urges the use of a proper child restraint system that conforms to the size of the child. ●...
Page 54 1-1. For safe use WARNING ■ Child restraint precautions ● Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri- ous injury to the child or other passengers in the event of an accident.
Page 55: Installing Child Restraints
1-1. For safe use Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Children) system.
Page 56 1-1. For safe use Using the seat belts (→P. 60) Seat belts equipped with a child restraint locking mechanism (ALR/ELR belts except driver’s seat belt) (→P. 30) Using the top tether strap (→P. 63, 65) Access Cab models (vehicles without rear seats) ...
Page 57 1-1. For safe use Access Cab models (vehicles with rear seats)  Anchor bracket (for top tether strap) Anchor bracket is provided for each rear seat. Double Cab models  Anchor bracket (for top tether strap) Anchor bracket is provided for each rear seat.
Page 58 1-1. For safe use Installation with LATCH system (Access Cab models [vehicles with rear seats]) Type A  Latch the hooks of the lower straps onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
Page 59 1-1. For safe use Installation with LATCH system (Double Cab models) Type A  Widen the gap between the seat cushion and seatback slightly. Latch the hooks of the lower straps onto LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
Page 60 1-1. For safe use Installing child restraints using a seat belt (child restraint lock function belt) Rear-facing (vehicles without rear seats) ⎯ Infant seat/con- ■ vertible seat Never install a rear-facing child restrain. Your vehicle is not designed to carry and infant. Rear-facing (vehicles with rear seats) ⎯...
Page 61 1-1. For safe use While pushing child restraint system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 62 1-1. For safe use While pushing child restraint system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 63 1-1. For safe use Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap (Access Cab mod- els) Vehicles without rear seats ...
Page 64 1-1. For safe use Replace the head restraint. Vehicles with rear seats  Remove the anchor bracket covers. Store the removed covers in a safe place such as the glove box. Secure the child restraint system using the seat belt or the lower anchors.
Page 65 1-1. For safe use Child restraint systems with a top tether strap (Double Cab mod- els) Remove the head restraint. Installing position: Outer rear seat Center rear seat Latch the hook onto the anchor bracket. Swing the seatback forward slightly. (→P. 133) Latch the hook onto the anchor bracket.
Page 66 1-1. For safe use ■ Laws and regulations pertaining to anchorages The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to the SAE J1819. WARNING ■...
Page 67 1-1. For safe use WARNING ■ When installing a child restraint system ● When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the child’s shoulder.
Page 68: Exhaust Gas Precautions
Toyota dealer as soon as possible. ● Toyota does not recommend occupying the rear cargo area when it is fitted with a slide-in camper, camper shell or other type cover while the engine is running. This caution applies to both driving and stopped, or parked situa- tions with the engine running.
Page 69: Theft Deterrent System
1-2. Theft deterrent system ∗ Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.
Page 70 1-2. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the grip portion of the key is in contact with a metallic object ●...
Page 71 1-2. Theft deterrent system For vehicles sold in New Caledonia ...
Page 72 1-2. Theft deterrent system...
Page 73 1-2. Theft deterrent system...
Page 74 1-2. Theft deterrent system...
Page 75 1-2. Theft deterrent system...
Page 76 1-2. Theft deterrent system...
Page 77 1-2. Theft deterrent system...
Page 78 1-2. Theft deterrent system NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
Page 79: Alarm
1-2. Theft deterrent system ∗ Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: ● A locked door is unlocked or opened in any way other than using the entry function, wireless remote control or mechanical key.
Page 80 1-2. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type alarm system. ■ Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following: ● Nobody is in the vehicle. ●...
Page 81 1-2. Theft deterrent system ■ Alarm-operated door lock In the following cases, depending on the situation, the door may automatically lock to prevent improper entry into the vehicle: ● When a person remaining in the vehicle locks the door and the alarm is acti- vated.
Page 82 1-2. Theft deterrent system...
Page 83: Instrument Cluster
Instrument cluster Instrument cluster Warning lights and indicators ......84 Gauges and meters .... 90 Multi-information display ..94 Fuel consumption information ...... 101...
Page 84: Warning Lights And Indicators
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all warning lights and indicators illuminated.
Page 85 2. Instrument cluster Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems. Brake system warning Rear differential lock light (→P. 566) indicator (→P. 567) (U.S.A.) (Flashes rapidly) Low speed four-wheel Brake system warning drive indicator (→P. 567) light (→P.
Page 86 They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
Page 87: Indicators
2. Instrument cluster : The light comes on to indicate a malfunction. : The light flashes to indicate a malfunction. : This light illuminates on the multi-information display. : If equipped Indicators The indicators inform the driver of the operating state of the vehicle’s various systems.
Page 88 They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if the lights do not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
Page 89 Have the vehicle inspected by your Toyota dealer immedi- ately if this occurs.
Page 90: Gauges And Meters
2. Instrument cluster Gauges and meters Tachometer Displays the engine speed in revolutions per minute. Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). Low outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or lower. Speedometer Displays the vehicle speed.
Page 91 2. Instrument cluster Changing the odometer and trip meter display Pressing the button switches the display between the odometer, trip meters, and a blank display. Odometer ■ Displays the total distance the vehicle has been driven. Trip meter A /trip meter B ■...
Page 92 ● When “--” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer. ■ Liquid crystal display Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
Page 93 2. Instrument cluster WARNING ■ The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display.
Page 94: Multi-Information Display
2. Instrument cluster Multi-information display Display contents The multi-information display presents the driver with a variety of vehi- cle data. ● Menu icons Displays the following informa- tion when an icon is selected. (→P. 95) Some of the information may be displayed automatically depending on the situation.
Page 95: Drive Information
2. Instrument cluster Operating the meter control switches ■ Select an item/change pages Press: Enters/Sets Press and hold: Resets Switch menu/Displays the top screen Returns previous screen Drive information 1, 2 ● Average fuel economy /Tank average fuel economy /Trip aver- age fuel economy Displays the average fuel consumption since the function was reset, the vehicle was refueled, and the engine was started, respec-...
Page 96 2. Instrument cluster 1, 2 ● Trip average speed /Average speed Displays the engine was started and the average vehicle speed since the function was reset, respectively 1, 2 ● Trip distance /Distance Displays the engine was started and the distance since the function was reset, respectively ●...
Page 97 2. Instrument cluster Settings display Changing the settings ■ Select using the meter control switch. Select an item and then set it with the center button. Customizable items ■ ● PCS (Pre-Collision System) (if equipped) (→P. 235) • PCS Select to enable/disable the PCS (Pre-Collision System) function. •...
Page 98 2. Instrument cluster ● Accent color Select to change the accent colors on the screen, such as the cursor color. ● Speed limit display Select to set the display of speed limit information stored in the navigation system (if equipped) to on with the speed limit caution indicator (yellow) enabled, on with the speed limit caution not enabled, or off.
Page 99 2. Instrument cluster ■ Setting items ● Setting items are not selectable during driving and cannot be operated. Also, the settings screen is temporarily canceled in the following situations. • A warning message is displayed. • The vehicle starts off. ●...
Page 100 2. Instrument cluster WARNING ■ Caution for use while driving ● When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. ● Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc.
Page 101: Fuel Consumption Information
2. Instrument cluster ∗ Fuel consumption information The fuel consumption information can be displayed on Entune Premium Audio and Entune Audio Plus screen. Display the trip information or past record screen Press the “APPS” button, and then select “Eco” on the screen. Fuel consumption Trip information ■...
Page 102 2. Instrument cluster ■ Past record If the “Trip Information” screen is displayed, select “Past Record”. Resetting the past record data Best recorded fuel consump- tion Average fuel consumption (if equipped) Previous fuel consumption record Current fuel economy Update the average fuel consumption data The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated.
Page 103: Operation Of Each Component
Operation of each component 3-1. Key information 3-5. Opening, closing the windows and moon roof Keys ........104 Power windows ....147 3-2. Opening, closing and Back window (vehicles locking the doors with sliding type) ..... 150 Doors ........ 111 Power back window ..
Page 104: 3-1. Key Information
3-1. Key information Keys The keys The following keys are provided with the vehicle. Type A  Keys Key number plate Type B  Keys Key number plate Type C  Keys Operating the wireless remote con- trol function Key number plate...
Page 105 3-1. Key information Type D  Electronic keys • Operating the smart key sys- (→P. 123) • Operating wireless remote control function Mechanical keys Key number plate Wireless remote control (type C or type D) Type C  Locks all the doors (→P. 111) Unlocks all the doors (→P.
Page 106 3-1. Key information Using the mechanical key (type D) To take out the mechanical key, push the release button and take the key out. The mechanical key can only be inserted in one direction, as the key only has grooves on one side. If the key cannot be inserted in a lock cylinder, turn it over and reat- tempt to insert it.
Page 107 Type A, B and C  New genuine key can be made by your Toyota dealer using the other key and the key number stamped on your key number plate. Keep the plate in a safe place such as your wallet, not in the vehicle.
Page 108 ■ Confirmation of the registered key number The number of keys already registered to the vehicle can be confirmed. Ask your Toyota dealer for details. ■ Customization (type C or type D) Settings (e.g. wireless remote control system) can be changed.
Page 109 3-1. Key information ■ Certification for wireless remote control (type C) For vehicles sold in U.S.A. and New Caledonia  FCC ID: HYQ23AAH FCC ID: HYQ23AAN FCC ID: HYQ12BEL NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 110 Toyota dealer. ■ When an electronic key is lost (type D) If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit your Toyota dealer immediately with all remaining electronic keys that was provided with your vehicle.
Page 111: Doors
3-2. Opening, closing and locking the doors Doors Unlocking and locking the doors from the outside ◆ Vehicles without a smart key system  Locks all the doors Unlocks all the doors Turning the key unlocks the driver’s door. Turning the key again unlocks the other doors.
Page 112 3-2. Opening, closing and locking the doors ◆ Smart key system (if equipped) Carry the electronic key to enable this function. Grip the driver’s door handle to unlock the door. Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked.
Page 113 3-2. Opening, closing and locking the doors ■ If the smart key system or the wireless remote control does not operate properly (if equipped) Use the mechanical key to lock and unlock the doors. (→P. 611) Replace the battery with a new one if it is depleted. (→P. 537) Unlocking and locking the doors from the inside ◆...
Page 114 3-2. Opening, closing and locking the doors Locking the front doors from the outside without a key Move the inside lock button to the lock position. Close the door. Vehicles without a smart key system  The door cannot be locked if either of the front doors is open and the key is in the engine switch.
Page 115 3-2. Opening, closing and locking the doors Rear door child-protector lock (Double Cab models only) The door cannot be opened from inside the vehicle when the lock is set. Unlock Lock These locks can be set to prevent children from opening the rear doors.
Page 116 3-2. Opening, closing and locking the doors Setting and canceling the functions ■ The automatic door locking and unlocking functions can be set or canceled on the Entune Audio system screen (→P. 649) or by fol- lowing the procedure below. Vehicles without a smart key system: Close all the doors and turn the engine switch to the “ON”...
Page 117 3-2. Opening, closing and locking the doors ■ Customization that can be configured at Toyota dealer Settings (e.g. unlocking function using a key) can be changed. (Customizable features: →P. 649) WARNING ■ To prevent an accident Observe the following precautions while driving the vehicle.
Page 118: Tailgate
3-2. Opening, closing and locking the doors Tailgate The tailgate can be opened using the tailgate handle. The tail- gate can be locked/unlocked using a key. Locking/unlocking the tailgate Unlock the tailgate Lock the tailgate Opening/closing the tailgate Pull the handle Open the tailgate slowly Tailgate will open slowly due to damper.
Page 119 3-2. Opening, closing and locking the doors Removing the tailgate Before removing the tailgate ■ These connector covers are used when removing the tailgate, to prevent the back-up camera wire harness connectors from being contaminated. Connector cover (Gray) Connector cover (White) Store the connector covers in the glove box in a plastic bag when not using.
Page 120 3-2. Opening, closing and locking the doors Pull out the plastic wire protec- tor located in the vehicle bed by pressing the tabs and pulling the protector. Be careful not to pull out all of the tailgate wire harness. Doing so may result in damage to vehicle components.
Page 121 3-2. Opening, closing and locking the doors Removing the tailgate ■ Open the tailgate to the angle where you can release the brackets on the support cables from the lugs on both sides. Lift the support cable bracket up and slide it off. To unhook the support cable bracket, keep pulling up the clip on bracket...
Page 122 3-2. Opening, closing and locking the doors Rear step bumper For rear end protection and easier step-up loading. To get on the rear step bumper, use the shaded area in the illustra- tion. WARNING ■ Before removing the tailgate Disconnect the wire harness between the back-up camera and the vehicle. Failure to do so may result in serious personal injury or damage to the vehi- cle components.
Page 123: Smart Key System
3-2. Opening, closing and locking the doors ∗ Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ● Locks and unlocks the doors (→P. 112) ●...
Page 124 3-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of the driver’s door handle.
Page 125 3-2. Opening, closing and locking the doors Alarm Situation Correction procedure An attempt was made to open the door and exit the vehicle when Shift the shift lever to P. the shift lever was not in P. The engine switch was Interior alarm sounds turned to ACCESSORY continuously...
Page 126 3-2. Opening, closing and locking the doors ■ Conditions affecting operation The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system, wireless remote control and engine immobi- lizer system from operating properly.
Page 127 3-2. Opening, closing and locking the doors ■ Note for the entry function ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
Page 128 3-2. Opening, closing and locking the doors ● The lock sensor may not work properly if it comes into contact with ice, snow, mud, etc. Clean the lock sensor and attempt to operate it again, or use the lock sensor on the lower part of the door handle. ●...
Page 129 3-2. Opening, closing and locking the doors ■ Certification for the smart key system For vehicles sold in U.S.A. and New Caledonia  FCC ID: HYQ23AAP FCC ID: HYQ14FBA NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 130 (→P. 123) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitted radio waves.
Page 131: Adjusting The Seats
3-3. Adjusting the seats Front seats Adjustment procedure Seat position adjustment lever Seat lumbar support adjust- ment knob Seatback angle adjustment lever Active head restraints When occupant’s back presses against the seatback during a rear-end collision, the head restraint moves slightly for- ward to help reduce the risk of whiplash on the seat occupant.
Page 132 3-3. Adjusting the seats ■ Active head restraints Even small forces applied to the seatback may cause the head restraint to move. Pushing up a locked head restraint forcibly may show the head restraint inner structure. These do not indicate problems. During rear-end collision...
Page 133: Rear Seats
3-3. Adjusting the seats ∗ Rear seats Raising the bottom cushion (Access Cab models) Stow the seat belt buckles. This prevents the seat belt buckles from interfering with raising the bottom cushion. Raise the bottom cushion up while pulling the lever until it locks.
Page 134 3-3. Adjusting the seats Folding down the rear seats ■ Make sure to slide the front seat forward as much as possible. Remove the head restraints and swing the bottom cush- ion up by pulling the lock release strap. Attach the head restraints to the holders located on the back sides of the bottom cushions.
Page 135 3-3. Adjusting the seats WARNING ■ When raising the bottom cushion or fold the seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P (automatic transmission) or N (manual transmission).
Page 136: Head Restraints
3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Front seats Vertical adjustment Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. Lock release button Rear seats Access Cab models ...
Page 137 3-3. Adjusting the seats Double Cab models  Folding the head restrains (outer head restraints) To use Lift up and push down the head restraint to the lowest lock position. To fold Pull the head restraint up while pressing the lock release buttons. Lock release button Vertical adjustment (center head restraint) Pull the head restraints up.
Page 138 3-3. Adjusting the seats ■ Removing the head restraints Front seats  Pull the head restraint up while pressing the lock release button. Lock release button Rear seats (Double Cab models only)  Outer head restraints: Pull the head restraint up while pressing the both lock release buttons.
Page 139 3-3. Adjusting the seats ■ Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. ■ Adjusting the rear center seat head restraint (Double Cab models only) Always raise the head restraint one level from the stowed position when using.
Page 140: Steering Wheel
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.
Page 141 3-4. Adjusting the steering wheel and mirrors WARNING ■ Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury. ■...
Page 142: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.
Page 143 3-4. Adjusting the steering wheel and mirrors Auto anti-glare inside rear view mirror  Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Type A Type B   Changing automatic anti-glare function mode On/off When the automatic anti-glare function is in on mode, the indicator illumi- nates.
Page 144 3-4. Adjusting the steering wheel and mirrors ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate prop- erly, do not touch or cover them. WARNING Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury.
Page 145: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, press the switch. Right Down Left Folding the mirrors Push the mirror back in the direc- tion of the vehicle’s rear.
Page 146 3-4. Adjusting the steering wheel and mirrors ■ Mirror angle can be adjusted when Vehicles without a smart key system  The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system  The engine switch is in ACCESSORY or IGNITION ON mode. ■...
Page 147: Power Windows
3-5. Opening, closing the windows and moon roof Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Type A  Closing Opening One-touch opening (driver’s window only) : To stop the window partway, oper-...
Page 148 If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after perform- ing the above procedure correctly, have the vehicle inspected by your Toyota dealer.
Page 149 3-5. Opening, closing the windows and moon roof WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Closing the windows ● The driver is responsible for all the power window operations, including the operation for the passengers.
Page 150: Back Window (Vehicles With Sliding Type)
3-5. Opening, closing the windows and moon roof Back window (vehicles with sliding type) Opening and closing Open/close Push the lock release lever and slide the back window. ■ Closing the back window Make sure that the back window is securely closed after closing it. WARNING ■...
Page 151: Power Back Window
3-5. Opening, closing the windows and moon roof ∗ Power back window Opening and closing Opening Closing ■ The power back window can be operated when Vehicles without a smart key system  The engine switch is in the “ON” position. Vehicles with a smart key system ...
Page 152 3-5. Opening, closing the windows and moon roof WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Caution while driving Keep the back window closed while driving. If the back window is left open, the luggage may be unexpectedly thrown out, causing an accident.
Page 153: Moon Roof
3-5. Opening, closing the windows and moon roof ∗ Moon roof Use the overhead switches to open and close the moon roof and tilt it up and down. Opening and closing Opens the moon roof Closes the moon roof : Lightly press either way of the moon roof switch to stop the moon roof partway.
Page 154 3-5. Opening, closing the windows and moon roof ■ The moon roof can be operated when Vehicles without a smart key system  The engine switch is in the “ON” position. Vehicles with a smart key system  The engine switch is in IGNITION ON mode. ■...
Page 155 Check to make sure that the moon roof is completely closed and then release the switch. If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer. ■ Moon roof open reminder function An alarm will sound and message will be shown on the multi-information dis- play when the driver’s door is opened with the moon roof not fully closed and...
Page 156 After the moon roof will tilt up and down, release the switch. To ensure the initialization is complete, make sure automatic opening and closing functions work properly. ■ Customization that can be configured at Toyota dealer Settings (e.g. linked door lock operation) can be changed. (Customizable features: →P. 649) WARNING Observe the following precautions.
Page 157 3-5. Opening, closing the windows and moon roof...
Page 158: Driving
Driving 4-1. Before driving Driving the vehicle..... 160 Cargo and luggage ... 170 Vehicle load limits ..... 174 Trailer towing ....175 Dinghy towing ....192 4-2. Driving procedures Engine (ignition) switch (vehicles without a smart key system)..193 Engine (ignition) switch (vehicles with a smart key system).....
Page 159 ......308 4-5. Using the driving support Multi-terrain Select .... 310 systems Crawl Control ....314 Toyota Safety Sense P ..228 Clutch start cancel switch ......318 (Pre-Collision System) ..235 Driving assist systems ..319 (Lane Departure Alert) ..249 4-6.
Page 160: Driving The Vehicle
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine →P. 193, 196 Driving Automatic transmission  With the brake pedal depressed, shift the shift lever to D. (→P. 201) Release the parking brake. (→P. 210) Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle.
Page 161 4-1. Before driving Parking the vehicle Automatic transmission  With the shift lever in D, depress the brake pedal. Set the parking brake (→P. 210), and shift the shift lever to P (→P. 201). Vehicles without a smart key system: Turn the engine switch to the “LOCK”...
Page 162 4-1. Before driving ■ When starting off on an uphill (vehicles with the hill-start assist control system) The hill-start assist control will activate. (→P. 320) ■ Driving in the rain ● Drive carefully when it is raining, because visibility will be reduced, the win- dows may become fogged-up, and the road will be slippery.
Page 163 4-1. Before driving ■ Breaking in your new Toyota To extend the life of the vehicle, observing the following precautions is recom- mended: ● For the first 200 miles (300 km): Avoid sudden stops. ● For the first 500 miles (800 km): Do not tow a trailer.
Page 164 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When starting the vehicle (vehicles with an automatic transmission) Always keep your foot on the brake pedal while stopped with the engine running.
Page 165 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving the vehicle ● Do not drive in excess of the speed limit. Even if the legal speed limit per- mits it, do not drive over 85 mph (140 km/h) unless your vehicle has high- speed capability tires.
Page 166 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 167 4-1. Before driving WARNING ● Do not leave a door or window open if the curved glass is coated with a metallized film such as a silver-colored one. Reflected sunlight may cause the glass to act as a lens, causing a fire. ●...
Page 168 4-1. Before driving NOTICE ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain the engine output. Vehicles with an automatic transmission  ● Do not use the accelerator pedal or depress the accelerator and brake pedals at the same time to hold the vehicle on a hill.
Page 169 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function ●...
Page 170: Cargo And Luggage
Toyota accessories or their equivalent for the deck rails. Follow the manufacturer’s instruc- tions and precautions when install- ing a genuine Toyota accessory or equivalent. WARNING ■ When you secure cargo with the deck rails Be sure to follow the instructions below in order to avoid the cargo coming loose.
Page 171 4-1. Before driving Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) − (Total weight of occupants) Steps for Determining Correct Load Limit — (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.”...
Page 172 4-1. Before driving Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (→P. 623) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb.
Page 173 4-1. Before driving WARNING ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment: ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failure to do so may prevent the pedals from being depressed properly, may block the driver’s vision, or may result in items hitting the driver or passengers, possibly causing an accident.
Page 174: Vehicle Load Limits
4-1. Before driving Vehicle load limits Vehicle load limits include total load capacity, seating capacity, TWR (Trailer Weight Rating) and cargo capacity. ◆ Total load capacity (vehicle capacity weight): →P. 623 Total load capacity means the combined weight of occupants, cargo and luggage.
Page 175: Trailer Towing
To tow a trailer safely, use extreme care and drive the vehicle in accordance with your trailer’s characteristics and operating conditions. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Contact your Toyota dealer for further information about additional...
Page 176 4-1. Before driving Towing related terms GCWR (Gross Combination Weight Rating) ■ The maximum allowable gross combination weight. The gross combination weight is the sum of the total vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the weight of the trailer being towed (including the cargo in the trailer).
Page 177 4-1. Before driving TWR (Trailer Weight Rating) ■ The maximum allowable gross (With brakes) trailer weight. The gross trailer weight is the sum of the trailer weight and the weight of the cargo in the trailer. TWR is calculated assuming base vehicle with one driver, one front passenger, towing package (if available), hitch and...
Page 178 4-1. Before driving Weight limits ● The gross trailer weight must never exceed the TWR described in the table. (→P. 179) ● The gross combination weight must never exceed the GCWR described in the table. (→P. 179) ● The gross vehicle weight must never exceed the GVWR indicated on the Certification Label.
Page 179 4-1. Before driving GCWR, TWR, Unbraked TWR, Fifth wheel and Gooseneck towing Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. GCWR and TWR ■ Access Cab models ...
Page 180 : The model code is indicated on the Certification Label. ( P. 625) Unbraked TWR ■ 1000 lb. (450 kg) Fifth wheel and gooseneck towing TWR ■ Toyota does not recommend fifth wheel and gooseneck towing. : These models meet the tow-vehicle trailering requirement of SAE International per SAE J2807.
Page 181 4-1. Before driving Trailer Tongue Weight ● A recommended tongue weight or kingpin weight varies in accor- dance with the types of trailers or towing as described below. ● To ensure the recommended values shown below, the trailer must be loaded by referring to the following instructions. •...
Page 182 Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight require- ment of your vehicle.
Page 183 4-1. Before driving Selecting trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer cou- pler. Most couplers are stamped with the required trailer ball size.
Page 184 54 watts/4.5 amps of electrical current per side (right and left) for the trailer brake/turn light functions. Please contact your Toyota dealer with any questions or concerns. ■ Service connector for towing brake controller (vehicles with a towing...
Page 185 ● Speed limits for towing a trailer vary by state or province. Do not exceed the posted towing speed limit. ● Toyota recommends that the vehicle-trailer speed limit is 65 mph (104 km/h) on a flat, straight, dry road. Do not exceed this limit, the posted towing speed limit or the speed limit for your trailer as set forth in your trailer owner’s manual, whichever is lowest.
Page 186 4-1. Before driving ● Slow down before making a turn, in crosswinds, on wet or slippery surfaces, etc. Increasing vehicle speed can destabilize the trailer. ● Take care when passing other vehicles. Passing requires consider- able distance. After passing a vehicle, do not forget the length of your trailer, and be sure you have plenty of room before changing lanes.
Page 187 4-1. Before driving ● Always place wheel blocks under both the vehicle’s and the trailer’s wheels when parking. Apply the parking brake firmly, and put the transmission in P (automatic transmission) or in 1 or R (manual transmission). Avoid parking on a slope, but if unavoidable, do so only after performing the following: Apply the brakes and keep them applied.
Page 188 4-1. Before driving ■ Matching trailer ball height to trailer coupler height No matter which class of tow hitch applies, for a more safe trailer hookup, the trailer ball setup must be the proper height for the coupler on the trailer. Coupler Trailer ball ■...
Page 189 Break-in schedule If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential or wheel bearing), Toyota rec- ommends that you do not tow a trailer until the vehicle has been driven for over 500 miles (800 km).
Page 190 4-1. Before driving WARNING ■ Trailer towing precautions To tow a trailer safely, use extreme care and drive the vehicle in accordance with the trailer’s characteristics and operating conditions. Failure to do so could cause an accident resulting in death or serious injury. Vehicle stability and braking performance are affected by trailer stability, brake setting and performance, and the hitch.
Page 191 NOTICE ■ When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. ■ Do not directly splice trailer lights Do not directly splice trailer lights.
Page 192: Dinghy Towing
4-1. Before driving Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with the four wheels on the ground.
Page 193: Engine (Ignition) Switch (Vehicles Without A
4-2. Driving procedures Engine (ignition) switch (vehicles without a smart key system) Starting the engine Automatic transmission  Check that the parking brake is set. Check that the shift lever is set in P. Firmly depress the brake pedal. Turn the engine switch to the “START” position to start the engine. Manual transmission ...
Page 194 ■ If the engine does not start (vehicles with engine immobilizer system) The engine immobilizer system may not have been deactivated. (→P. 69) Contact your Toyota dealer. ■ When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 195 Do not crank the engine for more than 30 seconds at a time. This may overheat the starter and wiring system. ● Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately.
Page 196: Engine (Ignition) Switch (Vehicles With A Smart Key System)
4-2. Driving procedures Engine (ignition) switch (vehicles with a smart key system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine Check that the parking brake is set. Check that the shift lever is in P.
Page 197 4-2. Driving procedures Stopping the engine Stop the vehicle. Set the parking brake (→P. 210), and shift the shift lever to P. Press the engine switch. Release the brake pedal and check that the display on the instru- ment cluster is off. Changing engine switch modes Modes can be changed by pressing the engine switch with brake pedal released.
Page 198 If the engine does not start ● The engine immobilizer system may not have been deactivated. (→P. 69) Contact your Toyota dealer. ● Check that the shift lever is securely set in P. The engine may not start if the shift lever is displaced out of P.
Page 199 ■ When “Smart Entry & Start System Check” is displayed on the multi- information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ If the electronic key battery is depleted →P. 537 ■...
Page 200 Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. ■ Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
Page 201: Automatic Transmission
4-2. Driving procedures ∗ Automatic transmission Shifting the shift lever Vehicles without a smart key system: While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. When shifting the shift lever between P and D, make sure that the vehi- cle is completely stopped.
Page 202 4-2. Driving procedures Shift position purpose Shift position Function Parking the vehicle/starting the engine Reversing Neutral (Condition in which the power is not transmitted) Normal driving S mode driving (→P. 204) : To improve fuel efficiency and reduce noises, set the shift lever in the D position for normal driving.
Page 203 4-2. Driving procedures Selecting power mode Use when high levels of response and feeling are desirable, such as when driving in mountainous regions or when pulling a trailer. Press the “ECT PWR” button to select power mode. The “ECT PWR” indicator comes on. Press the button again to cancel power mode.
Page 204 4-2. Driving procedures Selecting shift ranges in the S position When the shift lever is in the S position, the shift lever can be oper- ated as follows: Upshifting Downshifting The initial shift range in S mode is set automatically to 5 or 4 accord- ing to vehicle speed.
Page 205 If the shift lever cannot be shifted with your foot on the brake pedal, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 206 If the “S” indicator does not come on even after shifting the shift lever to S This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer, immediately. ■ Downshifting restrictions warning buzzer (S mode) To help ensure safety and driving performance, downshifting operation may sometimes be restricted.
Page 207: Manual Transmission
4-2. Driving procedures ∗ Manual transmission Shifting the shift lever Fully depress the clutch pedal before operating the shift lever, and then release it slowly. ∗ : If equipped...
Page 208 4-2. Driving procedures ■ Maximum allowable speed Observe the following maximum allowable speeds in each gear when maxi- mum acceleration is necessary. mph (km/h) Shift position Transfer position Maximum speed “2WD” and “4H” 32 (52) “4L” 12 (20) “2WD” and “4H” 64 (103) “4L”...
Page 209: Turn Signal Lever
4-2. Driving procedures Turn signal lever Operating instructions Right turn Lane change to the right (move the lever partway and release The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release The left hand signals will flash 3 times.
Page 210: Parking Brake
4-2. Driving procedures Parking brake To set the parking brake, fully pull the parking brake lever while depressing the brake U.S.A. Canada pedal. To release the parking brake, slightly raise the lever and lower it completely while press- ing the button. ■...
Page 211: Operating The Lights And Wipers
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Turning the end of the lever turns on the lights as follows: Type A  The side marker, parking, tail, license plate, instru- (U.S.A.) (Canada) ment panel lights and day- time running lights...
Page 212 4-3. Operating the lights and wipers Type B  The side marker, parking, tail, license plate, instru- ment panel lights and day- time running lights (→P. 213) turn on. The headlights and all lights listed above (except daytime running lights) turn on.
Page 213 4-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off.
Page 214 4-3. Operating the lights and wipers ■ Automatic light off system When the light switch is in : The lights turn off 30 seconds after the engine switch is turned to the “LOCK” position (vehicles without a smart key system) or off (vehicles with a smart key system) and a door is opened and all of the doors are closed.
Page 215: Automatic High Beam
4-3. Operating the lights and wipers ∗ Automatic High Beam The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of vehicles ahead etc., and automatically turns the high beam on or off as necessary.
Page 216 4-3. Operating the lights and wipers Turning the high beam on/off manually Switching to low beam ■ Pull the lever to the original position. The Automatic High Beam indi- cator will turn off. Push the lever away from you to activate the Automatic High...
Page 217 4-3. Operating the lights and wipers ■ High beam automatic turning on or off conditions ● When all of the following conditions are fulfilled, the high beam will be auto- matically turned on (after approximately 1 second): • Vehicle speed is above approximately 21 mph (34 km/h). •...
Page 218 4-3. Operating the lights and wipers ● The high beam may be turned on or off when the driver does not expect it. ● Bicycles or similar objects may not be detected. ● In the situations shown below, the system may not be able to accurately detect surrounding brightness levels.
Page 219 3 times. Automatic High Beam (headlights) may turn on even the vehicle is stopped. ■ If “Headlight System Malfunction. Visit Your Dealer.” is displayed on the multi-information display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer.
Page 220: Fog Light Switch
4-3. Operating the lights and wipers ∗ Fog light switch The fog lights secure excellent visibility in difficult driving con- ditions, such as in rain and fog. (U.S.A.) or (Canada) Turns the front fog lights Turns the front fog lights ■...
Page 221: Windshield Wipers And Washer
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever Operate the lever as follows to operate the wipers. Vehicles without intermittent type  (U.S.A.) or (Canada) (U.S.A.) or (Canada) speed windshield wiper operation (U.S.A.) or (Canada) High speed...
Page 222 4-3. Operating the lights and wipers Vehicles with intermittent type  (U.S.A.) or (Canada) (U.S.A.) or (Canada) Intermittent windshield wiper operation (U.S.A.) or (Canada) speed windshield wiper operation (U.S.A.) or (Canada) High speed windshield wiper operation (U.S.A.) or (Canada) Temporary operation Wiper intervals can be adjusted when intermittent operation is selected.
Page 223 Do not operate the switch continually as the washer fluid pump may over- heat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 224: 4-4. Refueling
4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Vehicles without a smart key system: Turn the engine switch to the “LOCK” position and ensure that all the doors and windows are closed.
Page 225 4-4. Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity.
Page 226 4-4. Refueling Opening the fuel tank cap Open the fuel filler door. Turn the fuel tank cap slowly open. Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction.
Page 227 ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Otherwise, doing so may cause a fire or other incident which may result in death or serious injury.
Page 228: 4-5. Using The Driving Support Systems
■ Toyota Safety Sense P The Toyota Safety Sense P is designed to operate under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants and the vehicle in the case of a collision or assist the driver in normal driving conditions.
Page 229 Toyota will not disclose the recorded data to a third party except: • With the consent of the vehicle owner or with the consent of the lessee if the vehicle is leased •...
Page 230 4-5. Using the driving support systems Sensors Two types of sensors, located behind the front grille and windshield, detect information necessary to operate the drive assist systems. Radar sensor Camera sensor WARNING ■ To avoid malfunction of the radar sensor Observe the following precautions.
Page 231 Do not subject the radar sensor or surrounding area to a strong impact. If the radar sensor, front grille, or front bumper has been subjected to a strong impact, have the vehicle inspected by your Toyota dealer. ● Do not disassemble the radar sensor.
Page 232 ● Do not attach any accessories that may obstruct the camera sensor to the hood, front grille or front bumper. Contact your Toyota dealer for details. ● If a surfboard or other long object is to be mounted on the roof, make sure that it will not obstruct the camera sensor.
Page 233 4-5. Using the driving support systems ■ Certification...
Page 234 4-5. Using the driving support systems...
Page 235: (Pre-Collision System)
4-5. Using the driving support systems ∗ PCS (Pre-Collision System) The pre-collision system uses a radar sensor and camera sen- sor to detect vehicles and pedestrians in front of your vehicle. When the system determines that the possibility of a frontal col- lision with a vehicle or pedestrian is high, a warning operates to urge the driver to take evasive action and the potential brake pressure is increased to help the driver avoid the collision.
Page 236 4-5. Using the driving support systems ◆ Pre-collision warning When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the multi- information display to urge the driver to take evasive action.
Page 237 4-5. Using the driving support systems WARNING ■ Limitations of the pre-collision system ● The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. Do not use the pre-collision system instead of normal braking operations under any circumstances.
Page 238 4-5. Using the driving support systems WARNING ■ When to disable the pre-collision system In the following situations, disable the system, as it may not operate prop- erly, possibly leading to an accident resulting in death or serious injury: ● When the vehicle is being towed ●...
Page 239 4-5. Using the driving support systems Changing settings of the pre-collision system Enabling/disabling the pre-collision system ■ The pre-collision system can be enabled/disabled on the multi-information display as following: The system is automatically enabled each time the engine switch is turned to the “ON”...
Page 240 4-5. Using the driving support systems Changing the pre-collision warning timing ■ The pre-collision warning timing can be changed on the multi-infor- mation display as following: The operation timing setting is retained when the engine switch is turned off. Press “<” or “>” of meter control switches and select Press “∧”...
Page 241 4-5. Using the driving support systems ■ Operational conditions The pre-collision system is enabled and the system determines that the pos- sibility of a frontal collision with a vehicle or pedestrian is high. Each function is operational at the following speeds: ●...
Page 242 4-5. Using the driving support systems ■ Pedestrian detection function The pre-collision system detects pedestri- ans based on the size, profile, and motion of a detected object. However, a pedes- trian may not be detected depending on the surrounding brightness motion, posture, angle...
Page 243 4-5. Using the driving support systems ■ Conditions under which the system may operate even if there is no pos- sibility of a collision ● In some situations such as the following, the system may determine that there is a possibility of a frontal collision and operate. •...
Page 244 4-5. Using the driving support systems • When driving on a narrow path surrounded by a structure, such as in a tunnel or on an iron bridge • When there is a metal object (manhole cover, steel plate, etc.), steps, or a protrusion on the road surface or roadside •...
Page 245 4-5. Using the driving support systems • When there are patterns or paint on the road or a wall that may be mis- taken for a vehicle or pedestrian • When driving near an object that reflects radio waves, such as a large truck or guardrail •...
Page 246 4-5. Using the driving support systems • When a vehicle ahead is not directly in front of your vehicle • When driving in inclement weather such as heavy rain, fog, snow or a sandstorm • When the vehicle is hit by water, snow, dust, etc., from a vehicle ahead •...
Page 247 4-5. Using the driving support systems ● In some situations such as the following, sufficient braking force may not be obtained, preventing the system from performing properly: • If the braking functions cannot operate to their full extent, such as when the brake parts are extremely cold, extremely hot, or wet •...
Page 248 If the PCS warning light continues to flash or remains illuminated or the warning message does not disappear even though the vehicle has returned to normal, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ If VSC is disabled ●...
Page 249: (Lane Departure Alert)
4-5. Using the driving support systems ∗ LDA (Lane Departure Alert) Summary of functions When driving on roads with white (yellow) lines, this function alerts the driver when the vehicle might depart from its lane. The LDA system recognizes visi- ble white (yellow) lines with the camera sensor on the upper por- tion of the windshield.
Page 250 4-5. Using the driving support systems ◆ Vehicle sway warning When the vehicle is swaying or appears as if it may depart from its lane multiple times, the warning buzzer sounds and a message is displayed on the multi-information display to alert the driver.
Page 251 4-5. Using the driving support systems WARNING ■ Before using LDA system Do not rely solely upon the LDA system. The LDA system does not auto- matically drive the vehicle or reduce the amount of attention that must be paid to the area in front of the vehicle. The driver must always assume full responsibility for driving safely by always paying careful attention to the sur- rounding conditions and operating the steering wheel to correct the path of the vehicle.
Page 252 Do not install or place anything on the hood or grille. Also, do not install a grille guard (bull bars, kangaroo bar, etc.). ● If your windshield needs repairs, contact your Toyota dealer. Turning LDA system on Press the LDA switch to turn the LDA system on.
Page 253 4-5. Using the driving support systems Indications on multi-information display LDA indicator The illumination condition of the indicator informs the driver of the system operation status. Illuminated in green: LDA system is operating. Flashing in yellow: Lane departure alert function is operating.
Page 254 4-5. Using the driving support systems ■ Operation conditions of each function ● Lane departure alert function This function operates when all of the following conditions are met. • LDA is turned on. • Vehicle speed is approximately 32 mph (50 km/h) or more. •...
Page 255 4-5. Using the driving support systems ■ Conditions in which functions may not operate properly In the following situations, the camera sensor may not detect white (yellow) lines and various functions may not operate normally. ● There are shadows on the road that run parallel with, or cover, the white (yellow) lines.
Page 256 4-5. Using the driving support systems ■ Warning message If the following warning message is displayed on the multi-information dis- play, follow the appropriate troubleshooting procedure. Warning messages are used to indicate a system malfunction or to inform the → driver of the need for caution while driving.
Page 257: Dynamic Radar Cruise Control
4-5. Using the driving support systems ∗ Dynamic radar cruise control Summary of functions In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates and decelerates to match the speed changes of the pre- ceding vehicle even if the accelerator pedal is not depressed. In con- stant speed control mode, the vehicle runs at a fixed speed.
Page 258 4-5. Using the driving support systems WARNING ■ Before using dynamic radar cruise control Driving safely is the sole responsibility of the driver. Do not rely solely on the system, and drive safely by always paying careful attention to your sur- roundings.
Page 259 4-5. Using the driving support systems WARNING ■ To avoid inadvertent dynamic radar cruise control activation Switch the dynamic radar cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for dynamic radar cruise control Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
Page 260 4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 328 ft. (100 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
Page 261 4-5. Using the driving support systems Example of constant speed cruising When there are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-to- vehicle distance can also be set by operating the vehicle-to-vehicle dis- tance switch.
Page 262 4-5. Using the driving support systems Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the “ON-OFF” button to activate the cruise control. Radar cruise control indicator will come on and a message will be displayed on the multi-information display. Press the button again to deacti- vate the cruise control.
Page 263 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 264 4-5. Using the driving support systems Changing the vehicle-to-vehicle distance (vehicle-to-vehicle dis- tance control mode) Pressing the switch changes the Preceding vehicle mark vehicle-to-vehicle distance as fol- lows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to the “ON”...
Page 265 4-5. Using the driving support systems Canceling and resuming the speed control Pulling the lever toward you cancels the speed control. Vehicle-to-vehicle distance control mode: The speed control is also canceled when the brake pedal is depressed. Constant speed control mode: The speed setting is also canceled when the brakes are applied or the clutch pedal (manual transmission...
Page 266 4-5. Using the driving support systems Selecting constant speed control mode When constant speed control mode is selected, your vehicle will main- tain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to a dirty radar sensor, etc.
Page 267 4WD models: The operation cannot be switched for 5 seconds or more after operating the front-wheel drive control switch. If vehicle-to-vehicle distance control mode is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer.
Page 268 4WD models: The operation cannot be switched for 5 seconds or more after operating the front-wheel drive control switch. If constant speed control mode is automatically canceled for any other rea- son, there may be a malfunction in the system. Contact your Toyota dealer. ■ Brake system operation sound...
Page 269 4-5. Using the driving support systems ● Vehicles with small rear ends (trailers with no load on board, etc.) ● Motorcycles traveling in the same lane ● When water or snow thrown up by the surrounding vehicles hinders the detecting of the sensor ●...
Page 270 4-5. Using the driving support systems ■ Conditions under which the vehicle-to-vehicle distance control mode may not function correctly In the case of the following conditions, operate the brake pedal (or accelera- tor pedal, depending on the situation) as necessary. As the sensor may not be able to correctly detect vehicles ahead, the system may not operate properly.
Page 271: Cruise Control
4-5. Using the driving support systems ∗ Cruise control Summary of functions Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch Setting the vehicle speed Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will come Press the button again to deacti- vate the cruise control.
Page 272 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direc- tion.
Page 273 If the cruise control speed cannot be set or if the cruise control cancels imme- diately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer.
Page 274 4-5. Using the driving support systems WARNING ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 275: Intuitive Parking Assist
4-5. Using the driving support systems ∗ Intuitive parking assist The distance from your vehicle to nearby obstacles when paral- lel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display and buzzer. Always check the surrounding area when using this system.
Page 276 4-5. Using the driving support systems The distance display and buzzer When the sensor detects an obstacle, the direction of and the approx- imate distance to the obstacle are displayed and the buzzer sounds. Intuitive parking assist display ■ Rear corner sensor operation Rear center sensor operation Sensor operation and distance to an obstacle ■...
Page 277 4-5. Using the driving support systems When multiple obstacles are detected in front and behind the ■ vehicle at the same time The buzzer will change in the following manner. ● If an obstacle has been detected within 1.5 ft. (45 cm) of the front or 2.8 ft.
Page 278 4-5. Using the driving support systems ■ The intuitive parking assist can be operated when Vehicles without a smart key system  The engine switch is in the “ON” position and the shift lever is in R. Vehicles with a smart key system ...
Page 279 • The area directly under the bumpers is not detected. • If obstacles draw too close to the sensor. • A non-genuine Toyota suspension (lowered suspension, etc.) is installed. • A backlit license plate, license plate holder, etc., are installed.
Page 280 When using intuitive parking assist In the following situations, the system may not function correctly due to a sensor malfunction, etc. Have the vehicle checked by your Toyota dealer. ● A beep does not sound when you turn the main switch on.
Page 281: Rear View Monitor System
4-5. Using the driving support systems Rear view monitor system The rear view monitor system assists the driver by displaying an image of the view behind the vehicle with fixed guide lines on the screen while backing up, for example while parking. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen.
Page 282 4-5. Using the driving support systems Using the rear view monitor system Screen description ■ Vehicle width guide lines The line indicates a guide path when the vehicle is being backed straight up. The displayed width is wider than the actual vehicle width. Vehicle center guide line This line indicates the estimated vehicle center on the ground.
Page 283 4-5. Using the driving support systems Rear view monitor system precautions Area displayed on screen ■ The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. The image adjustment proce- dure for the rear view monitor system screen is the same as the procedure for adjusting the...
Page 284 4-5. Using the driving support systems Differences between the screen and the actual road ■ The distance guide lines and the vehicle width guide lines may not actually be parallel with the dividing lines of the parking space, even when they appear to be so. Be sure to check visually. The distances between the vehicle width guide lines and the left and right dividing lines of the parking space may not be equal, even when they appear to be so.
Page 285 4-5. Using the driving support systems ● When the ground behind the vehicle slopes down sharply The distance guide lines will appear to be farther from the vehicle than the actual dis- tance. Because of this, objects will appear to be closer than they actually are.
Page 286 4-5. Using the driving support systems When approaching three-dimensional objects ■ The distance guide lines are displayed according to flat surfaced objects (such as the road). It is not possible to determine the posi- tion of three-dimensional objects (such as vehicles) using the vehi- cle width guide lines and distance guide lines.
Page 287 4-5. Using the driving support systems Vehicle width guide lines ■ Visually check the surroundings and the area behind the vehicle. In the case shown below, the truck appears to be outside of the vehi- cle width guide lines and the vehicle does not look as if it hits the truck.
Page 288 If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer. Likely cause Solution  The image is difficult to see •...
Page 289 4-5. Using the driving support systems WARNING ■ When using the rear view monitor system The rear view monitor system is a supplemental device intended to assist the driver when backing up. When backing up, be sure to visually check all around the vehicle both directly and using the mirrors before proceeding.
Page 290 Doing so may result in the camera malfunc- tioning. ● Do not expose the camera to strong impact as this could cause a malfunc- tion. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible.
Page 291: (Blind Spot Monitor)
4-5. Using the driving support systems ∗ BSM (Blind Spot Monitor) Summary of the Blind Spot Monitor The Blind Spot Monitor is a system that has 2 functions; ● The Blind Spot Monitor function Assists the driver in making the decision when changing lanes ●...
Page 292 4-5. Using the driving support systems Rear Cross Traffic Alert buzzer (Rear Cross Traffic Alert function only) When a vehicle approaching from the right or left rear of the vehicle is detected, a buzzer sounds from behind the left-hand rear pillar. ■...
Page 293: The Blind Spot Monitor Function
Do not modify the sensor or surrounding area on the bumper. ● Do not paint the rear bumper any color other than an official Toyota color. The Blind Spot Monitor function The Blind Spot Monitor function uses radar sensors to detect vehicles...
Page 294 4-5. Using the driving support systems The Blind Spot Monitor function detection areas The areas that vehicles can be detected in are outlined below. The range of the detection area extends to: Approximately 11.5 ft. (3.5 m) from the side of the vehicle The first 1.6 ft.
Page 295 4-5. Using the driving support systems ■ The Blind Spot Monitor function is operational when ● The BSM main switch is set to on. ● Vehicle speed is greater than approximately 10 mph (16 km/h) ■ The Blind Spot Monitor function will detect a vehicle when ●...
Page 296: The Rear Cross Traffic Alert Function
4-5. Using the driving support systems ● Instances of the Blind Spot Monitor function unnecessarily detecting a vehi- cle and/or object may increase under the following conditions: • When there is only a short distance between your vehicle and a guardrail, wall, etc.
Page 297 4-5. Using the driving support systems WARNING ■ Cautions regarding the use of the system The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. The Rear Cross Traffic Alert function is only an assist and is not a replace- ment for careful driving.
Page 298 4-5. Using the driving support systems ■ The Rear Cross Traffic Alert function is operational when ● The BSM main switch is set to on. ● The shift lever is in R. ● Vehicle speed is less than approximately 5 mph (8 km/h). ●...
Page 299: Four-Wheel Drive System
4-5. Using the driving support systems ∗ Four-wheel drive system Summary of functions Use the front-wheel drive control switch to select the following transfer modes: “2WD” (high speed position, two-wheel drive) Use this for normal driving on dry hard-surfaced roads. This position gives greater economy, quietest ride and least wear.
Page 300 4-5. Using the driving support systems Shifting between “2WD” and “4H” Shifting from “2WD” to “4H” ■ Reduce vehicle speed to less than 62 mph (100 km/h). Turn the front-wheel drive control switch to “4H”. The four-wheel drive indicator will come on. Shifting from “4H”...
Page 301 4-5. Using the driving support systems Shifting from “4L” to “4H” ■ Automatic transmission  Stop the vehicle completely and continue to depress the brake pedal. Shift the shift lever to N. Push and turn the front-wheel drive control switch to “4H”. The “4LO”...
Page 302 If the indicator light continues to blink even if doing so, contact your Toyota dealer as soon as possible. There may be a trouble in the four-wheel drive system.
Page 303: Auto Lsd System
4-5. Using the driving support systems AUTO LSD system The AUTO LSD system aids traction by using the traction con- trol system to control engine performance and braking when one of the rear wheels begins to spin. The system should be used only when one of the rear wheels spinning occurs in a ditch or rough surface.
Page 304 4-5. Using the driving support systems ■ If the engine is turned off and restarted The AUTO LSD system and the indicators are automatically turned off. ■ Reactivation of the VSC system linked to vehicle speed When the AUTO LSD system is turned on, the VSC and TRAC systems will turn on automatically if vehicle speed increases.
Page 305: Rear Differential Lock System
4-5. Using the driving support systems ∗ Rear differential lock system The rear differential lock system is provided for use only when wheel spinning occurs in a ditch or on a slippery or rugged sur- face. The rear differential lock system is effective in case one of the rear wheels is spinning.
Page 306 4-5. Using the driving support systems Manual transmission  Before using the rear differential lock system. Stop the vehicle or reduce your speed to less than 2 mph (3 km/h). Depress the clutch pedal and turn the front-wheel drive control switch in the “4L”...
Page 307 4-5. Using the driving support systems ■ After unlocking the rear differential Vehicles without a smart key system  To check that the indicator goes off, turn the engine switch to the “ON” posi- tion, but do not start the engine. Vehicles with a smart key system ...
Page 308: Active Traction Control System
4-5. Using the driving support systems ∗ Active traction control system The active traction control system automatically helps prevent the spinning of 4 wheels when the vehicle is started or acceler- ated on slippery road surfaces. System operation Stop the vehicle or reduce your speed to less than 2 mph (3 km/h). Depress the clutch pedal and turn the front-wheel drive control switch in the “4L”...
Page 309 4-5. Using the driving support systems ■ When the rear differential is locked (vehicles with the rear differential lock system) The active traction control system is activated only when the vehicle speed is less than 3 mph (6 km/h). ■ Sounds and vibrations caused by the active traction control system ●...
Page 310: Multi-Terrain Select
4-5. Using the driving support systems ∗ Multi-terrain Select Multi-terrain Select is a system that improves driveability in off- road situations. Select a mode that most closely matches the type of terrain on which you are driving from among 5 modes. Brake control can be optimized in accordance with the selected mode.
Page 311 4-5. Using the driving support systems Selectable modes A mode which matches the road conditions can be selected from among the following 5 modes. Position Symbol Mode Road conditions Suitable for muddy roads, sandy roads, snow-covered roads, dirt “Mud & Sand” trails and other slippery or dirty conditions Suitable for slippery conditions...
Page 312 4-5. Using the driving support systems Selecting modes Operate the Multi-terrain Select mode selector dial during Multi- terrain Select control to select a mode. ■ The Multi-terrain Select can be operated when ● The four-wheel drive control switch is in “4L” position. ●...
Page 313 “4L”, the “TRAC OFF” indicator will come on. ■ When there is a malfunction in the system The slip indicator light will come on. Have the vehicle inspected by your Toyota dealer immediately. WARNING ■ When using Multi-terrain Select...
Page 314: Crawl Control
4-5. Using the driving support systems ∗ Crawl Control Allows travel on extremely rough off-road surfaces at a fixed low speed without pressing the accelerator or brake pedal. Mini- mizes loss of traction or vehicle slip when driving on slippery road surfaces, allowing for stable driving.
Page 315 4-5. Using the driving support systems Speed modes The following table shows some typical terrains and the recom- mended speed modes. Position Speed mode Road conditions Rock, mogul (downhill) and gravel (downhill) Between low and medium Mogul (uphill) Medium Between medium Snow, mud, gravel (uphill), sand, high...
Page 316 4-5. Using the driving support systems ■ Automatic system cancelation In the following situations, the buzzer will sound intermittently and Crawl Con- trol will be canceled automatically. In this event, the Crawl Control indicator will flash and then goes off, and a message stating that Crawl Control has been turned off will be displayed on the multi-information display for several seconds.
Page 317 4-5. Using the driving support systems WARNING ■ When using Crawl Control Do not rely solely on Crawl Control. This function does not extend the vehi- cle’s performance limitations. Always check the terrain thoroughly and drive safely. ■ These conditions may cause the system may not operate correctly When driving on the following surfaces, the system may not be able to maintain a fixed low speed, which may result in an accident: ●...
Page 318: Clutch Start Cancel Switch
4-5. Using the driving support systems ∗ Clutch start cancel switch The switch allows the vehicle to be driven out of difficult situa- tions by cranking the engine with the clutch engaged. Never use the switch for normal engine starting. Be sure to follow the starting procedure.
Page 319: Driving Assist Systems
4-5. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supple- mentary and should not be relied upon too heavily when operat- ing the vehicle.
Page 320 4-5. Using the driving support systems ◆ Hill-start assist control (if equipped) Helps to prevent the vehicle from rolling backward when starting on an incline or slippery slope When the TRAC/VSC/Trailer Sway Control/hill-start assist control systems are operating The slip indicator light will flash while the TRAC/VSC/Trailer Sway Control/hill-start assist control systems are operating.
Page 321 Press the switch again to turn the system back on. ■ When the “TRAC OFF” indicator light comes on even if the VSC off switch has not been pressed TRAC and hill-start assist control cannot be operated. Contact your Toyota dealer.
Page 322 4-5. Using the driving support systems ■ Sounds and vibrations caused by the ABS, Multi Terrain ABS, brake assist, VSC, TRAC and Trailer Sway Control systems ● A sound may be heard from the engine compartment when the brake pedal is depressed repeatedly, when the engine is started or just after the vehicle begins to move.
Page 323 4-5. Using the driving support systems ■ Automatic system cancelation of hill-start assist control The hill-start assist control will turn off in any of the following situations: ● The shift lever is moved to P or N. ● The accelerator pedal is depressed. ●...
Page 324 The ABS, Multi Terrain ABS, TRAC, VSC and Trailer Sway Control systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■...
Page 325: Driving Tips
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.
Page 326 The shift lever will be locked if it is attempted to be shifted from P to any other position without depressing the brake pedal. If the shift lever can be shifted from P, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. Selecting tire chains Use the correct tire chain size when mounting the tire chains.
Page 327 4-6. Driving tips ■ Tire chain installation Observe the following precautions when installing and removing chains: ● Install and remove tire chains in a safe location. ● Install tire chains on the rear tires. Do not install tire chains on the front tires. ●...
Page 328 NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 329: Off-Road Precautions
4-6. Driving tips Off-road precautions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity to make it capable of performing in a wide variety of off-road applications. Off-road vehicle features ●...
Page 330 4-6. Driving tips WARNING ■ Off-road vehicle precautions Always observe the following precautions to minimize the risk of death, seri- ous injury or damage to your vehicle: ● In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt.
Page 331 4-6. Driving tips ■ Additional information for off-road driving For owners in U.S. mainland, Hawaii and Puerto Rico:  To obtain additional information pertaining to driving your vehicle off-road, consult the following organizations. ● State and Local Parks and Recreation Departments ●...
Page 332 4-6. Driving tips NOTICE ■ To prevent the water damage Take all necessary safety measures to ensure that water damage to the engine or other components does not occur. ● Water entering the engine air intake will cause severe engine damage. ●...
Page 333 4-6. Driving tips...
Page 334: Multimedia
Multimedia 5-1. Basic Operations Audio system types... 336 Audio system ....338 Steering wheel audio switches ......340 USB Port/AUX Port ... 341 Basic audio operations..343 5-2. Setup Setup menu....... 345 General settings....346 Audio settings ....348 Display settings....349 Voice settings....
Page 335 Multimedia ® 5-5. Playing an audio CD and 5-8. Bluetooth audio MP3/WMA/AAC discs ® Listening to Bluetooth CD player operation ..357 audio ....... 385 ® 5-6. Using an external device 5-9. Bluetooth phone ® Listening to an iPod ..362 Using a Bluetooth phone ......
Page 336: 5-1. Basic Operations
5-1. Basic Operations Audio system types Entune Audio  →P. 338 Entune Audio Plus  Refer “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.
Page 337 5-1. Basic Operations Entune Premium Audio  Refer “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.
Page 338: Audio System
5-1. Basic Operations Audio system Operations such as listening to audio, using the hands-free phone and changing multimedia system settings are started by using the following buttons. Audio system operation buttons button ® Press this button to access the Bluetooth hands-free system.
Page 339 5-1. Basic Operations Operating the touch screen By touching the screen with your finger, you can control the multime- dia system, etc. Drag ■ Touch the screen with your finger, and move the screen to the desired position. ● Scrolling the lists Flick ■...
Page 340: Steering Wheel Audio Switches
5-1. Basic Operations Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of multimedia sys- tem or navigation system. For details, refer to the manual pro- vided with the multimedia system or navigation system.
Page 341: Usb Port/Aux Port
5-1. Basic Operations USB Port/AUX Port Connect an iPod, USB memory device or portable audio player to the USB/AUX port as indicated below. Select “iPod”, “USB” or “AUX” on the “Select Audio Source” screen and the device can be operated via multimedia system. Connecting using the USB/AUX port Type A Type B...
Page 342: Usb Memory
5-1. Basic Operations iPod ■ Open the cover and connect an iPod using an iPod cable. Turn on the power of the iPod if it is not turned on. USB memory ■ Open the cover and connect the USB memory device. Turn on the power of the USB memory device if it is not turned on.
Page 343: Basic Audio Operations
5-1. Basic Operations Basic audio operations Basic audio operations and functions common to each mode are explained in this section. Operating the multimedia system Press this button to eject a disc Insert a disc into the disc slot Audio source selection screen appears (→P. 351) Turn this knob to select radio station bands, tracks and files.
Page 344 5-1. Basic Operations ■ Using cellular phones Interference may be heard through the multimedia system’s speakers if a cel- lular phone is being used inside or close to the vehicle while the multimedia system is operating. WARNING ■ For vehicles sold in U.S.A. and Canada ●...
Page 345: Setup
5-2. Setup Setup menu You can adjust the multimedia system to your desired settings. Display “Setup” screen Press the “SETUP” button to display the “Setup” screen. Select to adjust the settings for operation sounds, screen ani- mation, etc. (→P. 346) Select to set the voice settings.
Page 346: General Settings
Select to delete personal data (→P. 347) Select to update program versions. For details, contact your Toyota dealer. Select to display the software information. Notices related to third party software used in this product are enlisted. (This includes instructions for obtaining such software, where applicable.) ■...
Page 347 5-2. Setup Setting the clock Select “Clock” on the “General Settings” screen. Adjust the time, then select “OK”. Delete personal data Select “Delete Personal Data” on the “General Settings” screen. Select “Delete”. Check carefully beforehand, as data cannot be retrieved once deleted. A confirmation screen will be displayed.
Page 348: Audio Settings
5-2. Setup Audio settings Settings are available for adjusting the radio operation, cover art, etc. Screen for audio settings Press the “SETUP” button. Select “Audio” on the “Setup” screen. Number of Radio Presets Select the number of radio preset stations. Display Cover Art on/off Automatic Sound Levelizer Automatic sound leveliser (ASL)
Page 349: Display Settings
5-2. Setup Display settings Settings are available for adjusting the contrast and brightness of the screen. Screen for display settings Press the “SETUP” button. Select “Display” on the “Setup” screen. Adjust screen contrast/bright- ness Adjust screen contrast/bright- ness of the rear view monitor camera Changes to day mode.
Page 350: Voice Settings
5-2. Setup Voice settings This screen is used for guidance for voice command systems setting. Adjust the voice guidance vol- ume setting. voice recognition prompts “High”, “Low” or “Off”. Set the train voice recognition. Set the voice prompt interrupt on/off. Set the voice recognition tuto- rial ■...
Page 351: Using The Multimedia System
5-3. Using the multimedia system Selecting the audio source Switching between audio sources such as radio and CD are explained in this section. Selecting the audio source Press the “AUDIO” button to display the audio source selection screen. If the audio source selection screen is not displayed, press the “AUDIO” button again.
Page 352: List Screen Operation
5-3. Using the multimedia system List screen operation When a list screen is displayed, use the appropriate buttons to scroll through the list. How to scroll : Select to scroll to the next or previous page. : If appears to the right of titles, the complete titles are too long for the display.
Page 353 5-3. Using the multimedia system Selecting, fast-forwarding and reversing tracks/files/songs Selecting a track/file/song ■ Press “SEEK>” “<TRACK” button turn “TUNE·SCROLL” knob to select the desired track/file/song number. To fast-forward or reverse, press and hold the “SEEK>” or “<TRACK” button. Selecting a track/file/song from the track/file/song list ■...
Page 354: Optimal Use Of The Multimedia System
5-3. Using the multimedia system Optimal use of the multimedia system On the “Sound Settings” screen, sound quality (Treble/Mid/ Bass), volume balance can be adjusted. How to adjust the sound settings and sound quality 1 2 3 Select “-” or “+” to adjust the treble, mid or bass to a level between -5 and 5.
Page 355: Using The Radio
5-4. Using the radio Radio operation Select “AM” or “FM” on the audio source selection screen to begin listening to the radio. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. Audio source selection screen appears Preset stations...
Page 356 5-4. Using the radio Setting station presets Search for desired stations by turning the “TUNE·SCROLL” knob or pressing the “SEEK>” or “<TRACK” button. Select “(add new)” To change the preset station to a different one, select and hold the preset station.
Page 357: Mp3/Wma/Aac Discs
■ Error messages If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause Correction procedures • The disc is dirty or •...
Page 358 5-5. Playing an audio CD and MP3/WMA/AAC discs ■ Discs that can be used Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc fea- tures, or due to scratches, dirt or deterioration. CDs with copy-protection features may not play correctly.
Page 359 5-5. Playing an audio CD and MP3/WMA/AAC discs ● WMA file compatibility • Compatible standards WMA Ver. 7, 8, 9 (only compatible with Windows Media Audio Standard) • Compatible sampling frequencies 32, 44.1, 48 (kHz) • Compatible bit rates (only compatible with 2-channel playback) Ver.
Page 360 5-5. Playing an audio CD and MP3/WMA/AAC discs ● ID3, WMA and AAC tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
Page 361 5-5. Playing an audio CD and MP3/WMA/AAC discs NOTICE ■ Discs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, Dual Discs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function.
Page 362: 5-6. Using An External Device
5-6. Using an external device Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Select “iPod” on the audio source selection screen. When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen.
Page 363 5-6. Using an external device ■ About iPod ● “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance stan- dards.
Page 364 5-6. Using an external device ■ iPod problems To resolve most problems encountered when using your iPod, disconnect your iPod from the vehicle iPod connection and reset it. For instructions on how to reset your iPod, refer to your iPod Owner’s Manual. ■...
Page 365 5-6. Using an external device ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. ● Made for • iPod touch (5th generation) •...
Page 366: Listening To A Usb Memory Device
5-6. Using an external device Listening to a USB memory device Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Select “USB” on the audio source selection screen. Connecting a USB memory device →P. 341 Audio control screen Pressing the “AUDIO”...
Page 367 5-6. Using an external device ■ Error messages for USB memory Message Cause/Correction procedures “Connection error. Please consult your Owner’s Man- This indicates a problem with the USB mem- ual for instruction on how to ory device or its connection. connect the USB device.”...
Page 368 5-6. Using an external device ● MP3 file compatibility • Compatible standards MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III) • Compatible sampling frequencies MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) •...
Page 369 5-6. Using an external device ● MP3, WMA and AAC playback • When a device containing MP3, WMA and AAC files is connected, all files in the USB memory device are checked. Once the file check is fin- ished, the first MP3, WMA and AAC file is played. To make the file check finish more quickly, we recommend that you do not include any files other than MP3, WMA and AAC files or create any unnecessary folders.
Page 370: Using The Aux Port
5-6. Using an external device Using the AUX port To use the AUX port, connect a portable player, press the “AUDIO” button, then select “AUX” on display the audio control screen. Connecting a portable audio player →P. 341 ■ Operating portable audio players connected to the multimedia system The volume can be adjusted using the vehicle’s audio controls.
Page 371: Communication
® 5-7. Connecting Bluetooth Preparations to use wireless communica- tion ® The following can be performed using Bluetooth wireless com- munication: A portable audio player can be operated and listened to via ■ multimedia system Hands-free phone calls can be made via a cellular phone ■...
Page 372: 5-7. Connecting Bluetooth
® 5-7. Connecting Bluetooth For vehicles sold in Canada  NOTE: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.
Page 373 ® 5-7. Connecting Bluetooth Access to http://www.ptc.panasonic.eu/, enter the below Model No. into the keyword search box, you can download the latest “DECLARATION of CON- FORMITY” (DoC). Model No. YEAP01D104...
Page 374 ® 5-7. Connecting Bluetooth...
Page 375 ® 5-7. Connecting Bluetooth Device registration/connection flow ® 1. Register the Bluetooth device to be used with multimedia system (→P. 377, 378, 379) ® 2. Connect the Bluetooth device to be used (→P. 381) To be used for audio To be used for hands-free phone ®...
Page 376 ® 5-7. Connecting Bluetooth Registering and connecting from the “Bluetooth Setup” screen To display the screen shown below, press the “SETUP” button and select “Bluetooth ” on the “Setup” screen. Select to connect the device to be used with multimedia sys- tem.
Page 377: For The First Time
® 5-7. Connecting Bluetooth ® Registering a Bluetooth audio player for the first time ® To use the Bluetooth Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the ®...
Page 378: Phone For The First Time
® 5-7. Connecting Bluetooth ® Registering a Bluetooth phone for the first time To use the hands-free system, it is necessary to register a ® Bluetooth phone with the system. Once the phone has been registered, it is possible to use the hands-free system.
Page 379: Device
® 5-7. Connecting Bluetooth ® Registering a Bluetooth device ® Bluetooth compatible phones (HFP) and portable audio players (AVP) can be registered simultaneously. You can register up to 5 ® Bluetooth devices. ® How to register a Bluetooth device Display the “Bluetooth Setup”...
Page 380 ® 5-7. Connecting Bluetooth Select “OK” when the connection status changes from “Connect- ing...” to “Connected”. If an error message is displayed, follow the guidance on the screen to try again. Registration can be performed from screens other than the “Bluetooth Setup”...
Page 381: Device
® 5-7. Connecting Bluetooth ® Connecting a Bluetooth device ® Up to 5 Bluetooth devices (Phones [HFP] and audio players [AVP]) can be registered. ® If more than 1 Bluetooth device has been registered, select which device to connect to. Press the “SETUP”...
Page 382 ® 5-7. Connecting Bluetooth Manual connection When auto connection has failed or “Bluetooth Power” is turned off, ® you must connect the Bluetooth device manually. ● Follow the steps in “Connecting a Bluetooth device” from step (→P. 381) : Bluetooth is a registered trademark of Bluetooth SIG, Inc. ®...
Page 383: Device Details
® 5-7. Connecting Bluetooth ® Displaying a Bluetooth device details You can confirm and change the registered device details. ® Bluetooth device registration status Display the “Bluetooth Setup” screen. (→P. 376) Select the device. Select “Device Info”. The following screen is dis- played: Device Name Change connection method...
Page 384: System Settings
® 5-7. Connecting Bluetooth ® Detailed Bluetooth system settings ® You can confirm and change the detailed Bluetooth settings. ® How to check and change detailed Bluetooth settings Display the “Bluetooth Setup” screen. (→P. 376) Select “System Settings”. The following screen is dis- played: Bluetooth Power on/off...
Page 385: Audio
® 5-8. Bluetooth audio ® Listening to Bluetooth audio ® The Bluetooth audio system enables the user to enjoy music played on a portable player from the vehicle speakers via wire- less communication. ® When a Bluetooth device cannot be connected, check the connec- tion status on the “Bluetooth Audio”...
Page 386: Phone
® 5-9. Bluetooth phone ® Using a Bluetooth phone The hands-free system is a function that allows you to use your cellular phone without touching it. ® ® This system supports Bluetooth . Bluetooth is a wireless data system that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls.
Page 387 ® 5-9. Bluetooth phone Telephone switch (→P. 399) ■ Microphone ■ The vehicle’s built in microphone is located near the ceiling, in the front of the vehicle, and is used when talking on the phone. The person you are speaking to can be heard from the front speak- ers.
Page 388: Making A Call
® 5-9. Bluetooth phone Making a call ® Once a Bluetooth phone is registered, you can make a call using the following procedure: Dialing Display the phone screen. (→P. 386) Select the “Dial Pad” tab and enter a phone number. To delete the input phone number, select For the first digit, you can enter “+”...
Page 389 ® 5-9. Bluetooth phone Press the switch on the steering wheel. If the phonebook is empty, a message will be displayed. ® For a PBAP compatible Bluetooth phone and “Automatic Transfer”  is off Select the desired item. Select to transfer new con- tacts from a cellular phone, select “Always”...
Page 390 ® 5-9. Bluetooth phone Calling using favorites list You can make a call using numbers registered in the contact. Display the phone screen. (→P. 386) Select “Favorites” tab. Select the desired number to make a call. Dialing from call history You can make a call using the call history, which has the 3 functions below.
Page 391: Receiving A Call
® 5-9. Bluetooth phone Receiving a call When a call is received, the following screen is displayed together with a sound. To answer the phone Press the switch on the steer- ing wheel or select To refuse a call Press the switch on the steering wheel or select To adjust the incoming call volume Turn the “PWR·VOL”...
Page 392: Speaking On The Phone
® 5-9. Bluetooth phone Speaking on the phone The following screen is displayed when speaking on the phone. To adjust the call volume Select “-” or “+”. You can also adjust the volume using the steering switches or the volume knob. To prevent the other party from hearing your voice Select “Mute”.
Page 393 ® 5-9. Bluetooth phone ■ Release Tones ● A continuous tone signal is a character string that consists of numbers and the characters “p” or “w”. (e.g.056133w0123p#1∗) ● When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have elapsed.
Page 394: Call Waiting
® 5-9. Bluetooth phone Call waiting When a call is interrupted by a third party while talking, an incoming call message will be displayed. To talk with the other party: • Press the switch on the steering wheel. • Select To refuse the call: •...
Page 395: Message Function
® 5-9. Bluetooth phone ® Bluetooth phone message function Received messages can be forwarded from the connected ® Bluetooth phone, enabling checking and replying using the multimedia system. ® Depending on the type of Bluetooth phone connected, received messages may not be transferred to the message inbox. If the phone does not support the message function, this func- tion cannot be used.
Page 396 ® 5-9. Bluetooth phone ■ Receiving a message ● Depending on the cellular phone used for receiving messages, or its regis- tration status with the navigation system, some information may not be dis- played. ● The pop up screen is separately available for incoming e-mail and SMS/ MMS messages under the following conditions: E-mail: •...
Page 397 ® 5-9. Bluetooth phone ■ Check the messages ® ● Depending on the type of Bluetooth phone being connected, it may be nec- essary to perform additional steps on the phone. ® ● Messages are displayed in the appropriate connected Bluetooth phone’s registered mail address folder.
Page 398 ® 5-9. Bluetooth phone Calling the message sender Calls can be made to an e-mail/SMS/MMS message sender’s phone number. Display the message inbox screen. (→P. 395) Select the desired message. Select Check that the “Call” screen is displayed. Calling from a number within a message ■...
Page 399: Wheel Switches
® 5-9. Bluetooth phone Using the steering wheel switches The steering wheel switches can be used to operate a connected cellular phone. Operating a telephone using the steering wheel switches Volume switch • Increase/Decrease the vol- • Press and hold: Continuously increase/ decrease the volume...
Page 400: Settings
® 5-9. Bluetooth phone ® Bluetooth phone settings You can adjust the hands-free system to your desired settings. “Phone/Message Settings” screen To display the screen shown below, press the “SETUP” button, and select “Phone” on the “Setup” screen. Set the phone connection (→P.
Page 401 ® 5-9. Bluetooth phone Sound setting Display the “Phone/Message Settings” screen. (→P. 400) Select “Sound Settings” on the “Phone/Message Settings” screen. Set the desired ringtone. Adjust the ringtone volume. Adjust the message readout volume. Set the desired incoming SMS/MMS tone. Adjust the incoming SMS/ MMS tone volume.
Page 402: Settings
® 5-9. Bluetooth phone Contact/Call History Settings ® The contacts can be transferred from a Bluetooth phone to the sys- tem. Contacts can also be added, edited and deleted. The call history can be deleted and contacts and favorites can be changed.
Page 403: Using A Bluetooth Phone
® 5-9. Bluetooth phone Update contacts from phone Operation methods differ between PBAP compatible and PBAP ® incompatible but OPP compatible Bluetooth phones. If your cellular phone is neither PBAP nor OPP compatible, the con- tacts cannot be transferred. ® For PBAP compatible Bluetooth Phones ■...
Page 404 ® 5-9. Bluetooth phone Updating the contacts in a different way (from the “Call His- ■ tory” screen) ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Transfer” is set to off. (→P. 402) Display the phone screen. (→P. 386) Select the “Call History”...
Page 405 ® 5-9. Bluetooth phone Editing the contact data ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Transfer” is set to off. (→P. 402) Select “Edit Contact”. Select the desired contact. Select corresponding to the desired name or number. For editing the name ...
Page 406 ® 5-9. Bluetooth phone Deleting the contact data ® For PBAP compatible Bluetooth phones, this function is available when “Automatic Transfer” is set to off. (→P. 402) Select “Delete Contacts”. Select the desired contact and select “Delete”. Select “Yes” when the confirmation screen appears. Deleting the contact in a different way (from the “Contact ■...
Page 407 ® 5-9. Bluetooth phone When 15 contacts have already been registered to the favorites list  When 15 contacts have already been registered to the favorites list, a registered contact needs to be replaced. Select “Yes” when the confirmation screen appears to replace a contact.
Page 408 ® 5-9. Bluetooth phone Deleting the contacts in the favorites list ■ Select “Remove Favorite”. Select the desired contacts and select “Remove”. Select “Yes” when the confirmation screen appears. Check that a confirmation screen is displayed when the opera- tion is complete. Deleting contacts in the favorites list in a different way (from the ...
Page 409 ® 5-9. Bluetooth phone Message Settings Display the “Phone/Message Settings” screen. (→P. 400) Select “Messaging Settings”. Select the desired item to be set. automatic message transfer on/off. automatic message readout on/off. Set the SMS/MMS notifica- tion popup on/off. Set the e-mail notification popup on/off.
Page 410 ® 5-9. Bluetooth phone Displaying the “Messaging Settings” screen in a different way ■ Display the phone screen. (→P. 386) Select Select “Settings”. Phone Display Settings Display the “Phone/Message Settings” screen. (→P. 400) Select “Phone Display Settings”. Select the desired item to be set.
Page 411: (Troubleshooting)
→ For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following web- site: http://www.toyota.com/entune The Bluetooth version of the connected cellular phone may be older than the specified version.
Page 412 ® 5-9. Bluetooth phone When registering/connecting a cellular phone  A cellular phone cannot be registered. An incorrect passcode was entered on the cellular phone. → Enter the correct passcode on the cellular phone. The registration operation has not been completed on the cellular phone side.
Page 413 → For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following web- site: http://www.toyota.com/entune Automatic phonebook transfer function on this system is set to off.
Page 414 ® 5-9. Bluetooth phone In other situations  Even though all conceivable measures have been taken, the symptom sta- tus does not change. The cellular phone is not close enough to this system. → Bring the cellular phone closer to this system. The cellular phone is the most likely cause of the symptom.
Page 415: Bluetooth
® 5-10. Bluetooth ® Bluetooth ® ■ When using the Bluetooth audio system ● In the following conditions, the system may not function. • If the portable audio player is turned off • If the portable audio player is not connected •...
Page 416 ® 5-10. Bluetooth ® ■ Bluetooth antenna The antenna is built into the display. If the portable audio player is behind the seat or in the glove box or console box, or is touching or covered by metal objects, the connection status may deteriorate.
Page 417 ® 5-10. Bluetooth ■ Compatible models ® The Bluetooth audio system supports portable audio players with the follow- ing specifications ® ● Bluetooth specifications: Ver. 2.0, or higher (Recommended: Ver. 3.0+EDR or higher) ● Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher (Recommended: Ver.
Page 418 ® 5-10. Bluetooth ■ Reconnecting the portable audio player If the portable audio player is disconnected due to poor reception when the engine switch is in the “ACC” or “ON” position (vehicles without a smart key system), or ACCESSORY or IGNITION ON mode (vehicles with a smart key system), the system automatically reconnects the portable audio player.
Page 419 ® 5-10. Bluetooth NOTICE ■ When leaving the vehicle Do not leave your portable audio player or cellular phone in the vehicle. The inside of the vehicle may become hot, causing damage to the portable audio player or cellular phone.
Page 420: Voice Command System
5-11. Using the voice command system Voice command system The voice command system enables the hands-free system to be operated using voice commands. Operations of the voice command system can be performed by selecting the menu corresponding to each function on the screen.
Page 421 5-11. Using the voice command system ■ Microphone →P. 387 ■ When using the microphone ● It is unnecessary to speak directly into the microphone when giving a com- mand. ● Voice commands may not be recognized if: • Spoken too quickly. •...
Page 422: Command List
5-11. Using the voice command system Command list Some recognizable voice commands and their actions are shown below as examples. Basic  Command Action Prompts voice guidance to offer examples of com- “Help” mands or operation methods “Go Back” Returns to the previous screen Phone ...
Page 423 5-11. Using the voice command system Mobile Assistant ® The Mobile Assistant feature will activate Apple’s Siri Eyes Free mode via the steering wheel switches. To operate the Mobile Assis- tant, a compatible cellular phone must be registered and connected to ®...
Page 424 5-11. Using the voice command system ■ Notes about Mobile Assistant ● The available features and functions may vary based on the iOS version installed on the connected device. ® ● Some Siri features are limited in Eyes Free mode. If you attempt to use an ®...
Page 425: Interior Features
Interior features 6-1. Using the air conditioning 6-3. Using the storage features system List of storage features ..444 Manual air conditioning • Glove box...... 445 system......426 • Front console box ..446 • Overhead console..446 Automatic air conditioning •...
Page 426: Manual Air Conditioning System
6-1. Using the air conditioning system ∗ Manual air conditioning system Air conditioning controls Adjusting the temperature setting ■ To adjust the temperature set- ting, turn the temperature con- trol dial clockwise (warm) or counterclockwise (cool). is not pressed, the sys- tem will blow ambient tempera- ture air or heated air.
Page 427 6-1. Using the air conditioning system Fan speed setting ■ To adjust the fan speed, turn the fan speed control dial clock- wise (increase) or counterclock- wise (decrease). Turning the dial to “OFF” turns off the fan. Change the airflow mode ■...
Page 428 6-1. Using the air conditioning system Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (introduces air from outside the vehicle) (indicator off) and recirculated air mode (recy- cles air inside the vehicle) (indicator on) each time the button is pressed.
Page 429 6-1. Using the air conditioning system Air outlets Location of air outlets ■ Air outlets and air volume changes according selected airflow mode. : Double Cab models only Adjusting the position and opening and closing the air outlets ■ Direct air flow to the left or right, up or down.
Page 430 6-1. Using the air conditioning system ■ Fogging up of the windows ● The windows will easily fog up when the humidity in the vehicle is high. Turning on will dehumidify the air from the outlets and defog the wind- shield effectively.
Page 431 6-1. Using the air conditioning system WARNING ■ To prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the wind- shield can cause the outer surface of the windshield to fog up, blocking your vision.
Page 432: Automatic Air Conditioning System
6-1. Using the air conditioning system ∗ Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls Adjusting the temperature setting ■ To adjust the temperature set- ting, turn the temperature con- trol dial clockwise (warm) or counterclockwise (cool).
Page 433 6-1. Using the air conditioning system Fan speed setting ■ To adjust the fan speed, turn the fan speed control dial clock- wise (increase) or counterclock- wise (decrease). Press to turn the fan off. Change the airflow mode ■ To change the airflow, press outlets used switched each time the button is...
Page 434 6-1. Using the air conditioning system Using by automatic mode Press Adjust the temperature setting. To stop the operation, press Automatic mode indicator ■ If the fan speed setting or air flow modes are operated, the auto- matic mode indicator goes off. However, automatic mode for func- tions other than that operated is maintained.
Page 435: Other Functions
6-1. Using the air conditioning system Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (introduces air from outside the vehicle) (indicator off) and recirculated air mode (recy- cles air inside the vehicle) (indicator on) each time the button is pressed.
Page 436 6-1. Using the air conditioning system Air outlets Location of air outlets ■ Air outlets and air volume changes according selected airflow mode. : Double Cab models only Adjusting the position of and opening and closing the air out- ■ lets Direct air flow to the left or right, up or down.
Page 437 6-1. Using the air conditioning system ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
Page 438 6-1. Using the air conditioning system ■ Ventilation and air conditioning odors ● To let fresh air in, set the air conditioning system to the outside air mode. ● During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system.
Page 439: Seat Heaters
6-1. Using the air conditioning system ∗ Seat heaters WARNING ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically chal- lenged •...
Page 440 6-1. Using the air conditioning system Turns the seat heaters on Drivers side Front passenger side Each time the switch is pressed, the operation condition changes as follows. Hi (3 segments lit) → Mid (2 seg- ments lit) → Lo (1 segment lit) → The level indicator (amber) light up during operation.
Page 441: Using The Interior Lights
6-2. Using the interior lights Interior lights list Front interior light/personal Engine switch light (vehicles lights 　　　　　 (→P. 442) with a smart key system) Rear interior light (→P. 442) Center tray light Engine switch light (vehicles Cargo lamp (if equipped) with a wireless remote control (→P.
Page 442: Interior Light
6-2. Using the interior lights Interior light Front ■ Door position personal/interior lights come on when a door is opened. They turn off when the doors are closed. Rear ■ Door position personal/interior lights come on when a door is opened.
Page 443: Cargo Lamp Main Switch
20 min- utes: ● Front personal lights ● Interior lights ● Cargo lamp (if equipped) ■ Customization that can be configured at Toyota dealer Settings (e.g. the time elapsed before lights turn off) can be changed. (Customizable features: →P. 649)
Page 444: 6-3. Using The Storage Features
6-3. Using the storage features List of storage features Bottle holders (→P. 448) Glove box (→P. 445) Front console box (→P. 446) Cup holders (→P. 447) Overhead console Storage boxes (→P. 449) (if equipped) (→P. 446)
Page 445: Glove Box
6-3. Using the storage features WARNING ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may result in the following when cabin temperature becomes high: ●...
Page 446: Front Console Box
6-3. Using the storage features Front console box Lift the lid while pulling up the knob to release the lock. ■ Passing a cable from the console box Overhead console (if equipped) The overhead console is useful for temporarily storing sunglasses and similar small items.
Page 447: Cup Holders
6-3. Using the storage features Cup holders Vehicles with an automatic transmission  Vehicles with a manual transmission  WARNING ■ Items unsuitable for the cup holder Do not place anything other than cups or beverage cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 448: Bottle Holders
6-3. Using the storage features Bottle holders Front door  Front console box  Rear door (Double Cab models only)  ■ When using the holder as a bottle holder ● When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape.
Page 449: Storage Box
6-3. Using the storage features WARNING ■ Items unsuitable for the bottle holders Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 450 6-3. Using the storage features Turn the knob counterclock- wise. Open the lid. Under the rear seats (Double Cab models)  Swing the bottom cushion up by pulling the lock release strap. Turn the knob counterclockwise and open the lid.
Page 451 6-3. Using the storage features WARNING ■ Caution while driving Keep the storage boxes closed and locked. Injuries may result in the event of an accident or sudden braking. ■ Storage box (Access cab models [vehicles without rear seat]) Never let anyone sit on the storage box. Doing so may damage the storage box and cause injury.
Page 452: Luggage Compartment Features
6-3. Using the storage features Luggage compartment features Deck ■ Left side Right side   Deck hooks (→P. 455) Power outlet (if equipped) (→P. 465) Auxiliary boxes (→P. 453) Tie-down cleats (→P. 453) Tonneau cover (if equipped) ■ →P. 456 Behind the rear seat (Double Cab models only) ■...
Page 453 6-3. Using the storage features Deck Auxiliary boxes ■ Turn the knob and open the lid. Tie-down cleats ■ The deck rail system enables you to insert and move tie-down cleats to their best location along deck rails to secure a load. Locking plate Thumb wheel Tie-down cleat...
Page 454 6-3. Using the storage features ● Installing the tie-down cleat Loosen the thumb wheel in a counterclockwise motion, and depress the wheel so that the locking plate main- tains 0.5 in. (12.7 mm) gap. Deck rail 0.5 in. (12.7 mm) Detent Locking plate Insert the locking plate into...
Page 455 6-3. Using the storage features Check the tie-down cleat to confirm that it is locked into a detent and securely mounted to the deck rail system. Deck hooks ■ Deck hooks are provided for securing loose items.
Page 456 6-3. Using the storage features Tonneau cover (if equipped) Open the tonneau cover ■ Open the tailgate. (→P. 118) Pull the lever and lift to open the rear tonneau cover. Pull the lever and lift to open the center tonneau cover. Secure by using the storage straps.
Page 457 6-3. Using the storage features Close the tonneau cover ■ Remove the straps while pushing the release lock. Confirm that there is no tie-down cleat in the latch position before closing the tonneau cover. Close the tonneau cover and push down on the top sur- face (latch position) until it clicks.
Page 458 6-3. Using the storage features When installing, reverse the steps listed. Push down on the top surface (latch position) until it clicks, tighten the bolt, and then close the cap. After closing the tonneau cover, try pulling it up towards you to make sure all latches are securely locked.
Page 459 6-3. Using the storage features WARNING ■ Caution for the tonneau cover Observe the following precautions regarding the tonneau cover. Failure to do so may cause death or serious injury. ● Confirm the tonneau cover is securely closed before driving. ●...
Page 460: Grocery Bag Hooks
6-3. Using the storage features NOTICE ■ When using the tonneau cover ● Deck area is not waterproof, so take care when transporting items which may be damaged by water. ● Do not drive the vehicle with objects on top of the tonneau cover. ●...
Page 461 6-3. Using the storage features Storage boxes ■ Storage box is designed to place things like bottles. Left side Right side (vehicles without a   sub woofer) NOTICE ■ Grocery bag hook weight capacity Do not hang any object heavier than 7 lb. (3 kg) on the grocery bag hooks.
Page 462: 6-4. Other Interior Features
6-4. Other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it backward.
Page 463: Clock
6-4. Other interior features Clock The clock is displayed on the screen. Setting the clock ■ Vehicles with Entune Audio (Audio system types: →P. 336)  →P. 347 Vehicles with Entune Audio Plus or Entune Premium Audio  (Audio system types: →P. 336) Refer “NAVIGATION AND MULTIMEDIA...
Page 464: Power Outlets (12 V Dc)
6-4. Other interior features Power outlets (12 V DC) Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). When using electronic goods, make sure that the power consumption of all the connected power outlets are less than 120 W.
Page 465: Power Outlet (120 V Ac)
6-4. Other interior features ■ The power outlets can be used when Vehicles without a smart key system  The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system  The engine switch is in ACCESSORY or IGNITION ON mode. NOTICE ●...
Page 466 6-4. Other interior features Maximum available capacity of the power outlet ■ ● While the vehicle is being driven The maximum capacity of the power outlet is always 120 V AC/ 100 W. ● When the vehicle is stationary The maximum capacity of the power outlet varies depending on the following conditions: •...
Page 467 When the cabin temperature is high, open the windows to cool the tempera- ture down. Once it reaches the normal temperature, turn the power outlet main switch on again. If the power supply does not resume even after the above procedure has been performed, have the vehicle inspected by your Toyota dealer.
Page 468 Do not modify, disassemble or repair the power outlet or its inverter in any way. Doing so may result in unexpected malfunctions or accidents, which could cause serious damage or injuries. Contact your Toyota dealer for any necessary repairs. ■...
Page 469 ■ If the power outlet is loose when an electrical appliance plug is con- nected Replace the outlet. Contact your Toyota dealer for any necessary replace- ments. ■ If the power outlet gets dirty Turn the main switch off and use a soft, clean cloth to wipe it gently.
Page 470: Wireless Charger
6-4. Other interior features Wireless charger (if equipped) A mobile device can be charged wirelessly on the tray. Vehicles without a smart key system  Charging can only be performed with the engine switch in the “ACC” or “ON” position and only on mobile devices with the “ ”...
Page 471 6-4. Other interior features Place a mobile device on the tray as shown in the illustration. An amber indicator is illuminated while charging is in progress. When charging is complete, a green indicator will also be illumi- nated. Some phones, cases or cover type wireless chargers may not cause the green indicator to illuminate even though it is fully...
Page 472 If the LED indicators flash even though the surface of the tray is not hot, the wireless charger may be malfunctioning. Consult your Toyota dealer. ■ When charging of the wireless charger stops temporarily If any of the following operations are performed with the wireless key or elec- tronic key present, charging may stop temporarily.
Page 473 6-4. Other interior features...
Page 474 6-4. Other interior features WARNING ■ Caution regarding interference with electronic devices ● People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should main- tain a reasonable distance between themselves and the wireless charger. The radio waves may affect the operation of such devices. ●...
Page 475 If in situations other than above the wireless charger does not operate prop- erly or the operation indicator light is blinking, the wireless charger may be malfunctioning. Contact your Toyota dealer. ■ To prevent failure or damage to data ●...
Page 476: Assist Grips
6-4. Other interior features Assist grips An assist grip (type A) installed on the pillar can be used when getting in or out of the vehicle and others. An assist grip (type B) installed on the ceiling can be used to support your body while sitting on the seat.
Page 477: Camera Mounting Bracket
6-4. Other interior features Camera mounting bracket Windshield is equipped with a dedicated mounting bracket for ® use with the GoPro QRB (Quick Release Buckle) and must be ® connected directly to the GoPro camera housing. ■ Before using ® Comply with state and local regulations while operating the GoPro camera.
Page 478: Garage Door Opener
6-4. Other interior features ∗ Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices. HomeLink ® ® The HomeLink wireless control system in your vehicle has 3 buttons which can be programmed to operate 3 different devices.
Page 479 6-4. Other interior features ® Programming the HomeLink ■ Steps through must be performed within 60 seconds, other- wise the indicator light will stop flashing and programming will not be able to be completed. ® Press and release the HomeLink button you want to program ®...
Page 480 6-4. Other interior features ® Test the HomeLink operation by pressing the newly pro- grammed button and observing the indicator light: ● Indicator light illuminates: Programming of a fixed code device has completed. The garage door or other device should oper- ®...
Page 481 6-4. Other interior features Press and hold the desired ® HomeLink button (inside the vehicle) for 2 seconds and release Repeat this sequence (press/hold/ release) up to 3 times to complete programming. If the garage door opener motor operates when the ®...
Page 482 6-4. Other interior features ® Reprogramming a single HomeLink button ■ When the following procedure is performed, buttons which already have devices registered to them can be overwritten: ® With one hand, press and hold the desired HomeLink button. ® When the HomeLink indicator starts flashing orange, release ®...
Page 483 6-4. Other interior features ® Erasing the entire HomeLink memory (all three codes) Press and hold the 2 outside but- tons for 10 seconds until the ® HomeLink indicator light changes from continuously lit orange to rapidly flashing green. If you sell your vehicle, be sure to erase the programs stored in the ®...
Page 484 ■ When support is necessary Visit on the web at www.homelink.com/toyota or call 1-800-355-3515. ® ■ About HomeLink HomeLink and the HomeLink house icon are registered trademarks of Gen- tex Corporation.
Page 485: Compass
6-4. Other interior features ∗ Compass The compass on the inside rear view mirror indicates the direc- tion in which the vehicle is heading. Operation To turn the compass on or off, press the button for more than 3 sec- onds.
Page 486 6-4. Other interior features Calibrating the compass Samoa: 5 Guam: 8 Saipan: 8 The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
Page 487 6-4. Other interior features Circling calibration ■ Stop the vehicle in a place where it is safe to drive in a circle. Press and hold the button for 9 seconds. “C” appears on the compass display. Type A Type B ...
Page 488 6-4. Other interior features WARNING ■ While driving the vehicle Do not adjust the display. Adjust the display only when the vehicle is stopped. ■ When doing the circling calibration Secure a wide space, and watch out for people and vehicles in the vicinity. Do not violate any local traffic rules while performing circling calibration.
Page 489: Maintenance And Care
Maintenance and care 7-1. Maintenance and care 7-3. Do-it-yourself maintenance Cleaning and protecting Do-it-yourself service the vehicle exterior..490 precautions ..... 503 Cleaning and protecting Hood ......... 505 the vehicle interior... 494 Engine compartment..507 7-2. Maintenance Tires ........519 Maintenance Tire inflation pressure ..
Page 490: Maintenance And Care Cleaning And Protecting
7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 491 7-1. Maintenance and care ■ Aluminum wheels (if equipped) ● Remove any dirt immediately by using a neutral detergent. ● Wash detergent off with water immediately after use. ● To protect the paint from damage, make sure to observe the following pre- cautions.
Page 492 7-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels, etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
Page 493 7-1. Maintenance and care NOTICE ■ Cleaning the exterior lights ● Wash carefully. Do not use organic substances or scrub with a hard brush. This may damage the surfaces of the lights. ● Do not apply wax to the surfaces of the lights. Wax may cause damage to the lenses.
Page 494: Cleaning And Protecting The Vehicle Interior
7-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ● Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
Page 495 7-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 496 Water may also cause the body to rust. ■ When cleaning the inside of the windshield (vehicles with Toyota Safety Sense P) Do not allow glass cleaner to contact the lens. Also, do not touch the lens.
Page 497: Maintenance
■ Repair and replacement It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war-...
Page 498 Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
Page 499: General Maintenance
“Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement/Sched- uled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment...
Page 500: Vehicle Interior
7-2. Maintenance Vehicle interior Items Check points • The accelerator pedal should move smoothly Accelerator pedal (without uneven pedal effort or catching). Automatic transmission • When parked on a slope and the shift lever is “Park” mechanism in P, is the vehicle securely stopped? •...
Page 501: Vehicle Exterior
7-2. Maintenance Vehicle exterior Items Check points Doors • Do the doors operate smoothly? • Does the engine hood lock system work prop- Engine hood erly? • There should not be any signs of fluid leakage Fluid leaks after the vehicle has been parked. •...
Page 502: Emission Inspection And Maintenance (I/M) Programs
The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test in the following situations: ●...
Page 503: 7-3. Do-It-Yourself Maintenance
• Rag or paper towel (→P. 513) • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- life hybrid organic acid technology For the U.S.A.:...
Page 504: 7-3. Do-It-Yourself Maintenance
7-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing and tools away from the moving fan and engine drive belt.
Page 505: Hood
7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. Hold the hood open by inserting the supporting rod into the slot.
Page 506 7-3. Do-it-yourself maintenance WARNING ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 507: Engine Compartment
7-3. Do-it-yourself maintenance Engine compartment 2TR-FE engine  Washer fluid tank (→P. 518) Engine oil level dipstick (→P. 509) Radiator cap Brake fluid reservoir Engine coolant reservoir (→P. 513) (→P. 511) Fuse box (→P. 540) Engine oil filler cap (→P. 510) Battery (→P.
Page 508 7-3. Do-it-yourself maintenance 2GR-FKS engine  Washer fluid tank (→P. 518) Engine oil filler cap (→P. 510) Power steering fluid reservoir Brake fluid reservoir (→P. 514) (→P. 513) Radiator cap Fuse box (→P. 540) Engine oil level dipstick Battery (→P. 516) (→P.
Page 509 7-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 510 7-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. 2TR-FE engine 2GR-FKS engine   Make sure to check the oil type and prepare the items needed before adding oil.
Page 511: Engine Coolant
Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. ●...
Page 512 If the coolant level drops within a short time of replenishing Visually check the radiator, hoses, engine coolant reservoir cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. WARNING ■...
Page 513 Radiator and condenser Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING ■...
Page 514 7-3. Do-it-yourself maintenance ■ Brake fluid can absorb moisture from the air Excess moisture in the brake fluid can cause a dangerous loss of braking effi- ciency. Use only newly opened brake fluid. WARNING ■ When filling the reservoir Take care as brake fluid can harm your hands and eyes and damage painted surfaces.
Page 515 7-3. Do-it-yourself maintenance 2GR-FKS engine  Full (when cold) Add fluid (when cold) Full (when hot) Add fluid (when hot) Hot: Vehicle has been driven around 50 mph (80 km/h) for 20 minutes, or slightly longer in frigid temperatures. (Fluid temperature, 140°F - 175°F [60°C - 80°C]) Cold: Engine has not been run for about 5 hours.
Page 516 Make sure to turn off the engine before disconnect the battery. Take extra care when connecting the battery if the engine switch mode prior to discharge is unknown. If the system will not start even after multiple attempts, contact your Toyota dealer.
Page 517 7-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near battery: ●...
Page 518: Washer Fluid
7-3. Do-it-yourself maintenance Washer fluid Add washer fluid in the following situations: ● A washer does not work. ● The low washer fluid warning light comes on or warning mes- sage appears on the display (for Canada only). WARNING ■ When adding washer fluid Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine, etc.
Page 519: Tires
Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the same interval as tire inspection. Front Do not fail to initialize the tire pressure warning system after tire rotation.
Page 520 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (→P. 522) ◆ Initializing the tire pressure warning system The tire pressure warning system must be initialized in the fol- ■...
Page 521 7-3. Do-it-yourself maintenance How to initialize the tire pressure warning system ■ Vehicles without a smart key system: Park the vehicle in a safe place and turn the engine switch to the “LOCK” position. Vehicles with a smart key system: Park the vehicle in a safe place and turn the engine switch off.
Page 522 A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels (vehicles with the tire pressure warning...
Page 523 7-3. Do-it-yourself maintenance ■ Maximum load of tire Check that the number given by dividing the maximum load by 1.10 of the replacement tire is greater than 1/2 of the Gross Axle Weight Ratings (GAWR) of either the front axle or the rear axle, whichever is greater. For the GAWR, see the Certification Access Cab models ...
Page 524 ● In the following cases, the tire pressure warning system may not operate properly. • If non-genuine Toyota wheels are used. • A tire has been replaced with a tire that is not an OE (Original Equip- ment) tire. • A tire has been replaced with a tire that is not of the specified size.
Page 525 3 times. ● After performing initialization, the tire pressure warning light blinks for 1 minute then stays on while driving. If the inflation pressure of each tire is still not displayed, have the vehicle inspected by your Toyota dealer.
Page 526 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 527 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 528: Tire Inflation Pressure
7-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure The recommended cold tire inflation pressure and tire size are dis- played on the tire and loading information label. (→P. 633) Access Cab models Double Cab models  ...
Page 529 ● Reduced fuel economy ● Reduced driving comfort and poor handling ● Reduced tire life due to wear ● Reduced safety ● Damage to the drive train If a tire needs frequent inflating, have it checked by your Toyota dealer.
Page 530 7-3. Do-it-yourself maintenance ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ● Check only when the tires are cold. If your vehicle has been parked for at least 3 hours or has not been driven for more than 1 mile or 1.5 km, you will get an accurate cold tire inflation pressure reading.
Page 531: Wheels
● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions (if equipped) ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 532 7-3. Do-it-yourself maintenance ■ When replacing wheels (vehicles with the tire pressure warning sys- tem) The wheels of your vehicle are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advance warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, tire pressure warning valves and trans- mitters must be installed.
Page 533 Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 534: Air Conditioning Filter
7-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Vehicles without a smart key system: Turn the engine switch to the “LOCK” position. Vehicles with a smart key system: Turn the engine switch off.
Page 535 7-3. Do-it-yourself maintenance Remove the filter cover. Pull the filter out of the filter out- let. Replacement method Remove the air conditioning filter and replace it with a new one. When installing the filter, follow the instructions indicated on the label. ■...
Page 536 7-3. Do-it-yourself maintenance NOTICE ■ When using the air conditioning system Make sure that a filter is always installed. Using the air conditioning system without a filter may cause damage to the system.
Page 537: Wireless Remote Control/ Electronic Key Battery
7-3. Do-it-yourself maintenance Wireless remote control/electronic key bat- ∗ tery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery CR2016 (vehicles without a smart key system), or CR2032 (vehicles with a smart key system) Replacing the battery Vehicles without a smart key system...
Page 538 7-3. Do-it-yourself maintenance Open the case cover using a coin protected with tape, etc., and remove the depleted bat- tery using a small flathead screwdriver. Insert a new battery with the “+” terminal facing up. Vehicles with a smart key system ...
Page 539 Use a CR2016 (vehicles without a smart key system) or CR2032 (vehicles with a smart key system) lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manu- facturer.
Page 540: Checking And Replacing Fuses
7-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Vehicles without a smart key system: Turn the engine switch to the “LOCK” position. Vehicles with a smart key system: Turn the engine switch off.
Page 541 Type A and B: Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box cover. Type C: Contact your Toyota dealer. Type A Type B ...
Page 542 If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (→P. 543) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. ■ If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage.
Page 543: Light Bulbs
Light bulbs You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 544 7-3. Do-it-yourself maintenance Rear ■ Tail/rear turn signal/rear side marker lights Stop/tail/rear side marker lights Back up lights License plate lights High mounted stoplight (vehicles without a cargo lamp)
Page 545 7-3. Do-it-yourself maintenance Replacing light bulbs Headlight low beam ■ Unplug the connector while pressing the lock release. Turn the bulb base counter- clockwise. Set the new light bulb. Align the 3 tabs on the light bulb with the mounting and insert. Turn it clockwise to set.
Page 546 7-3. Do-it-yourself maintenance Headlight high beam ■ Unplug the connector while pressing the lock release. Turn the bulb base counter- clockwise. Set the new light bulb. Align the 3 tabs on the light bulb with the mounting and insert. Turn it clockwise to set. Install the connector.
Page 547 7-3. Do-it-yourself maintenance Front side marker lights ■ To allow enough working space, turn steering wheel to the opposite side of the bulb to be replaced. Remove the fender liner clip and screw. Turn the steering wheel to the left when replacing the right side light bulb, and turn the steering wheel to the right when replac- ing the left side light bulb.
Page 548 7-3. Do-it-yourself maintenance Remove the light bulb. Reinstall the fender liner and install the clip and screw. Front turn signal lights/parking lights (bulb type)/daytime run- ■ ning lights (bulb type) Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 549 7-3. Do-it-yourself maintenance Front fog lights (if equipped) ■ To allow enough working space, turn steering wheel to the opposite side of the bulb to be replaced. Remove the fender liner clip and screw. Turn the steering wheel to the left when replacing the right side light bulb, and turn the steering wheel to the right when replac-...
Page 550 7-3. Do-it-yourself maintenance Turn the bulb counterclock- wise. Set the new light bulb. Align the 3 tabs on the light bulb with the mounting, and insert. Turn it clockwise to set. Install the connector. Shake the bulb base gently to check that it is not loose, turn the fog lights, on once and visu- ally confirm that no light is leak-...
Page 551 7-3. Do-it-yourself maintenance Tail/rear turn signal/rear side marker lights, stop/tail/rear side ■ marker lights and back-up lights Remove the bolts and rear combination assembly. Turn the bulb bases counter- clockwise. Tail/rear turn signal/rear side marker lights Stop/tail/rear side marker lights Back-up lights Remove the light bulb.
Page 552 7-3. Do-it-yourself maintenance License plate lights ■ Turn the bulb base counter- clockwise. Remove the light bulb. When installing, reverse the steps listed.
Page 553 Replacing the following bulbs ■ If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. ● Parking lights (LED type) ● Daytime running lights (LED type) ● High mounted stoplight (vehicles with cargo lamp)
Page 554 Visible pools of water or large droplets are a sign of a lamp in which the seal has malfunctioned. If this is the case or condensation and fogging remain after long periods of time, contact your Toyota dealer for more information.
Page 555: When Trouble Arises
When trouble arises 8-1. Essential information 8-2. Steps to take in an emergency Emergency flashers ..556 If your vehicle needs to be towed ......559 If your vehicle has to If you think something is be stopped in wrong ......564 an emergency ....
Page 556: Emergency Flashers
8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 557: If Your Vehicle Has To Be Stopped In An Emergency
8-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
Page 558 8-1. Essential information WARNING ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine.
Page 559: Steps To Take In An Emergency
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
Page 560 8-2. Steps to take in an emergency From the rear  Use a towing dolly under the front wheels. Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. Type A Type B ...
Page 561: Emergency Towing
8-2. Steps to take in an emergency Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using cables or chains secured to the emergency towing hook(s). This should only be attempted on hard surfaced roads for at most 50 miles (80 km) at under 18 mph (30 km/h).
Page 562 8-2. Steps to take in an emergency WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When towing the vehicle 2WD models: Be sure to transport the vehicle with all four wheels raised off the ground.
Page 563 8-2. Steps to take in an emergency NOTICE ■ To prevent damage to the vehicle when towing using a wheel-lift type truck ● Vehicles without a smart key system: Do not tow the vehicle from the rear when the engine switch is in the “LOCK”...
Page 564: If You Think Something Is Wrong
8-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle.
Page 565: Fuel Pump Shut Off System
8-2. Steps to take in an emergency Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 566: If A Warning Light Turns On Or A Warning Buzzer Sounds
• The emission control system; • The electronic engine control system; (U.S.A.) • The electronic throttle control system; or • The electronic automatic transmission control system. → Have the vehicle inspected by your Toyota dealer (Canada) immediately. SRS warning light Indicates a malfunction in: •...
Page 567 • The active traction control system (if equipped); • The AUTO LSD system; or • The Crawl Control system (if equipped) → Have the vehicle inspected by your Toyota dealer immediately. Rear differential lock indicator light Indicates a malfunction in the rear differential lock system →...
Page 568 Toyota dealer. When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system. → Have the system checked by your Toyota dealer. PCS warning light Indicates a malfunction in the PCS (Pre-Collision System)
Page 569 8-2. Steps to take in an emergency : Driver’s seat belt buzzer: The driver’s seat belt buzzer sounds to alert the driver that his or her seat belt is not fastened. Once the engine switch is turned to the “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system), the buzzer sounds for 6 seconds.
Page 570 Is the fuel tank cap loose? If it is, tighten it securely. The light will go off after several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. ■...
Page 571 ■ If both the ABS and the brake system warning lights remain on Stop your vehicle in a safe place immediately and contact your Toyota dealer. The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury.
Page 572 8-2. Steps to take in an emergency WARNING Please note that the TPMS (tire pressure warning system) is not a sub- stitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale (tire pressure warning light).
Page 573: If A Warning Message Is Displayed
Multi-information display If any of the warning light comes on again after the following actions have been performed, contact your Toyota dealer. Warning message and warning buzzer list Warning message Details/Actions Indicates the following: (U.S.A.)
Page 574 → Immediately stop the vehicle in a safe place and contact your Toyota dealer. Indicates a malfunction in the vehicle’s charging system. → Immediately stop the vehicle in a safe place and contact your Toyota dealer. Continuing to drive the vehicle may be dangerous.
Page 575 Warning message Details/Actions Indicates a malfunction in: (U.S.A.) • The ABS; or • The brake assist system A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer. (Canada) (U.S.A.) (Canada) Indicates a malfunction in: • The VSC system;...
Page 576 Press the “ON-OFF” button once to deactivate the system, and then press the button again to reactivate the system. A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer. (If equipped) Indicates a malfunction in the dynamic radar cruise control system.
Page 577 8-2. Steps to take in an emergency Warning message Details/Actions Indicates that the accelerator and brake pedals are being depressed simultaneously, and the → P. 162) Brake Override System is operating. ( → Release the accelerator pedal and depress the brake pedal. (Flashes) Indicates that the tire inflation pressure is low.
Page 578 “2WD” (→P. 299) and drop your speed or stop the vehicle until the message and light go off. If the message and light do not go off, contact your Toyota dealer. (Flashes) (4WD models only) Indicates that the Crawl Control is canceled while in use.
Page 579 → Close the hood. (If equipped) Indicates a malfunction in the intuitive parking assist. The malfunctioning assist-sensor is flashing. → Have the vehicle inspected by your Toyota dealer immediately. (If equipped) Indicates that intuitive parking assist is dirty or covered with ice.
Page 580 → Release the parking brake. (U.S.A.) (Canada) Indicates a malfunction in the smart key system. A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer. (Flashes) (If equipped) Indicates that a Blind Spot Monitor sensor or the surrounding area on the bumper is dirty or cov- ered with ice.
Page 581 8-2. Steps to take in an emergency Warning message Details/Actions Indicates that the engine switch is turned to the “LOCK” or “ACC” position (vehicles without a smart key system), or off or ACCESSORY mode (vehicles with a smart key system) and the driver’s door is opened while the lights are turned →...
Page 582 8-2. Steps to take in an emergency Warning message Details/Actions Indicates that all maintenance according to the driven distance on the maintenance schedule should be performed soon. Comes on approximately 4500 miles (7200 km) after the message has been reset. →...
Page 583 A buzzer also sounds. → Slow the vehicle by applying the brakes. (If equipped) Indicates a malfunction in the LDA (Lane Depar- ture Alert). A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer. (Yellow) (If equipped)
Page 584 8-2. Steps to take in an emergency Warning message Details/Actions Indicates that the LDA (Lane Departure Alert) system cannot be used as the vehicle speed is lower than approximately 32 mph (50 km/h). → Drive the vehicle at approximately 32 mph (50 km/h) or more.
Page 585 (Yellow) (If equipped) Indicates a malfunction in the PCS (Pre-Collision System). A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer. (Flashes) (If equipped) Indicates that, since the VSC (Vehicle Stability Control) system was turned off, the pre-collision brake system operation is stopped.
Page 586 Indicates a malfunction in: • The automatic headlight leveling system; or • The Automatic High Beam system. A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer. (If equipped) Indicates that the Automatic High Beam switch is pressed while the headlights are in low beam.
Page 587 (If equipped) Indicates a malfunction in the Drive-Start Control. A buzzer also sounds. → Have the vehicle inspected by your Toyota dealer immediately. Indicates that the shift position was changed and Drive-Start Control was operated while depress- ing the accelerator pedal.
Page 588 8-2. Steps to take in an emergency Have the malfunction repaired immediately. (vehicles with a smart key system) After taking the specified steps to correct the suspected problem, check that the warning message and light go off. Interior Exterior Warning message Details/Actions buzzer buzzer...
Page 589 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer The driver’s door was opened and closed while the elec- tronic key was not in the vehi- cle, the shift lever was in P and the engine switch was not turned off.
Page 590 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer The electronic key is not detected when an attempt is ⎯ Once made to start the engine. → Start the engine with the electronic key present. (Flashes) An attempt was made to drive when the electronic key was...
Page 591 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer The electronic key has a low battery. ⎯ Once → Replace electronic key battery. (→P. 537) The steering lock could not be released within 3 seconds of engine switch being...
Page 592 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer Indicates that: • With the engine switch off, the doors were unlocked and then the driver’s door was opened and closed • The engine switch ⎯ Once turned ACCESSORY...
Page 593 8-2. Steps to take in an emergency Interior Exterior Warning message Details/Actions buzzer buzzer During a engine starting pro- cedure in the event that the electronic key was not func- tioning properly (→P. 611), the ⎯ Once engine switch was touched with the electronic key.
Page 594: If You Have A Flat Tire
8-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: →P. 519 WARNING ■ If you have a flat tire Do not continue driving with a flat tire.
Page 595 8-2. Steps to take in an emergency Location of the spare tire, jack and tools Spare tire ■ Jack and tools ■ Tool bag Jack Access Cab models Double Cab models  ...
Page 596 8-2. Steps to take in an emergency WARNING ■ Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
Page 597 8-2. Steps to take in an emergency Taking out the jack and tool bag (Access Cab models) Vehicles with rear seats: Pull up the lever and raise the bottom cushion up. Turn the knob counterclock- wise. Open the lid. Unhook the rubber band and remove the tool bag.
Page 598 8-2. Steps to take in an emergency Unhook the rubber band and take out the jack. For loosening For tightening Taking out the jack and tool bag (Double Cab models) Swing the bottom cushion up by pulling the lock release strap. Turn the knob counterclockwise and open the lid.
Page 599 8-2. Steps to take in an emergency Unhook the rubber band and take out the jack. For loosening For tightening Taking out the spare tire Assemble jack handle extension as shown. Insert the end of the jack han- dle extension into the lowering screw and turn it counterclock- wise.
Page 600 8-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
Page 601 8-2. Steps to take in an emergency Position the jack at the correct jack point as shown. Front Rear Make sure the jack is positioned on a level and solid place. Front Raise the vehicle until the tire is slightly raised off the ground. When positioning the jack under the rear axle housing, make sure the groove on the top of the jack...
Page 602 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • Do not attach a heavily damaged wheel ornament, as it may fly off the wheel while the vehicle is moving.
Page 603 8-2. Steps to take in an emergency Install the spare tire and loosely tighten each wheel nut by hand by approximately the same amount. Replacing a steel wheel with a spare steel wheel  Tighten the nuts until the tapered Tapered portion portion comes into loose contact with the disc wheel sheet.
Page 604 8-2. Steps to take in an emergency Lower the vehicle. Firmly tighten each nut two or three times in the order shown in the illustration. Tightening torque: 83 ft·lbf (113 N·m, 11.5 kgf·m) WARNING Stowing the flat tire ■ Failure to follow steps listed under stowing the tire may result in damage to the spare tire carrier and loss of the tire, which could result in death or serious injury.
Page 605 8-2. Steps to take in an emergency Stowing the flat tire, jack and all tools Remove the center wheel ornament by pushing from the reverse side. Lay down the tire with the valve stem facing up and install the holding bracket, inserting the claw into the wheel lug nut hole.
Page 606 8-2. Steps to take in an emergency ■ The temporary spare tire ● The temporary spare tire is identified by the label “TEMPORARY USE ONLY” on the disc wheel. Use the temporary spare tire temporarily, and only in an emergency. ●...
Page 607 8-2. Steps to take in an emergency WARNING ■ When using the temporary spare tire ● Remember that the temporary spare tire provided is specifically designed for use with your vehicle. Do not use your temporary spare tire on another vehicle. ●...
Page 608 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and...
Page 609: If The Engine Will Not Start
8-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce- dures are being followed (→P. 193, 196), consider each of the fol- lowing points. The engine will not start even though the starter motor operates normally.
Page 610 ● There may be a malfunction in the steering lock system (vehicles with a smart key system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with a smart key system)
Page 611: If The Electronic Key Does Not Operate Properly (Vehicles With A Smart Key System)
Press the engine switch. In the event that the engine still cannot be started, contact your Toyota dealer.
Page 612 8-2. Steps to take in an emergency ■ Stopping the engine Shift the shift lever to P and press the engine switch as you normally do when stopping the engine. ■ Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted.
Page 613: If The Vehicle Battery Is Discharged
The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
Page 614 (vehicles with a smart key system). Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order from which they were connected. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible.
Page 615 8-2. Steps to take in an emergency ■ Starting the engine when the battery is discharged (vehicles with an automatic transmission) The engine cannot be started by push-starting. ■ To prevent battery discharge ● Turn off the headlights and the audio system while the engine is off. ●...
Page 616 8-2. Steps to take in an emergency WARNING ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery: ● Make sure each jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any other than the intended terminal.
Page 617: If Your Vehicle Overheats
(radia- tor) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact your Toyota dealer. The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir.
Page 618 Start the engine to check that the radiator cooling fan operates and to check for coolant leaks from the radiator or hoses. If the fan is not operating: Stop the engine immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer.
Page 619: If The Vehicle Becomes Stuck
8-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Set the parking brake and shift the shift lever to P (automatic transmission) or N (manual transmission).
Page 620 8-2. Steps to take in an emergency NOTICE ■ To avoid damage to the transmission and other components ● Avoid spinning the rear wheels and depressing the accelerator pedal more than necessary. ● If the vehicle remains stuck even after these procedures are performed, the vehicle may require towing to be freed.
Page 621: Vehicle Specifications
Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.) ..622 Fuel information ....635 Tire information ....638 9-2. Customization Customizable features ..649 9-3. Items to initialize Items to initialize ....657...
Page 622: Specifications Maintenance Data
9-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions Cab type Access Cab Overall length 212.3 in. (5392.3 mm) Overall width 74.4 in. (1890.5 mm) Overall height 70.6 in. (1792.2 mm) Wheelbase 127.8 in. (3247 mm) 63.0 in. (1599 mm) Front tread 63.3 in.
Page 623 : The model code is indicated on the Certification Label. ( P. 625) : Installing accessories in addition to those installed at the factory increases vehicle weight, thereby reducing vehicle capacity weight. Contact your Toyota dealer about the weight of accessory parts.
Page 624 : The model code is indicated on the Certification Label. ( P. 625) : Installing accessories in addition to those installed at the factory increases vehicle weight, thereby reducing vehicle capacity weight. Contact your Toyota dealer about the weight of accessory parts.
Page 625 The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 626 9-1. Specifications Engine 2TR-FE engine  Model 2TR-FE Type 4-cylinder in line, 4-cycle, gasoline 3.74 × 3.74 in. (95.0 × 95.0 mm) Bore and stroke Displacement 164.3 cu.in. (2694 cm Drive belt tension Automatic adjustment Valve clearance Automatic adjustment (engine cold) 2GR-FKS engine ...
Page 627: Lubrication System
Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to sat- isfy the following grade and viscosity. Oil grade: ILSAC GF-5 multigrade engine oil...
Page 628 9-1. Specifications Oil viscosity (0W-20 is explained here as an example): • The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. •...
Page 629: Cooling System
10.1 qt. (9.6 L, 8.4 Imp.qt.) With towing package: 10.8 qt. (10.2 L, 9.0 Imp.qt.) Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol- Coolant type based non-silicate, non-amine, non- nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 630: Electrical System
Oil type and viscosity LT 75W-85 GL-5 or equivalent : Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent oil of matching quality to satisfy the above specification.
Page 631 If replacement is necessary, contact your Toyota dealer. NOTICE ■ Transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of the transmission accompanied by vibration and, ultimately, damage to the vehicle’s transmission. Manual transmission Gear oil capacity (Reference) 2.6 qt.
Page 632 Recommended oil viscosity SAE 75W : Your Toyota vehicle is filled with “Toyota Genuine Transfer Gear oil LF” at the factory. Use Toyota approved “Toyota Genuine Transfer Gear oil LF” or an equivalent of matching quality to satisfy the above specification. Please contact your Toyota dealer for further details.
Page 633 9-1. Specifications Tires and wheels Type A  Tire size P245/75R16 109S Front tires: 32 psi (220 kPa, 2.2 kgf/cm or bar) Tire inflation pressure Rear tires: (Recommended cold 32 psi (220 kPa, 2.2 kgf/cm or bar) tire inflation pressure) Spare tire: 32 psi (220 kPa, 2.2 kgf/cm or bar)
Page 634: Front Turn Signal Lights
9-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights Low beam High beam Front fog lights Normal type Wide angle type Front side marker lights Front turn signal lights/ parking lights 7442NA 28/8 daytime running lights Exterior Front turn signal lights WY21W Stop/tail/rear side marker 7443...
Page 635: Fuel Information
In very few cases, driveability problems may be caused by the brand of gaso- line you are using. If driveability problems persist, try changing the brand of gasoline. If this does not correct the problem, consult your Toyota dealer. ■...
Page 636 Non-recommendation of the use of gasoline containing MMT Some gasoline contains an octane enhancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
Page 637 9-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used, the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction.
Page 638: Tire Information
9-1. Specifications Tire information Typical tire symbols Tire size (→P. 640) DOT and Tire Identification Number (TIN) (→P. 639) Location of treadwear indicators (→P. 519) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
Page 639 9-1. Specifications Typical DOT and Tire Identification Number (TIN) Type A Type B   DOT symbol Tire Identification Number (TIN) Tire manufacturer’s identification mark Tire size code Manufacturer’s optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year Manufacturer’s code The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
Page 640 9-1. Specifications Tire size Typical tire size information ■ The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol (alphabet with one letter)
Page 641 9-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer...
Page 642 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades ■...
Page 643 9-1. Specifications Temperature A, B, C ■ The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissi- pate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
Page 644 9-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation pres- parked for three hours or more, or has not sure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which Maximum...
Page 645 9-1. Specifications Tire related term Meaning A metal support for a tire or a tire and tube assembly upon which the tire beads are seated Rim diameter Nominal diameter of the bead seat (Wheel diameter) Rim size designation Rim diameter and width The industry manufacturer’s designation for a Rim type designation rim by style or code...
Page 646 9-1. Specifications Tire related term Meaning The parting of cords from adjacent rubber Cord separation compounds Any parting within the tread, sidewall, or inner- Cracking liner of the tire extending to cord material A pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the tire is designed to fit on the underside of...
Page 647 9-1. Specifications Tire related term Meaning Any parting at any junction of tread, sidewall, Open splice or innerliner that extends to cord material Outer diameter The overall diameter of an inflated new tire The linear distance between the exteriors of the sidewalls of an inflated tire, including ele- Overall width vations due to labeling, decorations, or protec-...
Page 648 9-1. Specifications Tire related term Meaning A tire that attains a traction index equal to or greater than 110, compared to the ASTM E- 1136 Standard Reference Test Tire, when using the snow traction test as described in Snow tire ASTM F-1805-00, Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow-and Ice-Covered Surfaces, and...
Page 649: Customization
Your vehicle includes a variety of electronic features that can be personalized to your preferences. The settings of these features can be changed using the multi-information display, the multi- media system, or at your Toyota dealer. Customizing vehicle features Changing by using the multimedia system ■...
Page 650 Select an item and then set it with the center button. Customizable features Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Settings that can be changed using the multi-information display. Settings that can be changed using the multimedia system.
Page 651 9-2. Customization Customized Function Default setting setting Digital speedom- eter Drive information 1 — Distance to empty Average fuel economy (after 6 of the following reset) Drive information 2 — items: →P. 95 Current fuel econ- Trip distance (after reset) Drive information 3 —...
Page 652 9-2. Customization LDA (Lane Departure Alert) (→P. 249) ■ Customized Function Default setting setting — — LDA sensitivity 1 (Standard) 2 (High) — — Sway warning 1 (Low) — — Sway warning sensitivity 2 (Standard) 3 (High) : If equipped PCS (Pre-Collision System) (→P.
Page 653 9-2. Customization Smart key system and wireless remote control (→P. 111) ■ Customized Function Default setting setting Operation signal — (Emergency flashers) Operation signal — — (Buzzer) Operation buzzer volume Level 5 Off to level 7 Time elapsed before auto- matic door lock function is 30 seconds activated if door is not...
Page 654 9-2. Customization Wireless remote control (→P. 105, 111) ■ Customized Function Default setting setting Wireless remote control — — Driver’s door unlocked in one All doors Unlocking operation step, all doors unlocked in — unlocked in two one step steps Automatic door lock func- tion to be activated if door —...
Page 655 9-2. Customization Automatic light off system (→P. 211) ■ Customized Function Default setting setting Light sensor sensitivity Level 3 Level 1 to 5 — 0 seconds Time elapsed before headlights automatically 30 seconds 60 seconds — turn off after doors are closed 90 seconds : If equipped...
Page 656 9-2. Customization Seat Belt Reminder Buzzer (→P. 567) ■ Customized Function Default setting setting Vehicle speed linked seat — — belt reminder buzzer ■ Vehicle customization ● When the speed-detecting automatic door lock function and shift position linked door locking function (shifting gears to a position other than P locks all doors) are both on, the door lock operates as follows.
Page 657: 9-3. Items To Initialize
9-3. Items to initialize Items to initialize The following items must be initialized for normal system opera- tion after such cases as the battery being reconnected, or main- tenance being performed on the vehicle: Item When to initialize Reference • After reconnecting or chang- Moon roof ing the battery P.
Page 658 9-3. Items to initialize...
Page 659: For Owners
For owners Reporting safety defects for U.S. owners......660 Seat belt instructions for Canadian owners (in French) ....... 661 SRS airbag instructions for Canadian owners (in French) ......663 Camper information ....671...
Page 660: Reporting Safety Defects For U.s. Owners
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 661: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation adéquate des ceintures de sécurité...
Page 662 ATTENTION ■ Dommages et usure de la ceinture de sécurité Inspectez les ceintures de sécurité périodiquement. Contrôlez qu’elles ne sont pas entaillées, effilochées, et que leurs ancrages ne sont pas desserrés. Ne pas utiliser une ceinture de sécurité défectueuse avant qu’elle ne soit remplacée.
Page 663: Srs Airbag Instructions For Canadian Owners (In French)
SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instructions in English.
Page 664 ◆ Coussins gonflables SRS frontaux Coussins gonflables SRS conducteur/passager avant Participent à la protection de la tête et du thorax du conducteur et du passager avant contre les chocs avec les éléments de l’habitacle Coussins gonflables SRS de genoux Participent à la protection du conducteur et du passager avant ◆...
Page 665 Prétensionneurs de ceintures Coussin gonflable conducteur de sécurité Capteur de position du siège Coussins gonflables conducteur genoux Capteurs d’impact latéral Témoins indicateurs “AIR (arrière) BAG ON” et “AIR BAG OFF” Capteurs d’impact latéral Coussin gonflable passager (avant) avant Contacteur boucle Coussins gonflables rideau ceinture sécurité...
Page 666 ATTENTION ■ Précautions avec les coussins gonflables SRS Respectez les précautions suivantes concernant les coussins gonflables SRS. À défaut, des blessures graves, voire mortelles, pourraient s’ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doivent porter leur ceinture de sécurité...
Page 667 Installez dans un siège de sécurité enfant les enfants trop jeunes pour pouvoir utiliser la ceinture de sécurité. Toyota recommande vivement que tous les nourrissons et enfants soient installés dans les sièges arrière du véhicule et convenablement attachés.
Page 668 ATTENTION ■ Précautions avec les coussins gonflables SRS ● Ne pas s’asseoir sur le bord du siège et ne pas s’appuyer contre la planche de bord. ● Ne laissez pas un enfant debout face au coussin gonflable SRS passager avant ni assis sur les genoux d’un passager avant.
Page 669 ATTENTION ■ Précautions avec les coussins gonflables SRS ● Ne rien fixer sur les parties telles que les portes, la vitre de pare-brise, les vitres latérales, les montants avant et arrière, les rails latéraux de toit et les poignées de maintien. ●...
Page 670 Modification et élimination en fin de vie des éléments du système de coussins gonflables SRS Consultez impérativement votre concessionnaire Toyota si vous avez besoin d’intervenir sur votre véhicule ou de procéder à l’une des modifications suivantes. Les coussins gonflables SRS peuvent ne pas fonctionner correctement ou se déployer (gonfler) accidentellement,...
Page 671: Camper Information
National Highway Traffic Safety Administration of the U.S. Department of Transportation. It provides the purchasers and/ or prospective purchasers of Toyota vehicles with information on truck-camper loading. Your Toyota dealer will help answer any questions you may have as you read this information.
Page 672 Cargo weight rating and proper matching When the truck is used to carry a slide-in camper, the total cargo load of the truck consists of the manufacturer’s camper weight figure, the weight of installed additional camper equipment not included in the manufacturer’s camper weight figure, the weight of camper cargo, and the weight of passengers in the camper.
Page 673 Cargo weight rating ■ Cargo Weig Trans Pass V.C.W NO. Engine missi Drive Grade enge Ratin Access Long 1,500 Double Short 1,400 Access Long 1,400 Double Short 1,200 Double Short Limited 1,250 Double Long 1,200 Double Long Limited 1,200 Access Long 1,300 Access Long 1,100...
Page 674 Gross axle and vehicle weight ratings Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the truck camper is loaded, drive to a scale and weigh on the front and on the rear wheels separately to determine axle loads.
Page 675 GAWR and GVWR ■ GAWR Model code GVWR Front Rear Except GRN310L-PRTSHA/ 2910 lb. GRN310L-PRTLHA (1320 kg) 3280 lb. 5600 lb. (1490 kg) (2545 kg) GRN310L-PRTSHA/ 3040 lb. GRN310L-PRTLHA (1380 kg) The model code is indicated on the Certification Label. (→ P. 625 )
Page 677: Index
Index What to do if... (Troubleshooting) ....678 Alphabetical index ..... 682 For vehicles with Entune Audio Plus or Entune Premium Audio, refer “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL” for information regarding the multimedia system. Audio system types: →P. 336...
Page 678 You lose your keys ● If you lose your keys or mechanical keys, new genuine mechanical keys can be made by your Toyota dealer. (→P. 107) ● If you lose your keys or electronic keys, the risk of vehicle theft increases significantly.
Page 679 What to do if... (Troubleshooting) If you think something is wrong The engine does not start (vehicles without a smart key system) ● Vehicles with an automatic transmission: Is the shift lever in P? (→P. 193) ● Vehicles with a manual transmission: Do you turn the key with the clutch pedal depressed firmly? (→P.
Page 680 What to do if... (Troubleshooting) The steering wheel cannot be turned after the engine is stopped ● Vehicles without a smart key system: It is locked to prevent theft of the vehicle if the key is removed from the engine switch. (→P. 194) ●...
Page 681 What to do if... (Troubleshooting) An alarm is activated and the horn sounds (vehicles with an alarm) ● Did anyone inside the vehicle open a door during setting the alarm? The sensor detects it and the alarm sounds. (→P. 79) ●...
Page 682: Alphabetical Index
Alphabetical index Alphabetical index Side and curtain shield airbags operating A/C ........426, 432 conditions ......41 Air conditioning filter ..... 534 Side and curtain shield Automatic air conditioning airbags precautions....38 system ........ 432 SRS airbags ......34 Manual air conditioning Alarm system ........
Page 683 Alphabetical index Automatic transmission Brightness control Automatic transmission..201 Instrument panel light If the shift lever cannot be control ........91 shifted from P ..... 205 BSM (Blind Spot Monitor)..291 S mode ......... 204 Blind Spot Monitor Power mode switch....203 function.......
Page 684 Alphabetical index Child safety ........ 50 Cup holders ......447 Airbag precautions....37 Curtain shield airbags....35 Battery precautions....616 Customizable features .... 649 Child restraint system ..... 51 How your child should wear the seat belt ....30 Daytime running light Installing child restraints ..
Page 685 Alphabetical index Driving ........160 If your vehicle has to be Break-in tips......163 stopped in an emergency... 557 Correct driving posture ... 26 If your vehicle needs Driving assist system .... 319 to be towed......559 Procedures ......160 If your vehicle overheats..
Page 686 Alphabetical index Engine switch Fuel ........... 626 (ignition switch)..... 193, 196 Capacity........ 626 Engine switch light Fuel gauge......90 (ignition switch light) .... 441 Fuel pump shut off system ... 565 Event data recorder (EDR)..10 Information......635 Refueling ......224 Type........
Page 687 Alphabetical index Hands-free system I/M test ........502 (for cellular phone) ..371, 386 Identification Head restraints ......136 Engine ........625 Headlights ........ 211 Tire ........639 Automatic High Beam ... 215 Vehicle........625 Light switch ......211 Ignition switch Replacing light bulbs..
Page 688 Alphabetical index Jack Lane Departure Alert (LDA) ..249 Positioning the jack....601 Language Vehicle-equipped jack... 595 (multi-information display)..97 Jack handle ......599 LATCH anchors ....58, 59 Jam protection function Moon roof......154 (Lane Departure Alert) ..249 Power windows.....
Page 689 Alphabetical index Personal lights ...... 442 Mirrors Replacing light bulbs..... 543 Inside rear view mirror ..142 Turn signal lever ....209 Outside rear view Vanity lights ......462 mirror defoggers..428, 435 Wattage ........ 634 Outside rear view mirrors ..145 Load capacity......
Page 690 Alphabetical index Opener Power outlets....464, 465 Hood ........505 Power steering fluid ....514 Outside rear view mirrors ..145 Power windows ....... 147 Adjusting and folding .... 145 Jam protection function ..148 Blind spot monitor ....291 Operation......
Page 691 Alphabetical index Refueling ........224 Seat heaters ......439 Capacity........ 626 Seating capacity ...... 174 Fuel types ......626 Seats, Front......131 Opening the fuel tank cap..226 Adjustment......131 Replacing Adjustment precautions ..132 Electronic key battery ... 537 Cleaning .......
Page 692 Alphabetical index Side marker lights ....211 Steering wheel audio Light switch ......211 switches ....... 340 Replacing light bulbs..547, 551 Stop lights Wattage ........ 634 Replacing light bulbs .... 551 Side mirrors ......145 Wattage ........ 634 Adjusting and folding .... 145 Storage box......
Page 693 Alphabetical index Headlight switch....211 Ignition switch ....193, 196 Tachometer ........ 90 Intuitive parking assist ..275 Tail lights........211 LDA (Lane Departure Light switch......211 Alert) switch......249 Replacing light bulbs .... 551 Light switches ....... 211 Wattage ........ 634 Moon roof switches....
Page 694 Voice command system ..420 Dinghy towing ....... 192 Emergency towing ....561 (Vehicle Stability Control) ..319 Trailer towing ......175 Toyota Safety Sense P .... 228 Automatic High Beam ... 215 Dynamic radar cruise Warning buzzers control......... 257 Brake Override System .......
Page 695 Alphabetical index Reverse warning....208 Washing and waxing....490 Seat belt reminder ....567 Weight Warning lights......85 Cargo capacity...... 174 ABS........566 Cargo weight rating ....673 Brake system ......566 Gross axle weight rating ..675 Gross combination (Lane Departure Alert)..
Page 696: Gas Station Information
GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 505 P. 226 Hood lock release Tire inflation pressure lever P. 505 P. 633 Fuel tank capacity 21.1 gal. (80.0 L, 17.6 Imp.gal.) (Reference) Fuel type P. 626, 635 Cold tire inflation pressure P.

Toyota Tacoma 2018 Owner's Manual

1-1. for Safe Use

Theft Deterrent System

2 Instrument Cluster

3 Operation of each Component

3-1. Key Information

Adjusting the Seats

4 Driving

4-1. before Driving

Operating the Lights and Wipers

4-4. Refueling

4-5. Using the Driving Support Systems

Driving Tips

5 Multimedia

5-1. Basic Operations

Setup

Using the Multimedia System

Using the Radio

5-6. Using an External Device

6 Interior Features

Using the Air Conditioning System

Using the Interior Lights

6-3. Using the Storage Features

6-4. Other Interior Features

7 Maintenance and Care

Maintenance and Care Cleaning and Protecting

Maintenance

7-3. Do-It-Yourself Maintenance

8 When Trouble Arises

8-1. Essential Information

Steps to Take in an Emergency

9 Vehicle Specifications

Specifications Maintenance Data

Customization

9-3. Items to Initialize

10 For Owners

Quick Links

Troubleshooting

Related Manuals for Toyota Tacoma 2018

Summary of Contents for Toyota Tacoma 2018