Huawei eSpace 6805 User Manual page 26

Huawei IP Phone eSpace
User Manual
Field
IP Address
802.1X mode
Iine Keys
Time Zone
68105
Description
The eSpace 6805 operates in two modes:
DHCP/PPPoE Mode:

All the field values for the static IP mode are not
available even though they are stored in the Flash
memory. The eSpace
the first DHCP server that the eSpace
LAN. To use the PPPoE feature, set the PPPoE account.
The eSpace 6805
the PPPoE fields are set.
Host Name and Domain Name:The special DHCP
options that are added to the DHCP Discover and DHCP
Request after configuration.
Preferred DNS: The eSpace
Preferred DNS is configured.
Static IP Mode:

Configure all of the following fields: IP address, Subnet
Mask, Gateway, Default Router IP address, DNS
Server 1 (primary), and DNS Server 2 (secondary).
This parameter is set to perform the 802.1X authentication
when the IP phone is connected to a switch. You can click
Disable to disable the authentication function, and click
EAP-MD5 to perform the registration authentication.
Identify

ID used during the 802.1x authentication
MD5 Password

MD5 password used during the 802.1X authentication
This parameter is set for specifying function modes of line
keys. By default, the value of Key Mode is Line, which is
used by common lines. If the value of Key Mode is Shared
Line, it indicates that the BroadSoft SCA functions are
enabled and that accounts scattered in various areas can share
the line.
This parameter controls the date and time display according
to the specified time zone. If the DHCP Option 2 is enabled,
the DHCP server overrides and centrally controls the setting
of Time Zone in the phone. The feature functions on the
phone only when you set the NTP server correctly.
21
4 Configuring the eSpace 6805
6805 acquires its IP address from
establishes a PPPoE session if any of
6805 uses the DNS server if
6805 detects on its