Sony TRINITRON KV-30HS510 Service Manual

Sony TRINITRON KV-30HS510 Service Manual

Hide thumbs Also See for TRINITRON KV-30HS510:
Table of Contents

Advertisement

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:

SERVICE MANUAL

MODEL NAME
KV-30HS510
KV-30HS510
KV-30HS510
ORIGINAL MANUAL ISSUE DATE: 8/2003
:UPDATED ITEM
REVISION DATE
8/2003
3/2004
12/2004
9-965-952-03
REMOTE COMMANDER
RM-Y191
RM-Y191
RM-Y191
REVISION TYPE
SUBJECT
No revisions or updates are applicable at this time.
Removed landing settings information from 2-1. Beam Landing instructions (Don't apply to this model.)
Replaced page 12 with page 12.
Added complete Service Data List, Replaced pages 25-27 with pages 25-A through 25-FF.
(Note: Removed page 26)
Replaced page 27 with page 27.
Corrected D Board Schematic Page 2. Replaced page 33 with page 33.
Corrected ID Map Table for KV-30HS510 Replaced page 27 with page 27.
DA-4
DESTINATION
CHASSIS NO.
US
SCC-S66N-A
CANADA
SCC-S70M-A
HAWAII
SCC-S69E-A
®
TRINITRON
COLOR TELEVISION
CHASSIS

Advertisement

Table of Contents
loading

Summary of Contents for Sony TRINITRON KV-30HS510

  • Page 1: Service Manual

    HISTORY INFORMATION FOR THE FOLLOWING MANUAL: DA-4 SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KV-30HS510 RM-Y191 SCC-S66N-A KV-30HS510 RM-Y191 CANADA SCC-S70M-A KV-30HS510 RM-Y191 HAWAII SCC-S69E-A ORIGINAL MANUAL ISSUE DATE: 8/2003 :UPDATED ITEM REVISION DATE REVISION TYPE SUBJECT 8/2003 No revisions or updates are applicable at this time.
  • Page 2 Self Diagnosis Supported model DA-4 SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KV-30HS510 RM-Y191 SCC-S66N-A KV-30HS510 RM-Y191 CANADA SCC-S70M-A KV-30HS510 RM-Y191 HAWAII SCC-S69E-A KV-30HS510 RM-Y191 ® TRINITRON COLOR TELEVISION 9-965-952-03...
  • Page 3: Table Of Contents

    KV-30HS510 TABLE OF CONTENTS SECTION TITLE PAGE SECTION TITLE PAGE Specifi cations ................. 4 4-3. Remote Adjustment Buttons and Indicators ......24 Warnings and Cautions ..............5 4-4. Service Data Lists ..............25 Safety Check-Out ................6 4-5. ID Map Tables ..............27 Self-Diagnostic Function..............
  • Page 4: Specifi Cations

    SRS (SOUND RETRIEVAL SYSTEM) is manufactured TruSurround is a trademark of SRS Labs, Inc. SRS and the SRS by Sony Corporation under license from SRS Labs, Inc. It is symbol are registered trademarks of SRS Labs, Inc. in the United covered by U.S.
  • Page 5: Warnings And Cautions

    Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifi...
  • Page 6: Safety Check-Out

    KV-30HS510 SAFETY CHECK-OUT Leakage Test After correcting the original service problem, perform the following The AC leakage from any exposed metal part to earth ground and from safety checks before releasing the set to the customer: all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes).
  • Page 7: Self-Diagnostic Function

    KV-30HS510 Self Diagnosis SELF-DIAGNOSTIC FUNCTION Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER LED will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY/TIMER LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 8 KV-30HS510 Self-Diagnostic Screen Display For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confi rmed, it is possible to bring up past occurrences of failure on the screen for confi rmation. To Bring Up Screen Test In standby mode, press buttons on the Remote Commander sequentially, in rapid succession, as shown below: Channel 5...
  • Page 9 KV-30HS510 +B overcurrent (OCP) Occurs when excessive current fl ows through R5013. The increase in voltage across R5013 causes the output of Q5004 to go high, and this high signal goes to the micro. +B overvoltage (OVP) IC6505 detects +B OVP condition and turns on Q6522. This sends a high signal to the micro and also shuts down the AC relay. V-STOP Occurs when an absence of the vertical defl...
  • Page 10: Section 1: Disassembly

    KV-30HS510 SECTION 1: DISASSEMBLY 1-1. REAR COVER REMOVAL 4 Screws +BVTP 4 x 16 Rear Cover 3 Screws +BVTP 4 x 16 6 Screws +BVTP 4 x 16 1-2. CHASSIS ASSEMBLY REMOVAL Lift lever up on the right and left sides of the chassis bracket and gently pull the chassis assembly away from the bezel.
  • Page 11: Picture Tube Removal

    KV-30HS510 1-4. PICTURE TUBE REMOVAL WARNING: BEFORE REMOVING THE ANODE CAP High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, Coated discharge CRT before attempting to remove the anode cap. Short between anode and CRT Earth coated earth ground strap.
  • Page 12: Section 2: Set-Up Adjustments

    KV-30HS510 SECTION 2: SET-UP ADJUSTMENTS The following adjustments should be made when a complete Perform the adjustments in order as follows: realignment is required or a new picture tube is installed. 1. Beam Landing 2. Convergence These adjustments should be performed with rated power supply 3.
  • Page 13: V-Pin And V-Cen Adjustment

    KV-30HS510 8. Set corner landing adjustments. 3. Horizontal lines should be straight from left to right. Check landing for side effect. To get optimal landing, adjust LT, LB, RT, and RB with Service Data -/+ NOTE: If landing adjustment exceeds the limit, as a last resort you can 2-3.
  • Page 14: 2-3.2. Operation Of Bmc (Hexapole) Magnet

    KV-30HS510 2-3.2. OPERATION OF BMC (HEXAPOLE) 2-3.3. TLH PLATE ADJUSTMENT MAGNET Preparation: • Input a cross hatch pattern signal. The respective dot positions result from moving each magnet interact. • Adjust unbalanced horizontal convergence of red and blue dots by Perform the following adjustments while tracking.
  • Page 15: Focus Adjustment

    KV-30HS510 2-4. FOCUS ADJUSTMENT Confi rm neck assembly Z axis position 1. Input a dot signal. 2. Set Video Mode to STANDARD. 3. Input a HD monoscope signal. 4. Confi rm center focus with focus VR. NECK ASSEMBLY NOTE: Just position is the adjustment position from the center location indicated.
  • Page 16: Screen (G2)

    KV-30HS510 2-5. SCREEN (G2) 1. Input composite white fi eld into Video 1. 2. Set to service mode and adjust as follows: (Fig 1) Operation Procedure Standards Notes 1) In Full mode, apply changes in CXA2170P-2 PICO 1 Fig 1 2) Mount G2 adjustment jig.
  • Page 17: Picture Quality Adjustments

    KV-30HS510 2-6. PICTURE QUALITY ADJUSTMENTS 2-6.2. VIDEO INPUT - SUB HUE/SUB COLOR ADJUSTMENT Preparation: • Set PRO MODE (Reset). Preparation: • Input a Color Bar signal to VIDEO 1 (75 IRE 75%). 1. Input signal (480i Composite): • Set picture mode: Single (PRO MODE Reset). •...
  • Page 18: 2-6.4. Rf Input - Sub Hue/Sub Color Adjustment

    KV-30HS510 4. Adjust SUB (right) side contrast according to Service Mode for SCON. 6. Adjust SUB (right) side color according to Service Mode for SHUE. 2103-2 2103-2 NO. Name Control Function NO. Name Control Function 02 SCON SUB-CONT 03 SCOL SUB COLOR 04 SHUE SUB HUE...
  • Page 19: 2-7.1. Color Offset Adjustment Procedure

    KV-30HS510 2-7.1. COLOR OFFSET ADJUSTMENT 5. Restore aging, HSIZ and HBLK to original condition. PROCEDURE Raster Edge Equal: Preparation: • Input an all white (30 IRE) signal to the specifi ed input. RASTER • Adjust the white balance using the specifi ed registers. EDGES VIDEO 1 CXA2103-1...
  • Page 20: 2-9.2. 1080I Hd Mode Adjustment

    KV-30HS510 CXA2170D-2 2-9.2. 1080I HD MODE ADJUSTMENT Item 1. HPOS (H-POSITION) 1. Input a 1080i cross-hatch signal and an HD monoscope signal that contains overscan markers. 2. Adjust the raster position per Section 2-8., only if this procedure was not performed for full mode. 3.
  • Page 21: Section 3: Safety Related Adjustments

    KV-30HS510 SECTION 3: SAFETY RELATED ADJUSTMENTS 3-1. PREPARATION BEFORE CONFIRMATION 3-2. B+ MAX CONFIRMATION Standard................135.3 ± 1 VAC Standard 135.3 ± 1 VAC Check Condition: Check Condition: AC input voltage: 120 (± 2) VAC AC input voltage: 120 (± 2) VAC Note: If using a stabilized power supply, make sure that the distortion Note: If using a stabilized power supply, make sure that the distortion factor is 3% or less.
  • Page 22: Hv Service Flowchart

    KV-30HS510 3-3. HV SERVICE FLOWCHART KV-30HS510 HV SERVICE FLOW CHART Start Is FBT/Strike/ Is D board Spare mark part replaced? changed? 1. Replace RV8002 with the correct part Is HV correct? 2. Adjust RV8002 to 30.40+0.2kV at video (30.4+0.2kV) cut off (black video) after 10-15 min warm up.
  • Page 23: Section 4: Circuit Adjustments

    KV-30HS510 SECTION 4: CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER Use the Remote Commander (RM-Y191) to perform the circuit adjustments in this section. Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator 4-1.3. READING THE MEMORY 4-1.
  • Page 24: Memory Write Confi Rmation Method

    KV-30HS510 4-2. MEMORY WRITE CONFIRMATION METHOD 1. After adjustment, pull out the plug from the AC outlet, then replace the plug in the AC outlet again. 2. Turn the power switch ON and set to Service Mode. 3. Call the adjusted items again to confi rm they were adjusted. 4-3.
  • Page 25: Service Data Lists

    KV-30HS510 4-4. SERVICE DATA LISTS Range Initial Data Category Name Item Name VERSION 0-255 DMY1 3D_COMB NRMD CLKS NSDS KILS 0, 1 FRZE EXCS NRMD(0) NRMD(1) NRMD(2) NRMD(3) DYCO 0-15 0-15 DYGA 0-15 DCCO 0-15 DCGA 0, 1 Vivid Standard Movie VAPG 0-31...
  • Page 26 KV-30HS510 Range Initial Data Category Name Item Name 2103_1 480i Others 0-62 YLEV 0-63 CLEV CV/YC 0-15 SCON 0-15 SCOL 0-15 SHUE YDLY 0-15 SHAP SHF0 PREO BPF0 BPFQ CV/YC 0, 1 BPSW 0, 1 TRAP 0, 1 CV/YC Others 0, 1 AFCG CDMD...
  • Page 27 KV-30HS510 Range Initial Data Category Name Item Name 2103_2 0-63 YLEV 0-63 CLEV CV/YC 0-15 SCON SCOL 0-15 0-15 SHUE YDLY 0-15 SHAP SHF0 PREO BPF0 BPFQ CV/YC 0, 1 BPSW 0, 1 TRAP 0, 1 CV/YC 0, 1 AFCG CDMD SSMD 0, 1...
  • Page 28 KV-30HS510 Range Initial Data Category Name Item Name 2170P_1 CV/YC 480i YOSW 0, 1 0, 1 TCOF V5/V6 V5/V6 V5/V6 480p 720p CV/YC 480i 480p 720p 1080i 1080i 1080i 0-15 CBOF 0-63 0-63 CROF SBRT 0-63 0-63 RDRV 0-63 GDRV 0-63 BDRV RCUT...
  • Page 29 KV-30HS510 Range Initial Data Category Name Item Name 0, 1 2170P_2 PICO RGBS BLKB RGBL YLMT AGNG 0, 1 AKBO Other CLPP 0, 1 CLPG 0, 1 CLPS PPAD 0, 1 SYNP 0, 1 HVBT — 25-E —...
  • Page 30 KV-30HS510 Range Initial Data Category Name Item Name 2170P_3 Comp Comp Comp Comp DVI CV/YC 480i 480p 1080i 720p 480i 480p VGA 1080i 720p Menu Single Twin SYSM VMLV 0-15 VMCR VMLM VMF0 0-15 VMDL SHOF 0, 1 SHF0 PROV F1LV LTLV LTMD...
  • Page 31 KV-30HS510 Range Initial Data Category Name Item Name 2170P_3 Comp Comp Comp Comp DVI CV/YC 480i 480p 1080i 720p 480i 480p VGA 1080i 720p Menu Single Twin SYSM 0-15 VMLV VMCR VMLM VMF0 0-15 VMDL SHOF 0, 1 SHF0 PROV F1LV LTLV 0, 1...
  • Page 32 KV-30HS510 Range Initial Data Category Name Item Name 2170P_3 Vivid Standard Movie 0-15 0-15 0-15 VGAP 0-15 VGAS 0-15 VGAB 0-15 VGAC 0-15 0-15 VGAV — 25-H —...
  • Page 33 KV-30HS510 Range Initial Data Category Name Item Name 2170P_4 Other 0, 1 YCON VDO(V5/V6) VDO (DVI) 0-15 SPIC 0-63 SCOL 0-63 SHUE 0-15 SPIO 0-15 SCLO 0-15 SHUO Vivid Standard Movie 0-63 UPIC 0-63 UBRT 0-63 UCOL 0-63 UHUE 0-63 USHP UTMP 0-15...
  • Page 34 KV-30HS510 Range Initial Data Category Name Item Name 2170P_4 Comp Comp Comp Comp DVI CV/YC 480i 480p 1080i 720p 480i 480p VGA 1080i 720p Menu Single Twin Vivid Standard Movie BLK (0) BLK (1) BLK (2) BLK (3) 0-15 DCTR APED 0-15 DSBO...
  • Page 35 KV-30HS510 Category Name No. Item Name Range Initial Data 0-63 2170D_1 VPOS 0-63 VSIZ 1080iFULL Others 0-63 VSZO WideZoom Others 0-15 VLIN 0-15 VSCO 0-63 VCEN 1080Vcomp 480Vcomp Others 0-63 VPIN MVPN 0-63 NSCO 0-31 HTPZ MHTZ WideZoom Zoom Others 0, 1 ZOOM WideZoom...
  • Page 36 KV-30HS510 Category Name No. Item Name Range Initial Data 2170D_2 0-63 HCNT 1080FULL 1080Vcomp Others 0-63 HPOS WideZoom Others 0-63 HSIZ 0-15 SLIN 0-15 MPIN 0-63 1080Vcomp WideZoom Zoom 480FULL 1080FULL 480Vcomp 0-15 PINO WideZoom Others 0-63 0-63 UXCG LXCG UXCP LXCP 0, 1...
  • Page 37 KV-30HS510 Category Name No. Item Name Range Initial Data 2170D_3 0, 1 HBLK 1080FULL 1080Vcomp Others 0-63 LBLK 0-63 RBLK 480FULL 480Vcomp WideZoom Zoom 1080FULL 1080Vcomp 0, 1 VBLK WideZoom Zoom 480FULL 1080FULL 1080Vcomp 480Vcomp 0-15 TBLK 0-15 BBLK 1080FULL 1080Vcomp Others AFCM...
  • Page 38 KV-30HS510 Category Name No. Item Name Range Initial Data 2170D_4 1080Vcomp 480Vcomp Others 0-63 QPAM 0-63 QPAV 0-15 QPAP 0-63 QPDC 0-63 QPDV 0-15 QPDP 0, 1 CPY1 0-63 0-63 0, 1 DHMT 2170D_5 VFRQ 0, 1 0, 1 EWDC 0, 1 MS15 0-255...
  • Page 39 KV-30HS510 Category Name No. Item Name Range Initial Data D_CONV 1080Vcomp 480Vcomp Others 0-63 YBWU 0-63 YBWL 0-63 RSAP 0-63 RUBW 0-63 RUMB 0-63 RLBW 0-63 RLMB 0-63 LSAP 0-63 LUBW 0-63 LUMB 0-63 LLBW 0-63 LLMB 0-63 CADJ 0, 1 CPY2 CXA2151 MTRX...
  • Page 40 KV-30HS510 Category Name No. Item Name Range Initial Data MID1 0-255 DHPH 0-63 DVPH 0-255 DHAR 0-255 DVAR 0-63 DHPW DVPW Single Twin Freeze Favorite Index 480i Others 0-63 DYCD table-0 table-1 table-2 table-3 DYSD Single Favorite Index Others Normal Others Normal Others...
  • Page 41 KV-30HS510 Category Name No. Item Name Range Initial Data MID1 Favorite 0-255 SDHP 0-255 SDVP 0-255 SDHS 0-255 SDVS 0-255 PDHP 0-255 PDVP 0-255 PDHS 0-255 PDVS 1080i Single Others 0, 1 DPSW 0-63 MDLO Single Others Normal Others 0-15 BCOL DYSS Index...
  • Page 42 KV-30HS510 Category Name No. Item Name Range Initial Data MID2 480i Normal Others Normal Others 0-255 DRHP Single 0-255 DRHS 0-63 DRVP 0-255 DRVS 480i 0-255 DRHP 0-255 Twin-Left DRHS 0-63 DRVP 0-255 DRVS 0-255 DRHP 0-255 Twin-Right DRHS 0-63 DRVP 0-255 DRVS...
  • Page 43 KV-30HS510 Category Name No. Item Name Range Initial Data MID2 480i Full Vcomp Full Vcomp 0-255 DRHP Index-Main 0-255 DRHS 0-63 DRVP 0-255 DRVS 0-255 DRHP 0-255 Index-Sub DRHS 0-63 DRVP 0-255 DRVS MID3 1080i 720p 480p 480i Normal Others Normal Others Normal Others 0-255...
  • Page 44 KV-30HS510 Category Name No. Item Name Range Initial Data MID3 1080i 720p 480p 480i FULL Vcomp FULL Vcomp FULL Vcomp FULL Vcomp 0-255 VDHP 0-255 VDHS 0-63 VDVE 0-255 VDVS 0-255 VDHP 0-255 VDHS 0-63 VDVE 0-255 VDVS 1080i 720p 480p 480i FULL...
  • Page 45 KV-30HS510 Category Name No. Item Name Range Initial Data MID5 0-63 MHLY MHLC MVLY MVLC MHYR MHYL MHYE 0, 1 MHYO MHCR MHCL MHCE MHCO MVYR MVYL MVYE MVCR MVCL MVCE 0-63 MHLY MHLC MVLY MVLC MHYR MHYL MHYE 0, 1 MHYO MHCR MHCL...
  • Page 46 KV-30HS510 Category Name No. Item Name Range Initial Data MID5 0-63 MHLY MHLC MVLY MVLC MHYR MHYL MHYE 0, 1 MHYO MHCR MHCL MHCE MHCO MVYR MVYL MVYE MVCR MVCL MVCE 0-63 MHLY MHLC MVLY MVLC MHYR MHYL MHYE 0, 1 MHYO MHCR MHCL...
  • Page 47 KV-30HS510 Category Name No. Item Name Range Initial Data MID5 SHLY SHLC SVLY SVLC SHYR SHYL SHYE 0, 1 SHYO SHCR SHCL SHCE 0, 1 SHCO SVYR SVYL SVYE SVCR SVCL SVCE — 25-W —...
  • Page 48 KV-30HS510 Category Name No. Item Name Range Initial Data CXA3506R 480i Others 0, 1 MCON 0-255 SCOR 0-255 SCOG 0-255 SCOB 0-255 AUDIO 0, 1 ASYS TRCV BACV MDCV SVHI SVLO 0-15 MDFQ LOFQ 0-15 SBAS 0-15 BSFQ 0-15 STRE 0-15 TRFQ 0-15...
  • Page 49 KV-30HS510 Category Name No. Item Name Range Initial Data SNNR MODE SNNR 0-255 110 127 WSLT 0-15 CPFG CPFT CCOR 0, 1 CHCG CAPG 0-15 3SHP 0-15 NYNR 0-15 NCNR NYMG NCMG 0-15 NYLT 0-15 NYNC 0, 1 NYCO 0-63 7SHP 7YF1 7LTI...
  • Page 50 KV-30HS510 Category Name No. Item Name Range Initial Data 0-255 HPRM 0-255 HPRS 0, 1 YSYM CCDI CRIP 0, 1 PHLD 0-63 CHMK 0-15 LANG 0, 1 DATA 0, 1 VCHP 0, 1 CLMP SYSV 0, 1 ID1M 0, 1 FPOL 0, 1 BWHT...
  • Page 51 KV-30HS510 Category Name No. Item Name Range Initial Data 3DNR WHCT 0-63 0, 1 NIQM 0-63 CLPW 0-255 CLPP 0-255 YHBW 0-15 YBKL 0, 1 YBKO 0, 1 MUTE 0-127 YHBS 0-255 CHBW 0-127 CBKO 0, 1 CHBO 0-15 VHBL 0-15 UHBL UVDL...
  • Page 52 KV-30HS510 Category Name No. Item Name Range Initial Data 3DNR Others 480i 0-15 Vivid Standard Movie 0, 1 0, 1 0, 1 0, 1 Others 480i 0-31 Vivid Standard Movie Others 480i Vivid Standard Movie 0, 1 Others 480i 0-15 Vivid Standard Movie...
  • Page 53 KV-30HS510 Category Name No. Item Name Range Initial Data 3DNR Others 480i 0-15 Vivid Standard Movie 0, 1 0, 1 Others 480i Vivid Standard Movie Others 480i 0-31 Vivid Standard Movie Others 480i 0-127 Vivid Standard Movie 0-255 NVSL 0, 1 NVSH 0-127 0-255...
  • Page 54 KV-30HS510 Category Name No. Item Name Range Initial Data 3DNR Others 480i 0, 1 Vivid Standard Movie Others 480i 0, 1 Vivid Standard Movie Others 480i 0-15 Vivid Standard Movie Others 480i 0-15 Vivid Standard Movie Others 480i 0, 1 Vivid Standard Movie...
  • Page 55 KV-30HS510 Category Name No. Item Name Range Initial Data DRCV 0, 1 MFVR 0, 1 ISEL CV/YC V5/V6 480i 0-255 Vivid ORES Standard Movie CV/YC V5/V6 480i 0-255 Vivid ONCT Standard Movie CUSTOM1 CUSTOM2 CUSTOM3 0-127 AINI 0-127 BINI 0, 1 FMAT Other FMTH...
  • Page 56 KV-30HS510 Category Name No. Item Name Range Initial Data DRCV SNNR 0-255 0-255 128 128 0-31 DLY1 0-31 DLY2 0-15 DLY3 0-255 OSDH 0, 1 HDPT 0-255 MSBG AACK RAMW — 25-FF —...
  • Page 57: Id Map Tables

    KV-30HS510 4-5. ID MAP TABLES KV-30HS510 30HS510 US 30HS510 CND 0-255 0 ID0 0-255 1 ID1 0-255 2 ID2 0-255 3 ID3 0-255 4 ID4 0-255 5 ID5 0-255 6 ID6 0-255 7 ID7 — 27 —...
  • Page 58: Section 5: Diagrams

    KV-30HS510 SECTION 5: DIAGRAMS 5-1. CIRCUIT BOARDS LOCATION The components identifi ed by shading and symbol are critical for safety. Replace only with part number specifi ed. CX Board The symbol indicates a fast operating fuse and is UBoard displayed on the component side of the board. Replace only WX Board with fuse of the same rating as marked.
  • Page 59: Block Diagrams

    KV-30HS510 5-3. BLOCK DIAGRAMS BLOCK DIAGRAMS (1 OF 3) HS Signal Flow Video7 Video2 RGBYsYm Main Micro M306V7 CV/YC CV/YC EEPROM M24C32 Moni ExtRGB DRC-MF uPD64083 CV/YC RGBYsYm YCbCr CXD2095 Main C.Dec YCbCr CXA2103AQ DRCSW [SW0] NJM2283 CXA2170 ExtYCbCr H:DVI 74LVX157 L:Others H: Sub...
  • Page 60 KV-30HS510 BLOCK DIAGRAMS (2 OF 3) Deflection & HV System Block CXA2170Q STV9379 V DEF VDRV+/VDRV- DY-v Vout V PROT block EW DRV Horizontal deflection EW_DRV Chopper H CENT LA6500 HC_PARA Horizontal H DEF DY-h H Center H DRV/HPROT/HP IN H PROT HP_IN H_DRV...
  • Page 61 KV-30HS510 BLOCK DIAGRAMS (3 OF 3) ����� ������ ���� ��� �� ��� �� ��� ����� ��� ���� ��� � � �� ��� � � �� ���� �� ��� �� ��� � ���� ��� ��� ����� ���� ����� ������ ���� ��� �...
  • Page 62: D Board Schematic Diagram (1 Of 2)

    KV-30HS510 5-4. SCHEMATICS AND SUPPORTING INFORMATION D BOARD SCHEMATIC DIAGRAM (1 OF 2) BOARD CN5509 D BOARD WAVEFORMS CN9100 :S-MICRO R8113 TO P2 330k 1/16W :CHIP — 15V-1 MAIN 9V PG.2 Q8020 R8110 2SD601A 12 Vp-p (H) 330k MAIN 12V R8117 R8118 INVERTER...
  • Page 63: D Board Schematic Diagram (2 Of 2)

    KV-30HS510 D BOARD SCHEMATIC DIAGRAM (2 OF 2) D BOARD TRANSISTOR VOLTAGE LIST Q5001 Q5505 Q5003 10.9 128.8 135.0 Q5002 Q5506 Q5028 63.9 AC RECT+ PS6550 FB6508 FB6509 D6523 ICP-N75-T104 IC6501 +15V D6530 R6526 0.45UH 0.45UH D4SBS6-F Q5004 Q5510 Q5031 TO A CN503 R6517 MCZ3001D...
  • Page 64 KV-30HS510 [H/V DRIVE, H/V DY, POWER SUPPLY, AC RECT DEFLECTION] COMPONENT SIDE C6590 C6585 C8042 R8055 EY170 C6586 VD6500 JW8034 C8063 L8002 R8080 JW8035 EY192 EY120 EY096 EY002 FB8002 R5074 C8046 EY094 M-SENSE SG8002 C6584 AC OUT EY200 EY175 EY174 EY173 EY172 EY035...
  • Page 65 KV-30HS510 [H/V DRIVE, H/V DY, POWER SUPPLY, AC RECT DEFLECTION] CONDUCTOR SIDE — 35 —...
  • Page 66 KV-30HS510 D BOARD LOCATOR LIST DIODE DIODE TRANSISTOR D5001 D6533 IC8004 Q6507 D5002 D6534 IC8005 Q6522 D5003 D6537 IC8006 Q6527 D5004 F-10 D6538 IC8104 Q6530 TRANSISTOR D5005 D8001 Q6532 D5006 D8003 Q5001 F-10 Q8003 D5007 D8005 Q5002 F-10 Q8004 D5008 D8006 Q5003 Q8007...
  • Page 67: M Board Schematic Diagram (1 Of 4)

    KV-30HS510 M BOARD SCHEMATIC DIAGRAM (1 OF 4) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. M BOARD WAVEFORMS TO U CN1503 TO UD CN7002...
  • Page 68: M Board Schematic Diagram (2 Of 4)

    KV-30HS510 M BOARD SCHEMATIC DIAGRAM (2 OF 4) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. L2202 :LB2016 C2226...
  • Page 69: M Board Schematic Diagram (3 Of 4)

    KV-30HS510 Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. M BOARD SCHEMATIC DIAGRAM (3 OF 4) Data is provided for reference only. TO A CN525 POWERCONT CN2302...
  • Page 70: M Board Schematic Diagram (4 Of 4)

    KV-30HS510 M BOARD SCHEMATIC DIAGRAM (4 OF 4) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. Q2505 R2560 R2561...
  • Page 71 KV-30HS510 [VIDEO PROCESSOR, 3D-COMB, MICRO (MAIN, CCD), AUDIO PROCESSOR] [VIDEO PROCESSOR, 3D-COMB, MICRO (MAIN, CCD), AUDIO PROCESSOR] COMPONENT SIDE CONDUCTOR SIDE — 41 —...
  • Page 72: U Board Schematic Diagram

    KV-30HS510 U BOARD SCHEMATIC DIAGRAM U BOARD WAVEFORMS TO MX CN2305 CN1503 :B TO B — 2.2 Vp-p (H) 1.7 Vp-p (H) VIDEO J1509 V5 Y L1502 C1540 R1655 R1656 R1632 — :LB2016 1/16W 1/16W :RN-CP :RN-CP 1/16W MAIN C C1539 :RN-CP V5 PB...
  • Page 73 KV-30HS510 [A/V SWITCH, TERMINAL BLOCK] [A/V SWITCH, TERMINAL BLOCK] COMPONENT SIDE CONDUCTOR SIDE U BOARD LOCATOR LIST U BOARD LOCATOR LIST DIODE TRANSISTOR DIODE DIODE DIODE DIODE TRANSISTOR D1518 Q1501 D1501 D1510 D1520 D1529 Q1504 Q1502 D1502 D1511 D1521 D1530 Q1505 D1503 D1512...
  • Page 74: Bm1C Board Schematic Diagram (1 Of 2)

    KV-30HS510 BM1C BOARD SCHEMATIC DIAGRAM (1 OF 2) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. IC101(1/8) RB107 MD2406...
  • Page 75: Bm1C Board Schematic Diagram (2 Of 2)

    KV-30HS510 BM1C BOARD SCHEMATIC DIAGRAM (2 OF 2) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. RB131 10k*4 :1005...
  • Page 76 KV-30HS510 BM1C BM1C [MEMORY STICK, DECODER BOARD, JPEG ENG] [MEMORY STICK, DECODER BOARD, JPEG ENG] COMPONENT SIDE CONDUCTOR SIDE — 46 —...
  • Page 77: Hm Board Schematic Diagram

    KV-30HS510 HM BOARD SCHEMATIC DIAGRAM Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. TO B CN3603 MEMORY STICK CN7202 R7231...
  • Page 78 KV-30HS510 [MEMORY STICK, TERMINAL BOARD] [MEMORY STICK, TERMINAL BOARD] COMPONENT SIDE CONDUCTOR SIDE — 48 —...
  • Page 79: Ud Board Schematic Diagram

    KV-30HS510 UD BOARD SCHEMATIC DIAGRAM Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. UD BOARD WAVEFORMS CN7001 DVI MOLEX CONN SD-74320-004...
  • Page 80 KV-30HS510 [DVI DECODER] [DVI DECODER] CONDUCTOR SIDE COMPONENT SIDE CN7002 C7002 R7124 R7123 R7080 FL7001 R7087 FL7004 IC7002 FL7003 C7005 DC 5V R7063 R7034 DC 3.3V R7032 R7125 R7115 R7064 R7075 R7114 C7040 C7006 R7072 FL7002 R7047 R7068 R7046 R7067 S7001 R7056 R7069...
  • Page 81: A Board Schematic Diagram (1 Of 2)

    KV-30HS510 A BOARD SCHEMATIC DIAGRAM (1 OF 2) A BOARD WAVEFORM CN513 CN523 CN512 CN525 :MICRO TO B TO MX CN2302 TO MX CN3203 CN2002 — CN510 R646 BIIC 1/16W MS5V MS5V STBY5V 3.3V 1.9 Vp-p (H) TO B CN2804 :CHIP 5V-D 3.3V...
  • Page 82: A Board Schematic Diagram (2 Of 2)

    KV-30HS510 A BOARD SCHEMATIC DIAGRAM (2 OF 2) SIIC CN900 TO DY CN903 :B TO B C912 :MPS :S-MICRO TO D CN5011 VDRV- R920 4.7k — VSIN C909 :MPS R922 +BOCP IC900 4.7k +BOVP +BOVP CONV AMP IC903 D900 D903 ACRLY ACRLY MTZJ-12B...
  • Page 83 KV-30HS510 [AC/DC POWER, AUDIO POWER, TUNER, DY-CONV] COMPONENT SIDE TV PJ TV PJ F501 CN514 T6.3A CN505 EY531 EY532 C512 AC(N) AC(L) JW646 EY563 250V R509 C509 CN901 FH502 JW501 EY914 EY916 EY902 EY903 JW938 EY590 C501 EY569 EY570 JW937 EY577 EY907 EY594...
  • Page 84 KV-30HS510 [AC/DC POWER, AUDIO POWER, TUNER, DY-CONV] CONDUCTOR SIDE A BOARD LOCATOR LIST DIODE D501 IC501 D502 IC502 D503 IC504 D504 IC505 D505 IC508 D-10 D508 IC509 B-10 D509 IC900 G-10 D510 G-11 IC903 H-11 D511 G-11 IC904 H-11 TRANSISTOR D512 G-11 D513...
  • Page 85: B Board Schematic Diagram (1 Of 5)

    KV-30HS510 B BOARD SCHEMATIC DIAGRAM (1 OF 5) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. B BOARD WAVEFORMS R3302 C3329...
  • Page 86: B Board Schematic Diagram (2 Of 5)

    KV-30HS510 Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. B BOARD SCHEMATIC DIAGRAM (2 OF 5) Data is provided for reference only. SUBAD_CLVL —...
  • Page 87: B Board Schematic Diagram (3 Of 5)

    KV-30HS510 Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. B BOARD SCHEMATIC DIAGRAM (3 OF 5) Data is provided for reference only. CN2803 B BOARD WAVEFORMS :S-MICRO...
  • Page 88: B Board Schematic Diagram (4 Of 5)

    KV-30HS510 B BOARD SCHEMATIC DIAGRAM (4 OF 5) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. 5V-1 5V-2 L3011...
  • Page 89: B Board Schematic Diagram (5 Of 5)

    KV-30HS510 B BOARD SCHEMATIC DIAGRAM (5 OF 5) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. TO BM1C CN104 CN3601 R3601...
  • Page 90 KV-30HS510 [AD-DRC, MID-XA, CRT DRIVE, A/D (DNR), DIFFERENTIAL INPUT] COMPONENT SIDE 1-684-698-13 CN2805 172118613 FB3614 FB3608 MADE IN JAPAN L3601 CN3603 Z2803 Q3414 D3603 R3831 FB3613 R2909 C3473 R2907 JR3006 FB3616 >EP-GW< R3849 R2908 FL3601 JR3005 R3857 L3411 L3415 R2887 R2893 R2898 R3832 R3866...
  • Page 91 KV-30HS510 [AD-DRC, MID-XA, CRT DRIVE, A/D (DNR), DIFFERENTIAL INPUT] CONDUCTOR SIDE R3854 C3630 FB3610 R2897 R2892 R2886 C3604 R3508 R2894 R2889 R2883 L3414 R2890 R2884 R3507 L3413 R2895 R3813 R2891 R2885 R3957 C3488 R2896 C3475 R3510 C3459 R3812 Q3404 C3606 CCE400 R3497 R3802...
  • Page 92: Hb Board Schematic Diagram

    KV-30HS510 HB BOARD SCHEMATIC DIAGRAM R1108 1/16W :CHIP R1107 FL1103 1/16W R1105 :RN-CP 0 1/16W :CHIP R1103 J1100 JR1101 — 1/16W :RN-CP JR1103 R1106 1/16W JR1100 :CHIP JR1102 CN1100 D1103 UDZS-TE17-10B R1104 :S-MICRO 0 1/16W :CHIP FL1104 R1102 JR1104 VD1102 TO UX CN1501 M1608C270M 1/16W...
  • Page 93 KV-30HS510 [FRONT TERMINAL] [FRONT TERMINAL] COMPONENT SIDE CONDUCTOR SIDE — 63 —...
  • Page 94: Hc Board Schematic Diagram

    KV-30HS510 HC BOARD SCHEMATIC DIAGRAM KEY INPUT S1003 — D1005 LNK0120022G STBY/STEREO R1017 1/4W KEYWAKE TIMER P-ON STBY-STR-LED R1016 — TIMER-LED 1/4W R1005 R1002 SIRCS 1/4W TV/VIDEO 1/4W VOL+ VOL- D1004 KEY2 LNK0120022G R1003 R1006 2.2k KEY1 1/4W 1/4W STBY 5V S1000 S1005 S1001...
  • Page 95 KV-30HS510 [KEY INPUT, LED. RMC] COMPONENT SIDE [KEY INPUT, LED. RMC] CONDUCTOR SIDE — 65 —...
  • Page 96: Cx Board Schematic Diagram

    KV-30HS510 CX BOARD SCHEMATIC DIAGRAM CX BOARD IC VOLTAGE LIST IC9001 IC9002 IC9003 VOLT VOLT VOLT CN9009 IC9001 TDA6120Q/N2/S1 — RED-VIDEO-OUT R9046 JW(5) CN9002 R9092 NL9002 :CHIP 12.0 12.0 12.0 Q9003 Q9004 Q9005 JW(5) S-MICRO 2SD601A 2SD601A 2SD601A BLK-LMT BLK-LMT BLK-LMT 200V J9001...
  • Page 97 KV-30HS510 [VIDEO OUT] [VIDEO OUT] COMPONENT SIDE CONDUCTOR SIDE — 67 —...
  • Page 98: Wx Board Schematic Diagram

    KV-30HS510 WX BOARD SCHEMATIC DIAGRAM — CN9103 :B-TO-B R9102 TO B CN2803 FB9101 1.1UH — :FPRD CN9102 TO DY +135V CN9105 :S-MICRO C9106 C9108 C9109 C9104 0.0047 R9129 FB9100 250V 500V :S-MICRO 1.1UH F:1608 1/16W :CHIP R9125 R9127 6.8k L9104 C9114 1/16W 1/16W...
  • Page 99 KV-30HS510 WX BOARD IC VOLTAGE LIST WX BOARD TRANSISTOR VOLTAGE LIST IC9100 IC9102 IC9103 VOLT VOLT VOLT Q9100 Q9101 Q9102 Q9103 -12.0 Q9104 -12.0 -12.0 Q9105 Q9106 Q9107 12.0 Q9108 Q9109 All voltages are in V. 12.0 12.0 Q9110 66.7 Q9111 133.8 66.7...
  • Page 100 KV-30HS510 [VELOCITY MOD] COMPONENT SIDE CN9104 JW9115 CN9102 CN9106 C9125 R9128 JW9110 CN9103 JW9107 C9121 R9174 R9173 C9139 C9117 L9104 Q9119 C9135 JW9116 C9127 C9136 JW9117 JW9119 L9102 A9110 A9111 A9102 IC9102 IC9100 JW9105 EY9103 R9185 EY9101 CN9105 C9143 A9100 C9114 JW9114 EY9100...
  • Page 101 KV-30HS510 [VELOCITY MOD] CONDUCTOR SIDE — 71 —...
  • Page 102: Semiconductors (1 Of 2)

    KV-30HS510 5-5. SEMICONDUCTORS (1 OF 2) TOP VIEW 22pin TOP VIEW TOP VIEW TOP VIEW 5pin CXA2026AS 14pin 16pin 32pin M52055FP PST9120NL CXD2085M-T4 BH3868AFS-E2 TLC2932IPW PST9145NL SN74LV4053ANSR TLC2933IPWR-12 TC7SET08FU(TE85L) INDEX TOP VIEW TOP VIEW 240pin 32pin 64pin 48pin TOP VIEW CXD9509AQ CXD2073Q-T4 CXA2103Q...
  • Page 103: Semiconductors (2 Of 2)

    KV-30HS510 SEMICONDUCTORS (2 OF 2) LETTER SIDE PQ09RD21 PQ05RF21 PQ12RF21 PQ30RV21 2SA1776TV2Q STV9379 PQ07VZ012P 2SC3997S-SONY 2SA1309A-QRSTA LETTER SIDE 2SC2688-LK D6SB60L UPC1093J D5SC4M 2SC3840K S1VB20 D1NL40-TA2 D8LC40F CATHODE ANODE ANODE CATHODE MA111-TX CATHODE MA113-TX ANODE UDZSTE-1710B 1SS133T-77 UDZSTE-176.8B D1NL20U-TR PG124S15 MA153-TX...
  • Page 104: Section 6: Exploded Views

    KV-30HS510 SECTION 6: EXPLODED VIEWS Components not identifi ed by a part number or The component parts of an assembly are indicated by the Items marked with an asterisk are not stocked since description are not stocked because they are seldom reference numbers in the far right column of the parts list they are seldom required for routine service.
  • Page 105: Picture Tube

    KV-30HS510 NOTE: The components identifi ed by shading and mark are critical for safety. NOTE: Les composants identifi es per un trame et une marque sont critiques pour Replace only with part number specifi ed. la securite. Ne les remplacer que par une piece portant le numero specifi e. 6-2.
  • Page 106: Beznet

    TAPE (D) 4-076-673-03 DAMPER, DOOR X-4041-823-1 HANDLE ASSY, LEFT (76) 4-072-630-01 CUSHION, DOOR 4-081-009-01 TAPE (D) 4-089-125-11 DOOR 4-080-364-41 BUTTON, POWER 4-042-593-01 SPRING, COMPRESSION 4-080-361-11 GUIDE, LED 4-080-362-12 BUTTON, MULTI 3-704-179-01 EMBLEM (NO.9), SONY X-4041-717-1 CABINET ASSY (72-76) — 76 —...
  • Page 107: Section 7: Electrical Parts List

    KV-30HS510 SECTION 7: ELECTRICAL PARTS LIST NOTE: The components identifi ed by shading The components in this manual identifi ed by the following RESISTORS mark are critical for safety. Replace only • All resistors are in ohms symbol: indicate parts that have been carefully factory- with part number specifi...
  • Page 108 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C2070 1-162-970-11 CERAMIC CHIP 0.01µF C2117 1-164-156-11 CERAMIC CHIP 0.1µF C2071 1-126-963-11 ELECT 4.7µF C2118 1-162-919-11 CERAMIC CHIP 22pF C2072 1-107-826-11 CERAMIC CHIP 0.1µF C2120 1-126-964-11 ELECT 10µF C2073 1-164-156-11...
  • Page 109 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C2349 1-162-968-11 CERAMIC CHIP 0.0047µF 10% C2232 1-164-156-11 CERAMIC CHIP 0.1µF C2352 1-126-933-11 ELECT 100µF C2233 1-164-156-11 CERAMIC CHIP 0.1µF C2353 1-164-156-11 CERAMIC CHIP 0.1µF C2234 1-126-933-11 ELECT 100µF C2354...
  • Page 110 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C2530 1-126-947-11 ELECT 47µF DIODE C2532 1-135-834-91 CERAMIC CHIP 2.2E+06pF 6.3V D2302 8-719-914-44 DIODE DAP202K C2533 1-162-960-11 CERAMIC CHIP 220pF D2303 8-719-914-44 DIODE DAP202K C2534 1-126-947-11 ELECT 47µF D2310 8-719-083-57...
  • Page 111 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES FL2203 1-239-848-21 FILTER, LOW PASS L2008 1-469-555-21 INDUCTOR 10µH FL2204 1-239-848-21 FILTER, LOW PASS L2009 1-469-555-21 INDUCTOR 10µH L2010 1-469-555-21 INDUCTOR 10µH L2011 1-469-555-21 INDUCTOR 10µH L2012 1-469-555-21 INDUCTOR 10µH...
  • Page 112 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES Q2206 8-729-422-27 TRANSISTOR 2SD601A-Q RESISTOR Q2207 8-729-422-27 TRANSISTOR 2SD601A-Q R2001 1-216-809-11 METAL CHIP 1/10W Q2208 8-729-422-27 TRANSISTOR 2SD601A-Q R2002 1-216-821-11 METAL CHIP 1/10W Q2209 8-729-422-27 TRANSISTOR 2SD601A-Q R2003 1-218-686-11 METAL CHIP...
  • Page 113 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2057 1-216-809-11 METAL CHIP 1/10W R2131 1-216-809-11 METAL CHIP 1/10W R2058 1-216-809-11 METAL CHIP 1/10W R2133 1-216-864-11 SHORT CHIP R2059 1-216-809-11 METAL CHIP 1/10W R2201 1-216-821-11 METAL CHIP 1/10W R2061 1-216-828-11...
  • Page 114 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2243 1-216-834-11 METAL CHIP 1/10W R2324 1-216-809-11 METAL CHIP 1/10W R2244 1-216-839-11 METAL CHIP 1/10W R2325 1-216-864-11 SHORT CHIP R2245 1-218-684-11 METAL CHIP 0.50% 1/10W R2326 1-216-809-11 METAL CHIP 1/10W R2246...
  • Page 115 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2371 1-216-809-11 METAL CHIP 1/10W R2470 1-216-833-11 METAL CHIP 1/10W R2372 1-216-809-11 METAL CHIP 1/10W R2471 1-216-833-11 METAL CHIP 1/10W R2373 1-216-809-11 METAL CHIP 1/10W R2472 1-216-833-11 METAL CHIP 1/10W R2374...
  • Page 116 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2530 1-216-809-11 METAL CHIP 1/10W R2577 1-216-837-11 METAL CHIP 1/10W R2531 1-216-821-11 METAL CHIP 1/10W R2578 1-216-821-11 METAL CHIP 1/10W R2532 1-216-837-11 METAL CHIP 1/10W R2579 1-216-837-11 METAL CHIP 1/10W R2533...
  • Page 117 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C1521 1-125-837-91 CERAMIC CHIP 1µF 6.3V CONNECTOR C1522 1-125-837-91 CERAMIC CHIP 1µF 6.3V CN1501 1-764-334-11 PIN, CONNECTOR(PCB)(V TYPE) 11P C1523 1-107-826-11 CERAMIC CHIP 0.1µF CN1502 1-793-173-11 PIN, PC CONNECTOR(PC BOARD) 50P C1524 1-109-982-11 CERAMIC CHIP...
  • Page 118 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES Q1522 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX Q1523 8-729-422-27 TRANSISTOR 2SD601A-Q IC1502 8-752-080-04 CXA2069Q Q1524 8-729-422-27 TRANSISTOR 2SD601A-Q IC1505 8-759-548-56 M52055FP RESISTOR JACK R1501 1-216-853-11 METAL CHIP 470K 1/10W J1501 1-573-967-12 BLOCK, (S) TERMINAL R1502...
  • Page 119 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R1546 1-216-809-11 METAL CHIP 1/10W R1593 1-216-809-11 METAL CHIP 1/10W R1547 1-216-830-11 METAL CHIP 5.6K 1/10W R1594 1-216-830-11 METAL CHIP 5.6K 1/10W R1548 1-216-841-11 METAL CHIP 1/10W R1595 1-216-830-11 METAL CHIP...
  • Page 120 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R1654 1-218-676-11 METAL CHIP 0.50% 1/10W D7204 8-719-800-76 DIODE 1SS226 R1655 1-218-676-11 METAL CHIP 0.50% 1/10W D7205 8-719-800-76 DIODE 1SS226 R1656 1-218-676-11 METAL CHIP 0.50% 1/10W D7206 8-719-800-76 DIODE 1SS226...
  • Page 121 KV-30HS510 HM UD REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R7205 1-218-692-11 METAL CHIP 0.50% 1/10W C7023 1-162-927-11 CERAMIC CHIP 100pF R7206 1-216-809-11 METAL CHIP 1/10W C7024 1-124-779-00 ELECT CHIP 10µF R7207 1-216-809-11 METAL CHIP 1/10W C7025 1-164-156-11...
  • Page 122 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C7070 1-164-156-11 CERAMIC CHIP 0.1µF COIL C7071 1-164-156-11 CERAMIC CHIP 0.1µF L7001 1-412-058-11 INDUCTOR 10µH C7078 1-164-156-11 CERAMIC CHIP 0.1µF L7002 1-412-058-11 INDUCTOR 10µH C7079 1-164-156-11 CERAMIC CHIP 0.1µF C7080 1-164-156-11...
  • Page 123 KV-30HS510 UD B REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R7065 1-216-833-11 METAL CHIP 1/10W R7066 1-218-694-11 METAL CHIP 1.2K 0.50% 1/10W R7067 1-216-833-11 METAL CHIP 1/10W Due to the complexity of this board, performing component level fi eld R7068 1-216-801-11 METAL CHIP...
  • Page 124 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C2840 1-107-826-11 CERAMIC CHIP 0.1µF C3038 1-162-970-11 CERAMIC CHIP 0.01µF C2841 1-107-826-11 CERAMIC CHIP 0.1µF C3040 1-107-826-11 CERAMIC CHIP 0.1µF C2842 1-117-681-11 ELECT CHIP 100µF C3042 1-100-202-21 ELECT CHIP 330µF 6.3V...
  • Page 125 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C3357 1-164-156-11 CERAMIC CHIP 0.1µF C3425 1-125-891-11 CERAMIC CHIP 0.47µF C3358 1-164-156-11 CERAMIC CHIP 0.1µF C3426 1-164-156-11 CERAMIC CHIP 0.1µF C3359 1-126-396-11 ELECT CHIP 47µF C3428 1-107-826-11 CERAMIC CHIP 0.1µF C3360...
  • Page 126 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C3475 1-164-156-11 CERAMIC CHIP 0.1µF C3624 1-164-156-11 CERAMIC CHIP 0.1µF C3476 1-126-394-11 ELECT CHIP 10µF C3625 1-162-919-11 CERAMIC CHIP 22pF C3477 1-164-156-11 CERAMIC CHIP 0.1µF C3626 1-164-156-11 CERAMIC CHIP 0.1µF C3478...
  • Page 127 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES FB3609 1-414-921-11 FERRITE 0µH IC3602 8-759-592-49 TC7SZ125FU(TE85R) FB3610 1-414-921-11 FERRITE 0µH IC3603 8-759-639-85 SN65LVDS31DR FB3611 1-414-921-11 FERRITE 0µH IC3604 6-701-762-11 DS90LV018ATMX FB3612 1-414-921-11 FERRITE 0µH IC3605 8-759-698-08 SN74CBTLV1G125DCKR FB3623 1-414-228-11...
  • Page 128 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES L3603 1-419-370-21 INDUCTOR 0µH Q3403 8-729-422-27 TRANSISTOR 2SD601A-Q L3604 1-419-370-21 INDUCTOR 0µH Q3404 8-729-028-28 TRANSISTOR 2SK2036(TE85L) L3605 1-419-370-21 INDUCTOR 0µH Q3405 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX L3903 1-412-052-21 INDUCTOR 1µH Q3406 8-729-424-02...
  • Page 129 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2829 1-216-825-11 METAL CHIP 2.2K 1/10W R2892 1-216-825-11 METAL CHIP 2.2K 1/10W R2830 1-216-818-11 METAL CHIP 1/10W R2893 1-216-825-11 METAL CHIP 2.2K 1/10W R2831 1-216-825-11 METAL CHIP 2.2K 1/10W R2894...
  • Page 130 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R3043 1-216-864-11 SHORT CHIP R3110 1-216-809-11 METAL CHIP 1/10W R3045 1-216-809-11 METAL CHIP 1/10W R3111 1-216-809-11 METAL CHIP 1/10W R3047 1-216-864-11 SHORT CHIP R3116 1-216-797-11 METAL CHIP 1/10W R3049 1-216-859-11...
  • Page 131 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R3377 1-216-817-11 METAL CHIP 1/10W R3447 1-216-819-11 METAL CHIP 1/10W R3378 1-216-817-11 METAL CHIP 1/10W R3448 1-216-855-11 METAL CHIP 680K 1/10W R3379 1-216-809-11 METAL CHIP 1/10W R3451 1-216-809-11 METAL CHIP 1/10W...
  • Page 132 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R3507 1-216-821-11 METAL CHIP 1/10W R3821 1-218-684-11 METAL CHIP 0.50% 1/10W R3508 1-216-821-11 METAL CHIP 1/10W R3822 1-218-684-11 METAL CHIP 0.50% 1/10W R3509 1-216-821-11 METAL CHIP 1/10W R3823 1-216-826-11 METAL CHIP...
  • Page 133 KV-30HS510 B BM1C REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R3953 1-216-821-11 METAL CHIP 1/10W RB3408 1-239-409-11 NETWORK RESISTOR(CHIP) R3954 1-216-821-11 METAL CHIP 1/10W RB3409 1-239-409-11 NETWORK RESISTOR(CHIP) R3955 1-216-821-11 METAL CHIP 1/10W RB3410 1-239-409-11 NETWORK RESISTOR(CHIP) R3956 1-216-825-11...
  • Page 134 KV-30HS510 BM1C REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C125 1-125-891-11 CERAMIC CHIP 0.47µF FERRITE BEAD C126 1-107-826-11 CERAMIC CHIP 0.1µF FB101 1-414-921-11 FERRITE 0µH C127 1-107-826-11 CERAMIC CHIP 0.1µF FB102 1-414-921-11 FERRITE 0µH C128 1-162-970-11 CERAMIC CHIP 0.01µF...
  • Page 135 KV-30HS510 BM1C REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES RESISTOR R222 1-216-833-11 METAL CHIP 1/10W R226 1-216-833-11 METAL CHIP 1/10W R101 1-216-797-11 METAL CHIP 1/10W R230 1-216-833-11 METAL CHIP 1/10W R102 1-216-797-11 METAL CHIP 1/10W R232 1-218-709-11 METAL CHIP...
  • Page 136 KV-30HS510 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e. with part number specifi...
  • Page 137 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C599 1-126-953-11 ELECT 2200µF CN514 1-766-240-11 PIN, CONNECTOR (PC BOARD) C601 1-164-156-11 CERAMIC CHIP 0.1µF CN515 1-695-915-11 TAB (CONTACT) C604 1-164-156-11 CERAMIC CHIP 0.1µF CN516 1-695-915-11 TAB (CONTACT) C606 1-130-495-00 MYLAR...
  • Page 138 KV-30HS510 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e. with part number specifi...
  • Page 139 KV-30HS510 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e. with part number specifi...
  • Page 140 KV-30HS510 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e. with part number specifi...
  • Page 141 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C5002 1-106-383-00 MYLAR 0.047µF 10% 200V C5060 1-137-417-11 MYLAR 0.015µF 10% 100V C5003 1-162-967-11 CERAMIC CHIP 0.0033µF 10% C5061 1-117-833-21 FILM 5100pF 1.5KV C5004 1-106-383-00 MYLAR 0.047µF 10% 200V C5064 1-117-665-11...
  • Page 142 KV-30HS510 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e. with part number specifi...
  • Page 143 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C8139 1-162-966-11 CERAMIC CHIP 0.0022µF 10% D5512 8-719-062-51 DIODE 1PS226-115 D5513 8-719-404-50 DIODE MA111-TX D5514 8-719-060-90 DIODE S2L60F D5515 8-719-404-50 DIODE MA111-TX CONNECTOR D6502 8-719-979-64 DIODE µF4005PKG23 CN5001 1-779-890-11 CONNECTOR, BOARD TO BOARD...
  • Page 144 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES D8028 8-719-069-54 DIODE UDZSTE-175.1B CHIP CONDUCTOR D8030 8-719-083-66 DIODE UDZSTE-1718B JR5000 1-216-864-11 SHORT CHIP D8034 8-719-921-63 DIODE MTZJ-7.5B JR5001 1-216-864-11 SHORT CHIP D8140 8-719-404-50 DIODE MA111-TX JR5002 1-216-864-11 SHORT CHIP JR5003...
  • Page 145 KV-30HS510 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e. with part number specifi...
  • Page 146 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES Q8034 8-729-422-27 TRANSISTOR 2SD601A-Q R5047 1-249-421-11 CARBON 2.2K 1/4W Q8035 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX R5048 1-216-841-11 METAL CHIP 1/10W R5049 1-216-833-11 METAL CHIP 1/10W R5050 1-216-833-11 METAL CHIP 1/10W RESISTOR R5051...
  • Page 147 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R5103 1-218-700-11 METAL CHIP 2.2K 0.50% 1/10W R5160 1-216-809-11 METAL CHIP 1/10W R5104 1-216-833-11 METAL CHIP 1/10W R5163 1-216-828-11 METAL CHIP 3.9K 1/10W R5105 1-216-841-11 METAL CHIP 1/10W R5164 1-216-845-11...
  • Page 148 KV-30HS510 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e. with part number specifi...
  • Page 149 KV-30HS510 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e. with part number specifi...
  • Page 150 KV-30HS510 D CX A component identifi ed by this symbol indicates that it NOTE: The components identifi ed by shading has been carefully factory-selected to satisfy regulations mark are critical for safety. Replace only regarding X-ray radiation. Should replacement be required, with part number specifi...
  • Page 151 KV-30HS510 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e. with part number specifi...
  • Page 152 KV-30HS510 CX HC HB NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e. with part number specifi...
  • Page 153 KV-30HS510 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES JACK C9111 1-126-964-11 ELECT 10µF C9112 1-162-970-11 CERAMIC CHIP 0.01µF J1100 1-770-053-12 TERMINAL BLOCK, S(LIGHT ANGLE) C9113 1-137-528-11 MYLAR 0.1µF 250V C9114 1-107-636-11 ELECT 10µF 160V C9115 1-137-528-11 MYLAR 0.1µF...
  • Page 154 1/4W R9120 1-218-867-11 METAL CHIP 6.8K 0.50% 1/10W REMOTE COMMANDER 1-477-936-11 REMOTE COMMANDER RM-Y191 4-081-888-01 BATTERY COVER for RM-Y191 Sony Corporation English Sony Technology Center 2003HJ74WEB-1 Technical Services Printed in USA 9-965-952-03 Service Promotion Department © 2003.8 — 124 —...
  • Page 155 In an effort to reduce the size of this pdf fi le the tiled schematics are not attached to this Service Manual. To receive a complete set of the tiled schematics for this manual please submit a request to Nita Wardlaw at nita.wardlaw@am.sony.com.
  • Page 156: Operating Instructions

    4-094-066-21 ® Operating Instructions * Important: Read this manual before using this product © 2003 Sony Corporation KV-30HS510 Sony Corporation Printed in U.S.A. KV-34HS510...
  • Page 157 TV. Refer to them TV screen. These types of imprints are not covered by your whenever you call upon your Sony dealer regarding this product. warranty because they are the result of misuse.
  • Page 158: Important Safeguards

    IMPORTANT SAFEGUARDS Object and Liquid Entry For your protection, please read these instructions completely, and keep this manual for future reference. Never push objects of any kind into the set Carefully observe and comply with all warnings, cautions and through the cabinet slots as they may touch instructions placed on the set, or described in the operating dangerous voltage points or short out parts that instructions or service manual.
  • Page 159 Ventilation Lightning The slots and openings in the cabinet and in the For added protection for this television receiver during a lightning back or bottom are provided for necessary storm, or when it is left unattended and unused for long periods of ventilation.
  • Page 160: Setting Up The Tv

    Setting Up the TV Overview This chapter includes illustrated instructions for setting up your TV. Topic Page(s) TV Controls and Connectors 10-13 Basic Connections: Connecting a Cable or Antenna 14-20 Connecting Optional Equipment VCR and Cable VCR and Cable Box Two VCRs for Tape Editing Satellite Receiver Satellite Receiver and VCR...
  • Page 161: Tv Controls And Connectors

    TV Controls and Connectors Front Panel POWER TIMER STAND BY S VIDEO VIDEO L(MONO) – AUDIO – R TV/VIDEO – VOLUME + – CHANNEL+ VIDEO 2 INPUT...
  • Page 162 Blinks when the TV is turned on, then shuts off when the picture is displayed. If the LED blinks continuously, this may indicate the TV needs service (see “Contacting Sony” on page 84). Infrared Receiver (IR) Receives IR signals from the TV’s remote control.
  • Page 163: Rear Panel

    Rear Panel...
  • Page 164 Primary RF input that connects to your VHF/UHF antenna or cable. 0 CONTROL S Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony IN/OUT infrared-controlled audio or video equipment that has the CONTROL S function.
  • Page 165 Basic Connections: Connecting a Cable or Antenna The way in which you will connect your TV varies, depending on how your home receives a signal (cable, cable box, antenna) and whether or not you plan to connect a VCR. If You Are Connecting See Page Cable or Antenna Only ❏...
  • Page 166: Cable Or Antenna Only

    Cable or Antenna For best results, use one of the following connections if you are connecting a cable or an antenna and you: Only ❑ Do not need a cable box to unscramble channels. (If you have a cable box, see pages 18-20.) ❑...
  • Page 167 Cable and Antenna For best results, use this connection if you: ❑ Only Have a cable and an antenna. (This is convenient if you are using a separate rooftop antenna to receive additional channels that are not provided by your cable company.) ❑...
  • Page 168 Notes on Using This Connection To Do This ... Do This ... Switch the TV’s input Press to switch back and forth between the TV’s VHF/UHF and AUX between the cable and inputs. antenna Receive channels using an Press to switch to the AUX input. antenna, instead of the cable Set the Cable...
  • Page 169 Cable Box and Cable Only ✍ DIGITAL CABLE BOX USERS: Do not use this connection. The TO CONVERTER jack is not compatible with digital cable boxes. For best results, use this connection if: ❑ Your cable company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble all channels.
  • Page 170 To connect the cable box and cable Connect the cable from your cable company to the TV’s VHF/UHF jack. Use a coaxial cable to connect the TV’s TO CONVERTER jack to the cable box’s input jack. (The TV’s internal converter lets you switch between unscrambled signals coming straight into the TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter.)
  • Page 171: Cable Box Only

    Cable Box Only For best results, use this connection if: ❑ Your cable company scrambles all channels, which requires you to use a cable box. ❑ You do not have a VCR. (If you have a VCR, see pages 22 and 24.) With this connection you can: ❑...
  • Page 172: Connecting Optional Equipment

    Connecting Optional Equipment Use the directions in this section to connect the following optional equipment: If You Are Connecting See Page VCR and Cable VCR and Cable Box Two VCRs for Tape Editing Satellite Receiver Satellite Receiver and VCR DVD Player with Component Video Connectors DVD Player with S VIDEO and Audio Connectors...
  • Page 173 VCR and Cable For best results, use this connection if: ❑ Your cable company does not require you to use a cable box. About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features. To connect the VCR and cable Connect the CATV cable to the VCR’s VHF/UHF input jack.
  • Page 174 (VHF/UHF in the illustration). Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See to operate the VCR “Programming the Remote Control” on pages 43-44.
  • Page 175 VCR and Cable Box For best results, use this connection if: ❑ Your cable company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble all channels. About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features.
  • Page 176 VCR input (VIDEO 1 in the illustration). Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See to operate the cable box or “Programming the Remote Control” on pages 43-44.
  • Page 177: Two Vcrs For Tape Editing

    Two VCRs for Tape Connecting two VCRs lets you record from one VCR to the other. By Editing connecting them as shown below, you can view (monitor) what is being recorded. Using To connect two VCRs for tape editing S VIDEO jacks? Use an A/V cable to connect the playback VCR’s A/V output See page 21.
  • Page 178 VCR input (VIDEO 1 in the recorded illustration above). Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See to operate the VCR(s) “Programming the Remote Control” on pages 43-44. Activate the TV remote Open the outside cover, as shown on page 42.
  • Page 179: Satellite Receiver

    Satellite Receiver To connect a satellite receiver Connect the satellite antenna cable to the satellite receiver’s satellite input jack. Using Use an A/V cable to connect the satellite receiver’s A/V output S VIDEO jacks? jacks to the TV’s A/V input jacks. See page 21.
  • Page 180 (VIDEO 1 in the illustration). Set up the TV remote control to operate the If you have a non-Sony satellite receiver, you must program satellite receiver the remote control. See “Programming the Remote Control”...
  • Page 181: Satellite Receiver And Vcr

    Satellite Receiver To connect a satellite receiver and VCR and VCR Connect the satellite antenna cable to the satellite receiver’s satellite input jack. Connect the CATV cable to the VCR’s VHF/UHF input jack. Using Use a coaxial cable to connect the VCR’s VHF/UHF output jack S VIDEO jacks? to the TV’s VHF/UHF jack.
  • Page 182 VCR is connected (VIDEO 1 in the illustration). Set up the TV remote control If you have a non-Sony VCR or satellite receiver, you must program the to operate the satellite remote control. See “Programming the Remote Control” on pages 43-44.
  • Page 183: Dvd Player With Component Video

    DVD Player with For best results, use this connection if your DVD player has Component component video (Y, P ) jacks. Video Connectors To connect a DVD player with component video connectors Use three separate component video cables to connect the DVD player’s Y, P and P jacks to the Y, P...
  • Page 184 DVD input (VIDEO 5 in the illustration). Set up the TV remote control If you have a non-Sony DVD player, you must program the remote control. to operate the DVD player See “Programming the Remote Control” on pages 43-44.
  • Page 185: Dvd Player With S Video And Audio

    DVD input (VIDEO 1 in the illustration). Set up the TV remote control If you have a non-Sony DVD player, you must program the remote control. to operate the DVD player See “Programming the Remote Control” on pages 43-44.
  • Page 186: Camcorder

    Camcorder For easy connection of a camcorder, the TV has front A/V input jacks. If you prefer, however, you can connect the camcorder to the TV’s rear A/V input jacks. Using S VIDEO jacks? To connect a camcorder See page 21. Use A/V cables to connect the camcorder’s A/V output jacks to the TV’s A/V input jacks.
  • Page 187: Audio Receiver

    Audio Receiver For improved sound quality, you may want to play the TV’s audio through your stereo system. To connect an audio system Use an audio cable to connect the TV’s audio output jacks to the audio receiver’s line input jacks. Audio cable Receiver Cables are often...
  • Page 188: Using The Control S Feature

    Using the CONTROL S Feature CONTROL S allows you to control your system and other Sony equipment with one remote control. In addition to allowing you to control multiple devices with one remote control, the CONTROL S feature allows you to always point your remote control at your TV, instead of having to point it at the other equipment, which might be hidden or out of direct line of sight.
  • Page 189: Setting Up The Channel List

    Setting Up the Channel List After you finish connecting your TV, you need to run Auto Setup to set up your channels. The Auto Setup screen appears when you turn on your TV for the first time after hooking it up. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel Menu (see page 72).
  • Page 190: Optional Accessories

    Specifications ® Picture Tube FD Trinitron tube Antenna 75 ohm external terminal for VHF/UHF Television System NTSC, American TV Standard Channel Coverage 2-13 14-69 CATV 1-125 Power Requirements 120V, 60 Hz Inputs/Outputs DVI-HDTV 1 terminal, 3.3V T.M.D.S., 50 ohms The DVI-HDTV input terminal is compliant with the EIA-861 standard and is not intended for use with personal computers.
  • Page 191: Limited Warranty

    1. LABOR: For a period of 90 days from the date of purchase, if this Product is determined to be defective, Sony will repair or replace the Product, at its option, at no charge, or pay the labor charges to any Sony authorized service facility.

Table of Contents