Storage Servers - Fujitsu ETERNUS CS800 S6 User Manual

4. On the source system, specify the target system that will receive the replicated data.
5. On the source system, create a remote OST user with the same user name and
password that you used in step 2 above (see
CAUTION!
On the source system, make sure to create a remote user on the Configuration >
OST > Manage Remote Users page.
6. On the source system, create a storage server and LSU, and enable the LSU for
Automatic Image Replication (see
For Remote Storage Server and Remote LSU, make sure to specify the storage server
and LSU created in step 3 above. Also, for Remote User, make sure to select the
remote user created in step 5 above.
7. Configure storage lifecycle policies in NetBackup to control when automatic replication
of the LSU occurs (see the Symantec NetBackup Administrator's Guide).
Figure 162: Setting Up OST Automatic Image Replication

10.4.2 Storage Servers

The Storage Servers page allows you to manage OST storage servers on the ETERNUS
CS800. You can view information about existing storage servers, add or edit storage
servers, and delete storage servers.
To access the Storage Servers page, on the OST page, click the Storage Servers tab (see
"Storage Servers Page" on page
ETERNUS CS800
"Manage Remote Users" on page
"Adding a Storage Server" on page
231).
10.4 OST Configuration
245).
232).
230