Accessories; Drive-Cliq Cabinet Bushing; Description; Safety Information - Siemens SINAMICS S120 Combi User Manual

Accessories

12.1

DRIVE-CLiQ cabinet bushing

12.1.1

Description

The DRIVE-CLiQ cabinet bushing is used in a control cabinet panel, and serves to connect
the DRIVE-CLiQ cables between the inside and the outside of the control cabinet. The data
lines and the voltage supply contacts of the DRIVE-CLiQ are also routed through the
bushing.
The DRIVE-CLiQ cabinet bushing has degree of protection IP54 according to EN 60529 from
the outside towards the inside. Inside the control cabinet, a connection is established
according to degree of protection IP20 or IPXXB acc. to EN 60529. So that the complete
outside of the cabinet bushing, including the DRIVE-CLiQ interface, has degree of protection
IP54, a DRIVE-CLiQ cable must be used, which as a minimum must also have degree of
protection IP54.
12.1.2

Safety Information

Note
Only cables from Siemens may be used for DRIVE-CLiQ connections.
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
12
229