Hardware Installation; Installing The Bluetooth Software - D-Link DCF-650BT Manual

Bluetooth compact flash card

Hide thumbs Also See for DCF-650BT:

Table of Contents

Enlarged version

Hardware Installation

Insert the DCF-650BT into your

handheld device.

Connect your PDA to the computer

you are using to install the drivers

using the type A USB cable pro-

vided with your PDA.

Before proceeding, make sure that you have ActiveSync

installed on the computer that you are using to install the

drivers. ActiveSync will sync your computer and PDA and

enable you to install drivers on your PDA. You can download

ActiveSync for free from Microsoft's website

www.microsoft.com.

Insert the driver DCF-650BT

Driver CD into your CD-ROM

drive. You will see the following

screen.

Click

Install Drivers

If the Autorun screen does not automatically start, click on Start > Run, enter

"D:\Autorun.exe" and click OK. "D" represents the letter of your CD-ROM

drive. Replace it if your CD-ROM drive is a different letter.

Note: If the connection between the PDA and the computer is not ON, an error

message will appear. Check if your cable connections are secure and that

ActiveSync has established a connection before proceeding.

Table of Contents