Updating The Software; Remote Configuration - Siemens hipath 1100 Service Manual

For internal distribution only

7.2.7 Updating the Software

SW Information (001)
This displays information about the system's software. To view this information use
a system telephone with a display.
Local SW Update (060)
This setting allows you to update the software that is now running on the computer.
Activating a SW Update (055)
This feature allows you to update the system's software automatically at a scheduled
date.
Day for Update (054)
This setting specifies a day for starting the data transfer (upload process).
Time for Software Update (058)
This setting specifies the time of day for starting the data transfer on the specified
day.
External Number for Updating the Software (056)
This setting specifies a number to be used by the system to update the software.
Frequency for SW Update (057)
This setting specifies regular intervals in months for transferring data.
During a transfer the telephone operates as usual.
Uploading the SW Update (059)
This setting specifies the moment data downloaded will be uploaded to the system's
memory.
While this upload is in progress (lasting approximately 3 minutes), the telephone re-
mains out of service.

7.2.8 Remote Configuration

Service Call (*994)
This feature allows you to call a service center and let administration be carried out
remotely through the on-going call.
Remote Software Update (*9415)
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
Configuring the System Specifically for the Client
Comments about the System's Programming Codes
7-39