PART V. Changing Jobs
3. Clean the feeder base
Remove the chips or other foreign matter on the feeder base
upper surface and in the slot by using the provided brush or
another small brush.
4. Loading the PCB file
Load a new PCB file. For more details, refer to 'Loading
the PCB file' of 'PART III. Production'.
5. Remove backup-pin
Before removing the backup-pin, power off the
motor.
Warning
6. Adjusting the conveyor width
Adjust the conveyor width according to the new PCB. For
more details, refer to 'Adjusting the conveyor width' of
'PART III. Production'.
PART V
Changing Jobs
SM421 Operation Handbook
47