8
Getting Started - Cordless Configuration
Before using the Imager, charge the battery. The 8-Bay Battery Charger supports
both standard and extended capacity batteries.
Charge the Battery
To charge the Imager battery, refer to SAC5070 Quick Start Guide.
Install the Battery
Align the Battery on top of the Imager.
1.
Push the battery all the way into the
2.
Locking Slots of the Imager.
Firmly press the Battery into the Imager
3.
until a "click" is heard ensuring the
Battery Release Latch is fully engaged
with the Imager.
Remove the Battery
Hold the Imager in one hand.
1.
Press the Battery Release Latch.
2.
Pull up the Battery to release from the Locking Slots of the Imager.
3.
Wear the Imager
Slide the Imager onto the index and middle fingers with the Scan Trigger next
1.
to the thumb.
Scan Trigger
RS507 Hands-Free Imager
Battery Release
Latch
Battery
Locking Slots