Toshiba D-R4SU Service Manual page 8

1-1-2. Front Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Disconnect three connectors (1).
3. Remove one screw (2) and the earth lead.
4. Remove two screws (3) and four claws, then remove the front panel (4).
1-1-3. RAM Drive
1. Remove the front panel. (Refer to item 1-1-2.)
2. Disconnect the flexible cable (1) and connector (2).
3. Remove three screws (3) and the screw (4), then remove the RAM drive (5).
4. Remove the shield cover (6).
Note:
• After replacing, attach the tape (1) to its original position.
Connector (1)
Connector (1)
Claw
Earth
Claws
Screws (3)
Fig. 2-1-2
Screws (3)
Flexible
cable (1)
Fig. 2-1-3
Screws (2)
Connector (1)
Claw
Front panel (4)
Screw (4)
Shield cover (6)
RAM drive (5)
Connector (2)