D-Link DSA-3100 User Manual page 23

DSA-3100 Wireless Service Gateway User Manual
Note: The LAN IP address must be set to enable network access between the DSA-3100 and
managed client devices. The built-in DHCP server could be enabled or not. It is recommended
that a DNS server be specified to provide the DSA-3100 and clients complete networking
parameters. If you have another network that you want to connect to the DSA-3100 to facilitate
its network services, you could connect that network to the Authentication interface of the
DSA-3100. Devices on the network connected to Authentication gain access to the network on
Local Network and WAN interfaces of the DSA-3100 without authentication. A sample system
configuration is shown in Figure 1-2 Sample Interface configuration page.
20