Advertisement
Before Using Handset
Accessory
Battery (SHBBZ1)
Battery Installation
11
Remove cover
.
Press and slide as shown.
21
Insert battery
31
Close cover
ii
Charging
Use specified AC Charger ZTDAA1 (sold
separately) only.
Small Light
External
AC 100V Outlet
Device Port
Blades
Charger
Connector
Release
2
Tabs
Port Cover
3
1
Arrows
AC Charger
11
Open Port Cover to connect
AC Charger
21
Plug AC Charger into AC
outlet
.
Small Light illuminates red while
charging.
.
Small Light goes out when battery is
full.
31
After charging, unplug AC
Charger, then disconnect
handset
USIM Card Installation
Notch
11
Slide in USIM Card with IC
chip facing down
21
Insert battery (P.ii)
.
First power off handset and remove
battery.
.
Do not force USIM Card into/out of
handset.
.
USIM Card must be inserted to use
handset.
USIM PINs
PIN
■
4-digit code; activate PIN Entry to restrict
usage.
PIN2
■
Required to clear Call Costs and to set
Max Cost.
PIN and PIN2, 9999 by default, are
changeable.
PIN Lock & Cancellation (PUK Code*)
■
Entering incorrect PIN or PIN2 three
consecutive times locks USIM Card,
disabling handset. Enter PUK Code to
unlock. For details, contact SoftBank
Customer Center, General Information.
*
USIM Personal Unblocking Key (PUK
Code) unblocks a USIM Card blocked
after the wrong PIN has been entered
three consecutive times. Each USIM
Card has a unique PUK Code. Do not
disclose it to unauthorized persons.
iii
Advertisement
