Logging Functions - Manual Logging (Recording) - GE Hygromaster Instruction Manual

6

Logging Functions - Manual Logging (Recording)

It is recommended that the clock is checked before performing manual logging.
Note:
Use as described above to scroll to the time/date display. The clock must be set from
1.
the PC as described above whenever the batteries are replaced.
With the instrument OFF, press and hold
2.
This behaves exactly as if the logging were performed using the timer as above. There is no
requirement for logging to have been enabled first, although it may be useful to set the job
number.
Similarly, with the instrument ON, press and hold
3.
point. In this case, note that the side port must be previously set in "surface temperature"
mode if this input is to be used. Again there is no requirement for logging to have been
enabled first, although it may be useful to set the job number.
GE Protimeter Hygromaster
for 3 seconds to take a manual log point.
for 3 seconds to take a manual log
Page 18