Canon DP-V2411 Instruction Manual page 70

OSD Menu
Sub Menu
Banner
70
Function Button Guide
OSD Position
OSD Size
Reduce Backlight Flash On, Off
Camera Link
Automatic Adjustment
(CINEMA EOS)
Color Gamut/Gamma
Color Temperature
Color Range
Display Color Gamut
Automatic Adjustment
(ARRI)
User LUT/Color Gamut/
Gamma
Color Range
Automatic, On, Off
You can set how the banner is displayed in cases such as when the
display is turned on or the channel is changed. The banner displays the
channel name, signal information and status of the main unit.
When all OSD are hidden, you can display the banner by pressing the
jog dial. However, when this setting is [Automatic] or [On], the banner will
disappear after approximately 6 seconds.
[Automatic]: After the banner is displayed, it will disappear after
[On]: Displays the banner.
[Off]: Does not display the banner.
On, Off [On]: When all OSD are hidden, you can display the list of functions
[Off]: Function Button Guide is not displayed.
Mode 1 (4096x2160)
[Mode 1 (4096x2160)]: OSD is displayed in a 4096x2160 area.
Mode 2 (3840x2160) [Mode 2 (3840x2160)]: OSD is displayed in a 3840x2160 area.
Large The size of the OSD menu can be selected from [Large] and [Small].
Small
When [Adjustment]
the screen may exhibit a flash in cases such as switching between scenes
with a large difference in luminance. You can use [Reduce Backlight Flash]
to reduce this phenomenon.
Sets the functions to link with Cinema EOS cameras and ARRI cinema cameras.
When [Picture Mode] [CINEMA EOS SYSTEM], [Input Configuration]
[3G-SDI RAW]
Sets whether or not to link to the camera's image quality setting.
On, Off Refer to the Setting Values Correspondence Table when [Color Gamut/
Gamma], [Color Temperature], and [Color Range] are all set to [On]. (
On, Off The image quality of the display corresponds to the camera's settings.
On, Off
On, Off
ITU-R BT.709 Sets the color gamut shown on the display when the camera's [Color
ITU-R BT.2020 Space] is set to [Cinema Gamut] or [DCI-P3+].
DCI-P3
When [Picture Mode] [User 6] to [User 7], [Input Configuration]
Sets whether or not to link to the camera's image quality setting.
On, Off
When [CDL/User LUT]
Refer to the Setting Values Correspondence Table when [ARRI LUT] is
selected. (
On, Off The image quality of the display corresponds to the camera's settings.
On, Off The image quality of the display corresponds to the camera's settings.
Setting Options (Bold: factory default)
approximately 4 seconds.
assigned to an F button on the video display by pressing the jog dial.
[Backlight Control] is set to an option other than [Off],
[User LUT]
74)
[12-3G/HD-SDI] or
73)
[12-3G/HD-SDI]