Lldp Enable; Lldp Encapsulation Snap - HP 12500 Series Command Reference Manual

Related commands
lldp hold-multiplier
•
lldp timer tx-interval
•

lldp enable

Use lldp enable to enable LLDP on a port.
Use undo lldp enable to disable LLDP on a port.
Syntax
lldp enable
undo lldp enable
Default
LLDP is enabled on a port.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
LLDP takes effect on a port only when LLDP is enabled both globally and on the port.
Examples
# Disable LLDP on GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] undo lldp enable
Related commands
lldp global enable

lldp encapsulation snap

Use lldp encapsulation snap to configure the encapsulation format for LLDPDUs as SNAP.
Use undo lldp encapsulation to restore the default encapsulation format for LLDPDUs.
Syntax
lldp encapsulation snap
undo lldp encapsulation
Default
Ethernet II is the encapsulation format for LLDPDUs.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
138