Pocket Calculator - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Accepting parameters
When you have correctly entered all necessary parameters, you can close the window and
save your settings.
You cannot accept the parameters if they are incomplete or obviously erroneous. In this
case, you can see from the dialog line which parameters are missing or were entered
incorrectly.
1.4.8
Pocket calculator
You can use the pocket calculator to quickly calculate parameter values during
programming. If, for example, the diameter of a workpiece is only dimensioned indirectly in
the workpiece drawing, i.e., the diameter must be derived from the sum of several other
dimension specifications, you can calculate the diameter directly in the input field of this
parameter.
Calculation methods
The following arithmetic operations are available:
● Addition
● Subtraction
● Multiplication
● Division
● Calculation with parentheses
● Square root of x
● x squared
You can input a maximum of 256 characters in a field.
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Press the "OK" softkey.
- OR -
Press the "Accept" softkey.
- OR -
Press the <Cursor left> key.
Introduction
1.4 User interface
37
Advertisement
Table of Contents
