5
5.7 OUTLINE OF RS-232C COMMAND
[1] PREPARED TOOLS
It is necessary to prepare the following one to use 232C command.
• PC
• Application for control
• 232C cable (straight)
∗ The setting of the Com port cannot be communicated if it doesn't do correctly.
(Please follow a set explanation of PC in the Com port)
[2] USING RS-232C COMMANDS
Individual ports are provided for RS-232C and SR+ connectors with this model. Therefore, unlike the case of previous models,
which required switching of exclusive operation between these connectors on the Integrator menu, switching is no longer
required.
5
6
PDP-5020FD
6
7
7
8
A
B
C
D
E
F
87
8