Samsung CLX-9350ND Service Manual page 77

3. HR(Half Rate)-Carriage
HR-Carriage mainly consists of the mirror-2, mirror-3,
through the mirrors-2 and -3 to the lens. This carriage
carriage at half the scanning speed of the FR-carriage
carriage). i )
4. Lens unit
The light reflected from the mirror-3 is led to the CCD
in a position.
5. CCD board
Processes such as signal amplification, signal integra
electrical signal which was converted by the CCD.
6. Scan Main board
This is a board to perform image correction, such as
7. Auto Paper Sensor
The size of an original placed on the glass is instantly
Align-frame.
Service Manual
CLX-9250/9350 series
2. Product d
e is driven by the same scan motor as that of the FR-
e (The scanning distance is also half that of the FR-
Mirror-2
Mirro
D placed at the focal point of the lens which is fixed
2-6
description
etc., and it directs the reflected light from the mirror-1
r-3
ation, and A/D conversion are applied on the
shading correction and Image Enhancement.
y detected using the Auto Paper Sensor fixed on the
60
SAMSUNG ELECTRONICS