Turning the Home Theatre System On
Start Up
1.
Press the ON/STANDBY button on the DVD player or the
the remote control to turn the system on.
Press the SOURCE button repeatedly on the unit or the DVD button on the remote
2.
control to select DVD mode.
3.
Turn on the TV and select the video input connected to the DVD player.
Adjusting the Speakers Volume and Balance
Subwoofer Speaker
Press the SUBWOOFER button on the DVD player or on the remote control and then press
the
/
button on the remote control to select the desired setting: soft / balance / strong
/ powerful.
Surround Sound
Press the SURROUND button on the remote control and then press the
the remote control to select the desired setting: 5.1 ch / Stereo.
If the AUX IN or AUDIO IN audio signal is mono, you may not receive audio on all speakers.
Level
Press the LEVEL button on the remote control and then press the VOL+ / – button on the
remote control to adjust the value.
For more settings, please refer to Audio Setup section for more details.
Volume Adjustment
1.
Press the VOLUME
remote control to adjust the volume.
Press the MUTE button on the remote control to switch the sound off. Press the MUTE
2.
button on the remote control again or the VOL+ / – button on the remote control to
resume normal playback.
/
button on the DVD player or the VOL+ / – button on the
STANDBY/ON button on
/
button on
GB
21