Status Display - Siemens SINUMERIK 840D sl Operating Manual

Introduction
2.4 Operator interface
7 Display for
Active tool T
•
Current feedrate F
•
Active spindle with current status (S)
•
Spindle utilization rate in percent
•
Name of the active tool carrier with display of a rotation in space and plane
•
Name of the active kinematic transformation
•
8 Operating window with program block display
9 Display of active G functions, all G functions, auxiliary functions and input window for different functions (for exam-
ple, skip blocks, program control).
10 Dialog line to provide additional user notes.
11 Horizontal softkey bar
12 Vertical softkey bar
Figure 2-3 User interface
2.4.2

Status display

The status display includes the most important information about the current machine status
and the status of the NCK. It also shows alarms as well as NC and PLC messages.
Depending on your operating area, the status display is made up of several lines:
● Large status display
The status display is made up of three lines in the "Machine" operating area.
● Small status display
In the "Parameter", "Program", "Program Manager", "Diagnosis" and "Start-up" operating
areas, the status display consists of the first line from the large display.
Status display of "Machine" operating area
First line
Ctrl-Energy - Power rating display
Display
34
Description
The machine is not productive.
The machine is productive and energy is being consumed.
The machine is feeding energy back into the grid.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal